Engineering topics

Riggins, David W.

Publications and source records attributed to Riggins, David W..

9 records

NASA NTRS2002

Analysis of the Magneto-Hydrodynamic (MHD) Energy Bypass Engine for High-Speed Air-Breathing Propulsion

The performance of the MHD energy bypass air-breathing engine for high-speed propulsion is analyzed in this investigation. This engine is a specific type of the general class of inverse cycle engines. In this paper, the general relationship between engine performance (specific impulse and specific thrust) and the overall total pressure ratio through an engine (from inlet plane to exit plane) is first developed and illustrated. Engines with large total pressure decreases, regardless of cause or source, are seen to have exponentially decreasing performance. The ideal inverse cycle engine (of which the MHD engine is a sub-set) is then demonstrated to have a significant total pressure decrease across the engine; this total pressure decrease is cycle-driven, degrades rapidly with energy bypass ratio, and is independent of any irreversibility. The ideal MHD engine (inverse cycle engine with no irreversibility other than that inherent in the MHD work interaction processes) is next examined and is seen to have an additional large total pressure decrease due to MHD-generated irreversibility in the decelerator and the accelerator. This irreversibility mainly occurs in the deceleration process. Both inherent total pressure losses (inverse cycle and MHD irreversibility) result in a significant narrowing of the performance capability of the MHD bypass engine. The fundamental characteristics of MHD flow acceleration and flow deceleration from the standpoint of irreversibility and second-law constraints are next examined in order to clarify issues regarding flow losses and parameter selection in the MM modules. Severe constraints are seen to exist in the decelerator in terms of allowable deceleration Mach numbers and volumetric (length) required for meaningful energy bypass (work interaction). Considerable difficulties are also encountered and discussed due to thermal/work choking phenomena associated with the deceleration process. Lastly, full engine simulations utilizing inlet shock systems, finite-rate chemistry, wall cooling with thermally balanced engine (fuel heat sink), fuel injection and mixing, friction, etc. are shown and discussed for both the MHD engine and the conventional scramjet. The MHD bypass engine has significantly lower performance in all categories across the Mach number range (8 to 12.2). The lower performance is attributed to the combined effects of 1) additional irreversibility and cooling requirements associated with the MHD components and 2) the total pressure decrease associated with the inverse cycle itself.

Riggins, David W.↗

NASA NTRS2000

Performance Investigation and Characterization of Scramjet and Dual-Mode Scramjet Flow-Fields

The following compilation documents significant deliverables under this grant. Note that this summary is extracted from a larger report provided to the Hyper-X office last year at the conclusion of the grant. Current status is documented of the ongoing JANNAF (Joint-Army-Navy-NASA-AirForce) Scramjet Test standards activity from the standpoint of the Analysis SubGroup of which the PI was requested by NASA to be chairman. Also included are some representative contributions to date from the Principle investigator relating to this activity.

Riggins, David W.↗

NASA NTRS1993

The validation and application of numerical modelling to supersonic mixing and reacting flows

This study demonstrates that the computational fluid dynamics (CFD) code GASP can be used to predict the features for flowfields representative of scramjet combustors. The validation program undertaken was composed of two parts: a low enthalpy mixing study and a simplified autoignition study. The low enthalpy mixing study was done using low angle helium injection into a Mach 6 airstream over a flat plate. Both matched and overpressurized injection cases were numerically modelled. The agreement with experimental data for the farfield bulk mixing in both cases was reasonable. The combustion studies modelled premixed hydrogen-air reaction with the results being evaluated qualitatively. GASP proved to be highly sensitive to the chemical species present for flow near the ignition temperature, but provided reasonable qualitative results for a subsonic flameholder model.

Vitt, Paul H.↗

NASA NTRS1991

CFD evaluation of Mach 17 HYPULSE scramjet combustor data

Three-dimensional finite rate chemistry solutions are performed on a single fuel injector configuration. The results are compared with limited experimental data obtained from the HYPULSE expansion tube facility at simulated flight Mach 17 flow conditions. All comparisons, except for wall heat flux, were in excellent agreement. Key findings from this study are useful in interpretation of the experimental measurements.

Bobskill, Glenn J.↗

NASA NTRS1991

Efficient use of direct solvers for the calculation of compressible flows

While the direct solution of systems of linear equations resulting from fluid dynamic problems has generally not been practical in the past, it is presently demonstrated that the direct method is often more efficient than the most popular iterative schemes when constructed in such a way as to take advantage of presently available vector processing capabilities and large memory. The vertical line Gauss-Seidel algorithm was chosen as the iterative method to be compared with the direct method. It is fond that the direct method becomes efficient only when large residual reductions are desired.

Riggins, David W.↗

NASA NTRS1991

Numerical simulation of transverse fuel injection

A review of recent work at NASA Langley Research Center to compare the predictions of transverse fuel injector flow fields and mixing performance with experimental results is presented. Various cold (non-reactive) mixing studies were selected for code calibration which include the effects of boundary layer thickness and injection angle for sonic hydrogen injection into supersonic air. Angled injection of helium is also included. This study was performed using both the three-dimensional elliptic and the parabolized Navier-Stokes (PNS) versions of SPARK. Axial solution planes were passed from PNS to elliptic and elliptic to PNS in order to efficiently generate solutions. The PNS version is used both upstream and far downstream of the injector where the flow can be considered parabolic in nature. The comparisons are used to identify experimental deficiencies and computational procedures to improve agreement.

Mao, Marlon↗

NASA NTRS1990

A computational investigation of flow losses in a supersonic combustor

This computational investigation provides a detailed comparative study of both non-reacting and reacting supersonic combustor flow-fields and attendant flow losses. Three different injection configurations in the same combustor are examined; a swept-sided ramp with base hydrogen injection, a straight ramp with base hydrogen injection and a thirty-degree downstream directed wall jet. Detailed comparisons are made with available reacting experimental data for the swept and the unswept ramps. A seven reaction, seven species reaction model as well as a global (one reaction) model are used for all three reacting cases. Relative performance (as measured by thrust) of all cases are described. Details of the flow, mixing, and combustion processes are discussed.

Riggins, David W.↗

NASA NTRS1990

Supersonic combustor modeling

The physical phenomena involved when a supersonic flow undergoes chemical reaction are discussed. Detailed physical models of convective and diffusive mixing, and finite rate chemical reaction in supersonic flow are presented. Numerical algorithms used to solve the equations governing these processes are introduced. Computer programs using these algorithms are used to analyze the structure of the reacting mixing layer. It is concluded that, as in subsonic flow, exothermic heat release in unconfined supersonic flows retards fuel/air mixing. Non mixing is shown to be a potential problem in reducing the efficiency of supersonic as well as subsonic combustion. Techniques for enhancing fuel/air mixing and combustion are described.

Riggins, David W.↗

NASA NTRS1989

Mixing enhancement in a supersonic combustor

Research has been conducted for a number of years at the NASA Langley Research Center to develop a supersonic combustion ramjet (scramjet) capable of propelling a vehicle at hypersonic speeds in the atmosphere or beyond. Recently, that research has been directed toward the optimization of the scramjet combustor, and in particular the efficiency of fuel-air mixing and reaction in the engine. This paper describes a numerical study of fuel-air mixing and reaction in a supersonic combustor, and discusses the analysis of a technique that was used to enhance the mixing processes and overall combustion efficiency in the flow. Based on the results of that study, conclusions are drawn regarding the applicability of the technique to enhance mixing in a scramjet combustor.

Drummond, J. Philip↗