Search NASA⌕ Search

Engineering topics

Ritt, Cody L.

Publications and source records attributed to Ritt, Cody L..

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Environmental damping and vibrational coupling of confined fluids within isolated carbon nanotubes

Abstract Because of their large surface areas, nanotubes and nanowires demonstrate exquisite mechanical coupling to their surroundings, promising advanced sensors and nanomechanical devices. However, this environmental sensitivity has resulted in several ambiguous observations of vibrational coupling across various experiments. Herein, we demonstrate a temperature-dependent Radial Breathing Mode (RBM) frequency in free-standing, electron-diffraction-assigned Double-Walled Carbon Nanotubes (DWNTs) that shows an unexpected and thermally reversible frequency downshift of 10 to 15%, for systems isolated in vacuum. An analysis based on a harmonic oscillator model assigns the distinctive frequency cusp, produced over 93 scans of 3 distinct DWNTs, along with the hyperbolic trajectory, to a reversible increase in damping from graphitic ribbons on the exterior surface. Strain-dependent coupling from self-tensioned, suspended DWNTs maintains the ratio of spring-to-damping frequencies, producing a stable saturation of RBM in the low-tension limit. In contrast, when the interior of DWNTs is subjected to a water-filling process, the RBM thermal trajectory is altered to that of a Langmuir isobar and elliptical trajectories, allowing measurement of the enthalpy of confined fluid phase change. These mechanisms and quantitative theory provide new insights into the environmental coupling of nanomechanical systems and the implications for devices and nanofluidic conduits.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Orientation matters: Measuring the correct surface of polyamide membranes with quartz crystal microbalance

The surface of polyamide reverse osmosis (RO) membranes which regulates interface-dominated phenomena, such as partitioning and fouling, is the one facing the feed during operation. However, the opposite surface of the polyamide selective layer, the one facing the permeate and in contact with the polysulfone porous support, is commonly analyzed in quartz crystal microbalance (QCM) measurements due to limitations of state-of-the-art transfer methodologies. Such measurements on the back surface cannot be generalized because the polyamide layer is chemically and morphologically asymmetric. Herein, we introduce a simple method to coat QCM sensors with polyamide active layers in the correct orientation (i.e., exposing their front surface) and show that interface-dominated phenomena differ significantly between orientations. We start by describing a transfer protocol to coat any surface with a polyamide layer on its front surface orientation. We then systematically analyze the chemical and morphological differences between the two surfaces of the polyamide layer of a commercial RO membrane. Finally, we demonstrate that interface-dominated phenomena depend on the orientation by showing that NaCl partitioning at pH 6 was 1.3 to 2.3-fold higher on the front surface and that organic fouling with humic acid occurred at a lower rate on this surface. The new method presented herein enables measurements on the front surface of polyamide RO membranes, which should be the standard in any future QCM studies.

Fouling behavior↗
DOE OSTI2023

Influence of graphite geography on the yield of mechanically exfoliated few-layer graphene

Some of graphene's exciting properties that inspired countless studies over the last two decades are exclusive to defect-free, few-layer graphene (FLG, ≤4 layers) produced by mechanical exfoliation. Despite graphite exfoliation having been thoroughly studied, the influence of the graphite source on the successful exfoliation of FLG remains unexplored. Here, in this work, we examine the physicochemical properties and exfoliation performance of various graphite types (e.g., natural crystalline flake, natural vein, and synthetic) from around the globe (e.g., Alaska, Tanzania, China, etc.). We first established a normalization method for the facile comparison of FLG (Φ) yields between separately exfoliated graphites. Using this approach, we find that the relative yield of FLG ranges from 0% to 22% across graphite types, with regular natural crystalline flakes (NCF-R) performing the best overall (Φ NCF-R = 16% ± 5%). FLG yield was also found to depend on source geography, evidenced by Φ NCF-R ranging from 8% to 22% for NCF-R sourced from Alabama and Canada, respectively. We employed machine learning and Pearson correlation analysis to determine the graphite characteristics that govern FLG yield. Graphite source-dependent properties such as graphite surface area and mineral impurities, including aluminum and calcium, were found to be critically important. Our findings highlight the importance of the graphite source when trying to maximize the yield of mechanically exfoliated FLG and represent an important step toward producing higher quantities of defect-free FLG for graphene-based research.

42 ENGINEERING↗
DOE OSTI2022

Machine learning reveals key ion selectivity mechanisms in polymeric membranes with subnanometer pores

Designing single-species selective membranes for high-precision separations requires a fundamental understanding of the molecular interactions governing solute transport. Here, we comprehensively assess molecular-level features that influence the separation of 18 different anions by nanoporous cellulose acetate membranes. Our analysis identifies the limitations of bulk solvation characteristics to explain ion transport, highlighted by the poor correlation between hydration energy and the measured permselectivity (R 2 = 0.37). Entropy-enthalpy compensation, spanning 40 kilojoules per mole, leads to a free-energy barrier (ΔG‡) variation of only ~8 kilojoules per mole across all anions. We apply machine learning to elucidate descriptors for energetic barriers from a set of 126 collected features. Notably, electrostatic features account for 75% of the overall features used to describe ΔG‡, despite the relatively uncharged state of cellulose acetate. Our work presents an approach for studying ion transport across nanoporous membranes that could enable the design of ion-selective membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ionization behavior of nanoporous polyamide membranes

Escalating global water scarcity necessitates high-performance desalination membranes, for which fundamental understanding of structure–property–performance relationships is required. In this study, we comprehensively assess the ionization behavior of nanoporous polyamide selective layers in state-of-the-art nanofiltration (NF) membranes. In these films, residual carboxylic acids and amines influence permeability and selectivity by imparting hydrophilicity and ionizable moieties that can exclude coions. We utilize layered interfacial polymerization to prepare physically and chemically similar selective layers of controlled thickness. Additionally, we then demonstrate location-dependent ionization of carboxyl groups in NF polyamide films. Specifically, only surface carboxyl groups ionize under neutral pH, whereas interior carboxyl ionization requires pH >9. Conversely, amine ionization behaves invariably across the film. First-principles simulations reveal that the low permittivity of nanoconfined water drives the anomalous carboxyl ionization behavior. Furthermore, we report that interior carboxyl ionization could improve the water–salt permselectivity of NF membranes over fourfold, suggesting that interior charge density could be an important tool to enhance the selectivity of polyamide membranes. Our findings highlight the influence of nanoconfinement on membrane transport properties and provide enhanced fundamental understanding of ionization that could enable novel membrane design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Towards single-species selectivity of membranes with subnanometre pores

Synthetic membranes with pores at the subnanometre scale are at the core of processes for separating solutes from water, such as water purification and desalination. While these membrane processes have achieved substantial industrial success, the capability of state-of-the-art membranes to selectively separate a single solute from a mixture of solutes is limited. Such high-precision separation would enable fit-for-purpose treatment, improving the sustainability of current water-treatment processes and opening doors for new applications of membrane technologies. In this paper, we introduce the challenges of state-of-the-art membranes with subnanometre pores to achieve high selectivity between solutes. Here, we then analyse experimental and theoretical literature to discuss the molecular-level mechanisms that contribute to energy barriers for solute transport through subnanometre pores. We conclude by providing principles and guidelines for designing next-generation single-species selective membranes that are inspired by ion-selective biological channels.

42 ENGINEERING↗