Engineering topics

Rignot, Eric J.

Publications and source records attributed to Rignot, Eric J..

10 records

NASA NTRS2007

Radar Interferometer for Topographic Mapping of Glaciers and Ice Sheets

A report discusses Ka-band (35-GHz) radar for mapping the surface topography of glaciers and ice sheets at high spatial resolution and high vertical accuracy, independent of cloud cover, with a swath-width of 70 km. The system is a single- pass, single-platform interferometric synthetic aperture radar (InSAR) with an 8-mm wavelength, which minimizes snow penetration while remaining relatively impervious to atmospheric attenuation. As exhibited by the lower frequency SRTM (Shuttle Radar Topography Mission) AirSAR and GeoSAR systems, an InSAR measures topography using two antennas separated by a baseline in the cross-track direction, to view the same region on the ground. The interferometric combination of data received allows the system to resolve the pathlength difference from the illuminated area to the antennas to a fraction of a wavelength. From the interferometric phase, the height of the target area can be estimated. This means an InSAR system is capable of providing not only the position of each image point in along-track and slant range as with a traditional SAR but also the height of that point through interferometry. Although the evolution of InSAR to a millimeter-wave center frequency maximizes the interferometric accuracy from a given baseline length, the high frequency also creates a fundamental problem of swath coverage versus signal-to-noise ratio. While the length of SAR antennas is typically fixed by mass and stowage or deployment constraints, the width is constrained by the desired illuminated swath width. As the across-track beam width which sets the swath size is proportional to the wavelength, a fixed swath size equates to a smaller antenna as the frequency is increased. This loss of antenna size reduces the two-way antenna gain to the second power, drastically reducing the signal-to-noise ratio of the SAR system. This fundamental constraint of high-frequency SAR systems is addressed by applying digital beam-forming (DBF) techniques to synthesize multiple simultaneous receive beams in elevation while maintaining a broad transmit illumination. Through this technique, a high antenna gain on receive is preserved, thereby reducing the required transmit power and thus enabling high-frequency SARs and high-precision InSAR from a single spacecraft.

Moller, Delwyn K.↗

NASA NTRS1995

Spaceborne Applications of P Band Imaging Radars for Measuring Forest Biomass

In three sites of boreal and temperate forests, P band HH, HV, and VV polarization data combined estimate total aboveground dry woody biomass within 12 to 27% of the values derived from allometric equations, depending on forest complexity. Biomass estimates derived from HV-polarization data only are 2 to 14% less accurate. When the radar operates at circular polarization, the errors exceed 100% over flooded forests, wet or damaged trees and sparse open tall forests because double-bounce reflections of the radar signals yield radar signatures similar to that of tall and massive forests. Circular polarizations, which minimize the effect of Faraday rotation in spaceborne applications, are therefore of limited use for measuring forest biomass. In the tropical rain forest of Manu, in Peru, where forest biomass ranges from 4 kg/sq m in young forest succession up to 50 kg/sq m in old, undisturbed floodplain stands, the P band horizontal and vertical polarization data combined separate biomass classes in good agreement with forest inventory estimates. The worldwide need for large scale, updated, biomass estimates, achieved with a uniformly applied method, justifies a more in-depth exploration of multi-polarization long wavelength imaging radar applications for tropical forests inventories.

Rignot, Eric J.↗

NASA NTRS1995

Frequency-Channelized SAR Processing For Multiple Angle Looks

Technique for processing synthetic-aperture-radar (SAR) signals exploits fact that center frequency of frequency channel of data being processed linked directly to squint angle and to azimuth angle. Also exploits fact in multilook SAR data processing, total bandwidth of each SAR polarization channel divided into N (typically, N = 16) equal frequency channels, data in each of which processed separately. Technique has yielded data on directionality of radar back scatter from agricultural fields.

