Engineering topics

Rogers, Melissa J. B.

Publications and source records attributed to Rogers, Melissa J. B..

36 records · Page 2

NASA NTRS1995

USML-1 microgravity glovebox experiment no. 1 Passive Accelerometer System

The passive accelerometer system (PAS) is a simple moving ball accelerometer capable of measuring the small magnitude steady relative acceleration that occurs in a low earth orbit spacecraft due to atmospheric drag and the earth's gravity gradient. The accelerometer can be used when the spacecraft continuously rotates during the orbit such that some line of reference in the craft always points along the vector connecting the earth's mass center with the spacecraft mass center. PAS was used successfully on the first United States Microgravity Laboratory (USML-1).

Alexander, J. Iwan D.↗

NASA NTRS1994

Summary report of mission acceleration measurements for STS-60, SPACEHAB2, launched 11 February 1994

The STS-60 mission, which launched on 11 February 1994, carried seven accelerometer systems. This report describes the configuration of each of these systems, where they were located on the Orbiter and the name of a contact person for each system. The Space Acceleration Measurement System (SAMS) was one of the accelerometer systems on-board and this mission marked its eighth successful flight. Acceleration data are provided here for SAMS which flew under an agreement between the NASA Microgravity Science and Applications division and the NASA office of Advanced Concepts and Technology. Acceleration data for the other accelerometer systems are not presented here. SAMS was located in the commercial SPACEHAB laboratory, on its second flight. The SAMS system was configured with three triaxial sensor heads with filter cut-offs of 5, 10, and 50 Hz. The acceleration environment related to an experiment centrifuge, an experiment refrigerator freezer unit, a SAMS sensor head rotation, an Orbiter shudder, and payload deploy activities are discussed. In the Appendices, all of the data from SAMS Head B (10 Hz) are plotted to provide an overview of the environment during the majority of the STS-60 mission. An evaluation form is included at the end of the report to solicit users' comments about the usefulness of this series of reports.

Rogers, Melissa J. B.↗

NASA NTRS1994

Summary Report of Mission Acceleration Measurements for STS-62, Launched 4 March 1994

The second mission of the United States Microgravity Payload on-board the STS-62 mission was supported with three accelerometer instruments: the Orbital Acceleration Research Experiment (OARE) and two units of the Space Acceleration Measurements System (SAMS). The March 4, 1994 launch was the fourth successful mission for OARE and the ninth successful mission for SAMS. The OARE instrument utilizes a sensor for very low frequency measurements below one Hertz. The accelerations in this frequency range are typically referred to as quasisteady accelerations. One of the SAMS units had two remote triaxial sensor heads mounted on the forward MPESS structure between two furnance experiments, MEPHISTO and AADSF. These triaxial heads had low-pass filter cut-off frequencies at 10 and 25 Hz. The other SAMS unit utilized three remote triaxial sensor heads. Two of the sensor heads were mounted on the aft MPESS structure between the two experiments IDGE and ZENO. These triaxial heads had low-pass filter cut-off frequencies at 10 and 25 Hz. The third sensor head was mounted on the thermostat housing inside the IDGE experiment container. This triaxial head had a low-pass filter cut-off frequency at 5 Hz. This report is prepared to furnish interested experiment investigators with a guide to evaluating the acceleration environment during STS-62 and as a means of identifying areas which require further study. To achieve this purpose, various pieces of information are included, such as an overview of the STS-62 mission, a description of the accelerometer system flown on STS-62, some specific analysis of the accelerometer data in relation to the various mission activities, and an overview of the low-gravity environment during the entire mission. An evaluation form is included at the end of the report to solicit users' comments about the usefulness of this series of reports.

Rogers, Melissa J. B.↗

NASA NTRS1993

Acceleration Studies

Work to support the NASA MSFC Acceleration Characterization and Analysis Project (ACAP) was performed. Four tasks (analysis development, analysis research, analysis documentation, and acceleration analysis) were addressed by parallel projects. Work concentrated on preparation for and implementation of near real-time SAMS data analysis during the USMP-1 mission. User support documents and case specific software documentation and tutorials were developed. Information and results were presented to microgravity users. ACAP computer facilities need to be fully implemented and networked, data resources must be cataloged and accessible, future microgravity missions must be coordinated, and continued Orbiter characterization is necessary.

