Search NASA⌕ Search

Engineering topics

Richman, E K

Publications and source records attributed to Richman, E K.

Vertically Oriented Hexagonal Mesoporous Films Formed Through Nanometre-Scale Epitaxy

Polymer- and surfactant-templated mesoporous inorganic materials offer a unique combination of controllable nanoscale architecture, materials variation and low-cost solution processing. Inorganic materials can be produced with a range of periodic pore structures, with feature size ranging from 2 to 30 nm, and from a diverse set of materials. Unfortunately in thin-film form, the pores of the ubiquitous hexagonal honeycomb phase tend to lie in the plane of the substrate making these materials unsuitable for applications where diffusion into the pores is required. Here, we show that nanometre-scale epitaxy on a patterned substrate can be used to form vertically oriented pores in honeycomb-structured films. We use the surface of cubic mesoporous films to form the pattern; as such, our method does not sacrifice the simple processing advantages of a self-assembled system. A precise lattice match between the hexagonal and cubic films is needed for vertical orientation, a condition that can be achieved using mixed templates or selective pore swelling. Pore orientation is characterized by a combination of microscopy and diffraction. Here, we present alignment data on oriented nanopores in the 10--15 nm range, but the method should be applicable across the 2--30 nm pore size range of these self-organized materials.

36 MATERIALS SCIENCE↗

Ordered Mesoporous Silicon Through Magnesium Reduction of Polymer Templated Silica Thin Films

This paper describes the process of making ordered mesoporous silicon (Si) thin films. The process begins with mesoporous silica (SiO{sub 2}) thin films that are produced via evaporation induced self-assembly (EISA) using sol-gel silica precursors with a diblock copolymer template. This results in a film with a cubic lattice of 15 nm diameter pores and 10 nm thick walls. The silicon is produced through reduction of the silica thin films in a magnesium (Mg) vapor at 675 {sup o}C. Magnesium reduction preserves the ordered pore-solid architecture but replaces the dense silica walls with 10--17 nm silicon crystallites. The resulting porous silicon films are characterized by a combination of low and high angle X-ray diffraction, combined with direct SEM imaging. The result is a straightforward route to the production of ordered nanoporous silicon.

36 MATERIALS SCIENCE↗