Search NASA⌕ Search

Engineering topics

Riley, Brian J

Publications and source records attributed to Riley, Brian J.

27 records · Page 2

Summary Report for the Development of Materials for Volatile Radionuclides

The materials development summarized here is in support of the Waste Forms campaign, Volatile Radionuclide task. Specifically, materials are being developed for the removal and immobilization of iodine and krypton, specifically 129I and 85Kr. During FY 2010, aerogel materials were investigated for removal and immobilization of 129I. Two aerogel formulations were investigated, one based on silica aerogels and the second on chalcogenides. For 85Kr, metal organic framework (MOF) structures were investigated.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ALKALI/ AKALINE-EARTH CONTENT EFFECTS ON PROPERTIES OF HIGH-ALUMINA NUCLEAR WASTE GLASSES

A series of high alumina (>20 mass %) borosilicate glasses have been made and characterized based on the assumption that the primary modifier cation field strength plays a significant role in mediating glass structure of nuclear waste glasses. Any crystallization upon quenching or after heat treatment at 950 °C for 24 hours was identified and quantified by X-ray diffraction. Particular note was take of any aluminosilicates formed, such as those in the nepheline group (MAlSiO4 where M=K, Na, Li), as these remove multiple glass-formers from the network upon crystallization. The relative roles of potassium, sodium, lithium, calcium, and magnesium on glass structure and crystallization in high alumina glasses were explored using Raman and infrared vibrational spectroscopy. Strong evidence was found for the importance of 4 membered rings in glasses with 10 mol % alkaline earths (Ca, Mg).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cluster formation of silica particles in glass batches during melting

The study describes the incorporation of solid silica into molten glass during glass-batch melting as a function of the grain size in the range from 5 to 275 µm. Whereas tiny grains formed a bubbly melt, very large grains formed slowly dissolving cluster. Silica grains are forced to clusters by rising bubbles. The impact of the silica grain size on the glass-forming melt viscosity, overall density, thermal conductivity, and compositional homogeneity, as well as the consequences of these effects on glass processing in melting furnaces, is discussed. A high-alumina borosilicate glass for nuclear waste vitrification was chosen for the study, but the authors believe that the observed behaviors occur also in melting of commercial batches.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structure-Optical Property Correlations of Arsenic Sulfide Glasses in Visible, Infrared, and Sub-millimeter Regions

Optical properties and structural aspects of AsxS100-x glasses from visible to terahertz wavelengths were explored. A series of annealed, bulk AsxS100-x glasses (x = 30 to 42) were made and their refractive indices determined at terahertz, infrared, and visible frequencies using a combination of a quasi-optical backwards wave oscillator spectrometer for terahertz measurements and a prism coupler for visible and infrared measurements. It was found that refractive index at all frequencies increases with arsenic composition up to 40 atomic % arsenic then decreases with additional arsenic. Structure in x-ray diffraction patterns support the notion of a minimum volume at 40 atomic %, while the average covalent coordination number indicates the rigidity percolation threshold is reached there. At As concentrations > 40 atomic %, the network becomes over-constrained, the molar volume increases.

36 MATERIALS SCIENCE↗

The Predictive Power of Electronic Polarizability for Tailoring the Refractivity of High Index Glasses Optical Basicity Versus the Single Oscillator Model

Four compositions of high density (~8 g/cm3) heavy metal oxide glasses composed of PbO, Bi2O3, and Ga2O3 were produced and refractivity parameters (refractive index and density) were computed and measured. Optical basicity was computed using three different models – average electronegativity, ionic-covalent parameter, and energy gap – and the basicity results were used to compute oxygen polarizability and subsequently refractive index. Refractive indices were measured in the visible and infrared at 0.633 μm, 1.55 μm, 3.39 μm, 5.35 μm, 9.29 μm, and 10.59 μm using a unique prism coupler setup, and data were fitted to the Sellmeier expression to obtain an equation of the dispersion of refractive index with wavelength. Using this dispersion relation, single oscillator energy, dispersion energy, and lattice energy were determined. Oscillator parameters were also calculated for the various glasses from their oxide values as an additional means of predicting index. Calculated dispersion parameters from oxides underestimate the index by 3 to 4%. Predicted glass index from optical basicity, based on component oxide energy gaps, underpredicts the index at 0.633 μm by only 2%, while other basicity scales are less accurate. The predicted energy gap of the glasses based on this optical basicity overpredicts the Tauc optical gap as determined by transmission measurements by 6 to 10%. These results show that for this system, density, refractive index in the visible, and energy gap can be reasonably predicted using only composition, optical basicity values for the constituent oxides, and partial molar volume coefficients. Calculations such as these are useful for a priori prediction of optical properties of glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Binary Phase Diagram of the Manganese Oxide-Iron Oxide System

In this study, the MnOx-FeOx binary system was measured within a temperature range of 750 to 1590°C in an atmosphere of air. Multiple measurement methods were employed to accurately measure the phase boundaries, including isothermal heat-treatments followed by rapid quenching, dilatometery, differential thermal analyses with thermogravimetric analyses, and hot-stage X-ray diffraction (XRD). Phase assemblage in each sample was determined by XRD. Data were compared with literature, and a new, self consistent phase diagram was developed. The results are reported along with background information and a comparison with previously reported data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Initial Laboratory-Scale Melter Test Results for Combined Fission Product Waste

This report describes the methods and results used to vitrify a baseline glass, CSLNTM-C-2.5 in support of the AFCI (Advanced Fuel Cycle Initiative) using a Quartz Crucible Scale Melter at the Pacific Northwest National Laboratory. Document number AFCI-WAST-PMO-MI-DV-2009-000184.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis and Characterization of Bulk Vitreous Cadmium Germanium Arsenide

Abstract Cadmium-germanium-diarsenide (“CGA”) glasses were synthesized in bulk form (~2.4 cm3) using the procedures adapted from the literature. Several issues involved in the fabrication and quenching of amorphous CdGexAs2 (x = 0.45, 0.65, 0.85, 1.00) are described. An innovative processing route is presented to enable quenching of vitreous, crack-free ingots with sizes up to 10 mm diameter, and 30 – 40 mm long. Specimens from selected ingots were characterized using thermal analysis, optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, particle-induced X-ray emission, Rutherford backscattering, secondary ion mass spectrometry, X-ray diffraction, density, and optical spectroscopy. Variations in properties as a function of processing conditions and composition are described. Results show that the density of defect states in the middle of the band gap and near the band edges can be decreased three ways: through suitable control of the processing conditions, by doping the material with hydrogen, and by increasing the concentration of Ge in the glass.

08 HYDROGEN↗

DC Ionization Conductivity of Amorphous Semiconductors for Radiation Detection Applications

DC ionization conductivity measurements were used to characterize the electrical response of amorphous semi-conductors to ionizing radiation. Two different glass systems were examined: a chalcopyrite glass (CdGexAs2; for x = 0.45-1.0) with a tetrahedrally coordinated structure and a chalcogenide glass (As40Se(60-x)Tex; where x = 0-12), with a layered or three dimensionally networked structure, depending on Te content. Changes in DC ionization current were measured as a function of the type of radiation (α or γ), dose rate, applied bias voltage, specimen thickness and temperature. These results demonstrate the potential of these materials for radiation detection applications.

36 MATERIALS SCIENCE↗