Dubois, Pascale C.↗

NASA NTRS1995

On the potential of long wavelength imaging radars for mapping vegetation types and woody biomass in tropical rain forests

In the tropical rain forests of Manu, in Peru, where forest biomass ranges from 4 kg/sq m in young forest succession up to 100 kg/sq m in old, undisturbed floodplain stands, the P-band polarimetric radar data gathered in June of 1993 by the AIRSAR (Airborne Synthetic Aperture Radar) instrument separate most major vegetation formations and also perform better than expected in estimating woody biomass. The worldwide need for large scale, updated biomass estimates, achieved with a uniformly applied method, as well as reliable maps of land cover, justifies a more in-depth exploration of long wavelength imaging radar applications for tropical forests inventories.

Rignot, Eric J.↗

NASA NTRS1995

Spaceborne Applications of P-Band Imaging Radars for Measuring Forest Biomass

In three test sites of boreal and temperate forests, P-band polarimetric radar data estimate total above-ground dry woody biomass with 10 to 30 of the actual biomass values, depending on the complexity of the forest. A description and examples of the process are provided. The worldwide need for large scale, updated biomass estimates, achieved with a uniformly applied method, justifies a more in-depth exploration of long wavelength imaging radar applications for tropical forest inventories.

Oren, Ram↗

NASA NTRS1994

Unsupervised Segmentation Of Polarimetric SAR Data

Method of unsupervised segmentation of polarimetric synthetic-aperture-radar (SAR) image data into classes involves selection of classes on basis of multidimensional fuzzy clustering of logarithms of parameters of polarimetric covariance matrix. Data in each class represent parts of image wherein polarimetric SAR backscattering characteristics of terrain regarded as homogeneous. Desirable to have each class represent type of terrain, sea ice, or ocean surface distinguishable from other types via backscattering characteristics. Unsupervised classification does not require training areas, is nearly automated computerized process, and provides nonsubjective selection of image classes naturally well separated by radar.

Rignot, Eric J.↗

NASA NTRS1994

Segmentation Of Multifrequency Complex-Amplitude SAR Data

Several mathematical models and associated algorithms implement method of segmenting multifrequency, highly speckled, high-resolution, complex-amplitude (amplitude and phase) synthetic-aperture-radar (SAR) digitized image into regions, within each of which radar backscattering characteristics are similar or homogeneous from place to place. Typically, each region represents different type of terrain or other surface; e.g., forest, agricultural land, sea ice, or water. Method of segmentation of SAR scene into regions is product of generalization, to multifrequency case, of single-frequency method described in "Algorithms for Segmentation of Complex-Amplitude SAR Data" (NPO-18524).

Rignot, Eric J.↗

NASA NTRS1993

Segmentation Of Multifrequency, Multilook SAR Data

Segmentation of multifrequency, multilook synthetic-aperture radar (SAR) image intensity data into regions, within each of which backscattering characteristics of target scene considered homogeneous, enhanced by use of two statistical models. One represents statistics of multifrequency, multilook speckled intensities of SAR picture elements; other represents statistics of labels applied to regions into which picture elements grouped. Each region represents different type of terrain, terrain cover, or other surface; e.g., forest, agricultural land, sea ice, or water. Segmentation of image into regions of neighboring picture elements accomplished by method similar to that described in "Algorithms For Segmentation Of Complex-Amplitude SAR Data" (NPO-18524).

Rignot, Eric J.↗

NASA NTRS1993

Statistical Approach To Determination Of Texture In SAR

Paper presents statistical approach to analysis of texture in synthetic-aperture-radar (SAR) images. Objective: to extract intrinsic spatial variability of distributed target from overall spatial variability of SAR image.

Rignot, Eric J.↗

NASA NTRS1992

Statistical Approach To Extraction Of Texture In SAR

Improved statistical method of extraction of textural features in synthetic-aperture-radar (SAR) images takes account of effects of scheme used to sample raw SAR data, system noise, resolution of radar equipment, and speckle. Treatment of speckle incorporated into overall statistical treatment of speckle, system noise, and natural variations in texture. One computes speckle auto-correlation function from system transfer function that expresses effect of radar aperature and incorporates range and azimuth resolutions.

Rignot, Eric J.↗