Rogers, Melissa J. B.↗

NASA NTRS1993

DADiSP processing guide

A guide for DADiSP software, intended for use by the Lambda Point Experiment (LPE) Team during and after the United States Microgravity Payload (USMP)-1 mission, is presented. DADiSP is a Data Analysis and Display Software developed and marketed by DSP Development Corporation, Cambridge, Massachusetts. This guide is intended to be used in addition to the DADiSP Worksheet User Manual and Reference Manual which are supplied by the company with the software. Technical support for DADiSP is available from DSP at (617) 577-1133. Access to DADiSP on Acceleration Characterization and Analysis Project (ACAP) EGSE is being provided to the LPE team during USMP-1 for off-line processing of SAMS data.

Rogers, Melissa J. B.↗

NASA NTRS1993

A comparison of low-gravity measurements on-board Columbia during STS-40

The first NASA Spacelab Life Sciences mission (SLS-1) flew 5 Jun. to 14 Jun. 1991 on the orbiter Columbia (STS-40). The purpose of the mission was to investigate the human body's adaptation to the low-gravity conditions of space flight and the body's readjustment after the mission to the 1 g environment of earth. In addition to the life sciences experiments manifested for the Spacelab module, a variety of experiments in other scientific disciplines flew in the Spacelab and in Get Away Special (GAS) Canisters on the GAS Bridge Assembly. Several principal investigators designed and flew specialized accelerometer systems to better assess the results of their experiments by means of a low-gravity environment characterization. This was also the first flight of the NASA Microgravity Science and Applications Division (MSAD) sponsored Space Acceleration Measurement System (SAMS) and the first flight of the NASA Orbiter Experiments Office (OEX) sponsored Orbital Acceleration Research Experiment accelerometer (OARE). A brief introduction to seven STS-40 accelerometer systems are presented and the resulting data are discussed and compared. During crew sleep periods, acceleration magnitudes in the 10(exp -6) to 10(exp -5) g range were recorded in the Spacelab module and on the GAS Bridge Assembly. Magnitudes increased to the 10(exp -4) g level during periods of nominal crew activity. Vernier thruster firings caused acceleration shifts on the order of 10(exp -4) g and primary thruster firings caused accelerations as great as 10(exp -2) g. Frequency domain analysis revealed typical excitation of Orbiter and Spacelab structural modes at 3.5, 4.7, 5.2, 6.2, 7, and 17 Hz.

Rogers, Melissa J. B.↗

NASA NTRS1993

Detailed analysis of Honeywell In-Space Accelerometer data - STS-32

The Honeywell In-Space Accelerometer (HISA) system collected data in the mid-deck area of the Shuttle Columbia during the flight of STS-32, January 1990. The resulting data were to be used to investigate the response of crystal microstructure to different types of residual acceleration. The HISA is designed to detect and record transient and oscillatory accelerations. The sampling and electronics package stored averaged accelerations over two sampling periods; two sampling rates were available: 1 Hz and 50 Hz. Analysis of the HISA data followed the CMMR Acceleration Data Processing Guide, considering in-house computer modelling of a float-zone indium crystal growth experiment. Characteristic examples of HISA data showing the response to the primary reaction control system, Orbiter Maneuvering System operations, and crew treadmill activity are presented. Various orbiter structural modes are excited by these and other activities.

Rogers, Melissa J. B.↗

NASA NTRS1993

Residual acceleration data on IML-1: Development of a data reduction and dissemination plan

The research performed consisted of three stages: (1) identification of sensitive IML-1 experiments and sensitivity ranges by order of magnitude estimates, numerical modeling, and investigator input; (2) research and development towards reduction, supplementation, and dissemination of residual acceleration data; and (3) implementation of the plan on existing acceleration databases.

Rogers, Melissa J. B.↗

NASA NTRS1992

Residual acceleration data on IML-1: Development of a data reduction and dissemination plan

