Engineering topics

Rogers, Alexander

Publications and source records attributed to Rogers, Alexander.

3 records

DOE OSTI2023

The effect of powder feedstock and heat treatment on the thermal and mechanical properties of binder jet printed ZrC

In this study, zirconium carbide (ZrC) disks were fabricated using binder jet printing to study the effect of powder feedstock, print parameters, and heat treatment on flowability and final materials properties. A median volumetric particle size smaller than 10 μm was shown to cause the powder to stop flowing during printing. Disks were printed using ZrC with suitable flowability and then heat-treated at temperatures between 1800°C and 2200°C for 1 or 5h. The density, part shrinkage, thermal diffusivity, and fracture strength all increased with increasing temperature and time. The heat-treated disks were then heated to 2200°C for 5h and the properties converged for disks of the same particle size, indicating the hottest temperature and longest time of exposure dictates the final properties. Lastly, it was shown that larger particles produce lower density materials with worse thermal diffusivity, most likely because of poor connectivity between particles after heat treatment.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Probing Clustering Dynamics between Silicon and PAA or LiPAA Slurries under Processing Conditions

This work explores the complex interplay between slurry aggregation, agglomeration, and conformation (i.e., shape) of poly(acrylic acid) (PAA)- and lithiated PAA-based silicon slurries as a function of the shear rate and the resulting slurry homogeneity. These values were measured by small-angle neutron scattering (SANS) and rheology-coupled ultra-SANS at conditions relevant to battery electrode casting. Different binder solution preparation methods, either a ball milling (BM) process or a planetary centrifugal mixing (PCM) process, dramatically modify the resulting polymer dynamics and organization around a silicon material. This is due to the different energy profiles of mixing where the more violent and higher energy PCM causes extensive breakdown and reformation of the binder, which is now likely in a branched conformation, while the lower energy BM results in simply lower-molecular weight linear polymers. In conclusion, the breakdown and reorganization of the polymer structure affect silicon slurry homogeneity, which affects subsequent electrode architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Understanding Binder–Silicon Interactions during Slurry Processing

The conformation of poly(acrylic acid) (PAA) as a function of shear during slurry processing to construct silicon-based anodes is elucidated via rheology-coupled ultra-small-angle neutron scattering (rheo-USANS). Rheo-USANS shows that PAA with encapsulated silicon exists as discrete aggregates that do not interact with one another. As a result, a well-connected matrix of silicon and carbon black dispersed in PAA does not exist; thus, the electrode is inhomogeneous. Raman mapping and X-ray photoelectron spectroscopy were used to confirm the electrode heterogeneity and further understand the cycling properties. These results are correlated to silicon surface chemistry to provide a pathway to making better electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