Search NASA⌕ Search

Engineering topics

Roberts, A. Sidney, Jr.

Publications and source records attributed to Roberts, A. Sidney, Jr..

New devices for flow measurements: Hot film and burial wire sensors, infrared imagery, liquid crystal, and piezo-electric model

An experimental program aimed at identifying areas in low speed aerodynamic research where infrared imaging systems can make significant contributions is discussed. Implementing a new technique, a long electrically heated wire was placed across a laminar flow. By measuring the temperature distribution along the wire with the IR imaging camera, the flow behavior was identified.

Mcree, Griffith J., Jr.↗

Convective response of a wall-mounted hot-film sensor in a shock tube

Shock tube experiments were performed in order to determine the response of a single hot-film element of a sensor array to transiently induced flow behind weak normal shock waves. The experiments attempt to isolate the response due only to the change in convective heat transfer at the hot-film surface mounted on the wall of the shock tube. The experiments are described, the results being correlated with transient boundary layer theory and compared with an independent set of experimental results. One of the findings indicates that the change in the air properties (temperature and pressure) precedes the air mass transport, causing an ambiguity in the sensor response to the development of the velocity boundary layer. Also, a transient, local heat transfer coefficient is formulated to be used as a forcing function in an hot-film instrument model and simulation which remains under investigation.

Roberts, A. Sidney, Jr.↗

Twenty-five years of aerodynamic research with IR imaging: A survey

Infrared imaging used in aerodynamic research evolved during the last 25 years into a rewarding experimental technique for investigation of body-flow viscous interactions, such as heat flux determination and boundary layer transition. The technique of infrared imaging matched well its capability to produce useful results, with the expansion of testing conditions in the entire spectrum of wind tunnels, from hypersonic high-enthalpy facilities to cryogenic transonic wind tunnels. With unique achievements credited to its past, the current trend suggests a change in attitude towards this technique: from the perception as an exotic, project-oriented tool, to the status of a routine experimental procedure.

Gartenberg, Ehud↗

Infrared imaging and tufts studies of boundary layer flow regimes on a NACA 0012 airfoil

A study of boundary-layer flow regimes on a NACA 0012 airfoil from zero angle of attack up to separation is presented. The boundary-layer transition from the laminar to the turbulent regime and the onset of the separation were detected by surface thermography of the airfoil performed with an infrared imaging system. The findings were compared with observations of aluminum-foil tufts visible with the infrared imaging system. This arrangement allows the infrared imaging system to assume the dual role of flow regime detection through surface thermography and flow visualization through the observation of the aluminum-foil tufts. Ultimately the temperature history on an uncontaminated surface could provide an interpretation of the state of boundary-layer flow. Separation studies performed on the NACA 0012 airfoil showed that aluminum foil tufts can be observed with infrared imaging systems.

Gartenberg, Ehud↗

Phenomenological aspects of infrared imaging in aeronautical research

The various factors leading to obtaining a thermography of an aerodynamic body of interest using an infrared imaging camera are scrutinized. Included is a description of how the various heat transfer mechanisms determine the final surface temperature that may be time dependent even for steady state flows. Some constraining factors of the camera are also discussed. Finally, a method is outlined showing how the infrared imaging of aerodynamic configurations may ultimately evolve as a computational fluid dynamics code validation tool.

Gartenberg, Ehud↗

Aerodynamic investigation by infrared imaging

Infrared imaging systems can be used to measure temperatures of actively heated bodies immersed in an airstream. This monitoring of the convective heat transfer process, provides also information about the interaction between the body and the flow. The concept appeals to Nusselt/Reynolds numbers relations in order to produce data of interest from surface temperatures. Two test cases are presented and reference is made to analytical results: the mapping of a laminar jet and the temperature distribution along a constant power heated flat plate in laminar boundary layer regime. Although this research is currently focused on low speed aerodynamics, the extension to high speed aerodynamics, where the body undergoes frictional heating is of interest in this context, too.

Roberts, A. Sidney, Jr.↗

Infrared surface imaging as a flowfield diagnostic tool

An infrared imaging system supported by a dedicated image processing system was evaluated as a diagnostic tool for aerodynamic research. Results are reported characterizing the system's capability for performing a variety of experimental investigations, such as temperature transients, air velocity distributions, capture of vortices, boundary layer flows, and separated flows over a flat plate with a two-dimensional rearward-facing step.

Gartenberg, Ehud↗