The need to record some measure of the low-gravity environment of an orbiting space vehicle was recognized at an early stage of the U.S. Space Program. Such information was considered important for both the assessment of an astronaut's physical condition during and after space missions and the analysis of the fluid physics, materials processing, and biological sciences experiments run in space. Various measurement systems were developed and flown on space platforms beginning in the early 1970's. Similar in concept to land based seismometers that measure vibrations caused by earthquakes and explosions, accelerometers mounted on orbiting space vehicles measure vibrations in and of the vehicle due to internal and external sources, as well as vibrations in a sensor's relative acceleration with respect to the vehicle to which it is attached. The data collected over the years have helped to alter the perception of gravity on-board a space vehicle from the public's early concept of zero-gravity to the science community's evolution of thought from microgravity to milligravity to g-jitter or vibrational environment. Since the advent of the Shuttle Orbiter Program, especially since the start of Spacelab flights dedicated to scientific investigations, the interest in measuring the low-gravity environment in which experiments are run has increased. This interest led to the development and flight of numerous accelerometer systems dedicated to specific experiments. It also prompted the development of the NASA MSAD-sponsored Space Acceleration Measurement System (SAMS). The first SAMS units flew in the Spacelab on STS-40 in June 1991 in support of the first Spacelab Life Sciences mission (SLS-1). SAMS is currently manifested to fly on all future Spacelab missions.

Rogers, Melissa J. B.↗

NASA NTRS1992

Development of a residual acceleration data reduction and dissemination plan

A major obstacle in evaluating the residual acceleration environment in an orbiting space laboratory is the amount of data collected during a given mission: gigabytes of data will be available as SAMS units begin to fly regularly. Investigators taking advantage of the reduced gravity conditions of space should not be overwhelmed by the accelerometer data which describe these conditions. We are therefore developing a data reduction and analysis plan that will allow principal investigators of low-g experiments to create experiment-specific residual acceleration data bases for post-flight analysis. The basic aspects of the plan can also be used to characterize the acceleration environment of earth orbiting laboratories. Our development of the reduction plan is based on the following program of research: the identification of experiment sensitivities by order of magnitude estimates and numerical modelling; evaluation of various signal processing techniques appropriate for the reduction, supplementation, and dissemination of residual acceleration data; and testing and implementation of the plan on existing acceleration data bases. The orientation of the residual acceleration vector with respect to some set of coordinate axes is important for experiments with known directional sensitivity. Orientation information can be obtained from the evaluation of direction cosines. Fourier analysis is commonly used to transform time history data into the frequency domain. Common spectral representations are the amplitude spectrum which gives the average of the components of the time series at each frequency and the power spectral density which indicates the power or energy present in the series per unit frequency interval. The data reduction and analysis scheme developed involves a two tiered structure to: (1) identify experiment characteristics and mission events that can be used to limit the amount of accelerator data an investigator should be interested in; and (2) process the data in a way that will be meaningful to the experiment objectives. A general outline of the plan is given.

Rogers, Melissa J. B.↗

NASA NTRS1992

Residual acceleration data analysis for Spacelab missions

A two-level reduction plan is developed analytically with references to existing experimental data that can be used to develop accelerometer databases for postflight experiment analyses. Residual-acceleration data from previous experiments are studied with attention given to the differences in magnitude among the databases. First-level processing is based on the identification of instances in which tolerable acceleration levels are exceeded so that the time intervals requiring further scrutiny are found. Acceleration time histories including magnitude and orientation are utilized with frequency data for the second level of processing, and the data required for a given time window are reduced by means of data decimation. The identification and processing of limited windows of acceleration data facilitates the characterization of the acceleration environment. These characterizations are of use in the design, location, and utilization of low-gravity laboratory equipment.

Rogers, Melissa J. B.↗

NASA NTRS1992

Residual acceleration data on IML-1: Development of a data reduction and dissemination plan

The main thrust of our work in the third year of contract NAG8-759 was the development and analysis of various data processing techniques that may be applicable to residual acceleration data. Our goal is the development of a data processing guide that low gravity principal investigators can use to assess their need for accelerometer data and then formulate an acceleration data analysis strategy. The work focused on the flight of the first International Microgravity Laboratory (IML-1) mission. We are also developing a data base management system to handle large quantities of residual acceleration data. This type of system should be an integral tool in the detailed analysis of accelerometer data. The system will manage a large graphics data base in the support of supervised and unsupervised pattern recognition. The goal of the pattern recognition phase is to identify specific classes of accelerations so that these classes can be easily recognized in any data base. The data base management system is being tested on the Spacelab 3 (SL3) residual acceleration data.

Rogers, Melissa J. B.↗

NASA NTRS1992

Experiment specific processing of residual acceleration data

To date, most Spacelab residual acceleration data collection projects have resulted in data bases that are overwhelming to the investigator of low-gravity experiments. This paper introduces a simple passive accelerometer system to measure low-frequency accelerations. Model responses for experiments using actual acceleration data are produced and correlations are made between experiment response and the accelerometer time history in order to test the idea that recorded acceleration data and experimental responses can be usefully correlated. Spacelab 3 accelerometer data are used as input to a variety of experiment models, and sensitivity limits are obtained for particular experiment classes. The modeling results are being used to create experiment-specific residual acceleration data processing schemes for interested investigators.

Rogers, Melissa J. B.↗

NASA NTRS1991

Analysis of Spacelab 3 residual acceleration data

A data reduction plan is being developed to efficiently process residual acceleration data, making such data more accessible to principal investigators of low-gravity experiments. Accelerometer data collected during the Spacelab 3 mission is being processed using a prototype version of this plan. The plan addresses various aspects of acceleration data analysis: the identification of disturbances that are intolerable to experiments, the investigation of acceleration orientations, the definition and characterization of the background acceleration corresponding to a given experiment time line, the isolation and examination of particular significant disturbances, and the identification of disturbance sources. Acceleration magnitude, frequency, and orientation are discussed: transient accelerations can have magnitudes as large as 0.01 g with frequency components no greater than 0.001 g. These accelerations fluctuate rapidly in orientation. The occurrence of disturbance sources in an orbiter is tentatively identified as a random process, whereas the response of the orbiter to given accelerations is considered deterministic. The need to continue monitoring of residual accelerations in orbiting space laboratories is stressed.

Rogers, Melissa J. B.↗

NASA NTRS1991

Residual acceleration data on IML-1: Development of a data reduction and dissemination plan

A residual acceleration data analysis plan is developed that will allow principal investigators of low-gravity experiments to efficiently process their experimental results in conjunction with accelerometer data. The basic approach consisted of the following program of research: (1) identification of sensitive experiments and sensitivity ranges by order of magnitude estimates, numerical modelling, and investigator input; (2) research and development towards reduction, supplementation, and dissemination of residual acceleration data; and (3) implementation of the plan on existing acceleration data bases.

Rogers, Melissa J. B.↗

NASA NTRS1991

Cross-correlation analysis of on-orbit residual accelerations in Spacelab

To characterize the low-gravity environment within orbiting space laboratories, researchers are operating sensitive accelerometer systems. Transient accelerations recorded in spacecraft can have magnitudes up to 0.01 g over a wide range of frequencies. These accelerations have components in the 0.001-100-Hz range no greater in magnitude than 0.001 g. Some experiments can be sensitive to such accelerations, so investigators are interested in identifying causal relationships between accelerations and experimental results. Here, two forms of synthetic experiment data created using Spacelab 3 accelerometer data are evaluated using cross-correlation analysis. The results show that the use of cross-correlation techniques is appropriate, for specific experiment classes, for assessing relationships between both transient and oscillatory residual accelerations and experimental results recorded in a low-gravity environment.

Rogers, Melissa J. B.↗

NASA NTRS1991

A strategy for residual acceleration data reduction and dissemination

A data reduction plan is being developed to efficiently process residual acceleration data from orbiting space laboratories. Implementation of the reduction plan will result in a useful, manageable accelerometer data base which can be readily employed by principal investigators during post-flight analysis of experimental results. The data reduction plan will also assist in the characterization of the acceleration environment of orbiters, which is important for the planning of future experimental missions. Prototype versions of the reduction plan are being tested using accelerometer data recorded during the Spacelab 3 (SL3) mission. Transient disturbances caused by shuttle and experiment operations and crew activities are being cataloged. The magnitudes of such disturbances can be as much as 0.01 g, but are rarely sustained for more than a fraction of a second and tend to vary greatly in orientation. It is found that the recorded frequency components of the SL3 disturbances do not exceed tolerance limits determined from modeling for a selected experiment set.

Rogers, Melissa J. B.↗

NASA NTRS1990

Analysis techniques for residual acceleration data

Various aspects of residual acceleration data are of interest to low-gravity experimenters. Maximum and mean values and various other statistics can be obtained from data as collected in the time domain. Additional information may be obtained through manipulation of the data. Fourier analysis is discussed as a means of obtaining information about dominant frequency components of a given data window. Transformation of data into different coordinate axes is useful in the analysis of experiments with different orientations and can be achieved by the use of a transformation matrix. Application of such analysis techniques to residual acceleration data provides additional information than what is provided in a time history and increases the effectiveness of post-flight analysis of low-gravity experiments.

Rogers, Melissa J. B.↗