Engineering topics

Rom, J.

Publications and source records attributed to Rom, J..

6 records

NASA NTRS1995

Hypersonic aerodynamics test facility using the external propulsion accelerator

The use of the External propulsion Accelerator (EPA) for launching models of hypersonic aerodynamic configurations into an instrumented ballistic range is discussed. The aerodynamic model is encased inside an axisymmetric projectile designed to be accelerated to high speed in the EPA. Accelerator lengths required to achieve hypersonic speeds are estimated to vary from 10 meters for Mach 7, 40 meters for Mach 10, 150 meters for Mach 15, and 700 meters for Mach 30, assuming a limit of 50,000 g's acceleration. For a model span of 10 cm to 25 cm, the launch tube diameters are 40 cm and 100 cm, respectively. Using this EPA launcher will enable exact simulation of hypersonic flight in ground facilities where both the gas composition and pressure can be controlled in the ballistic range.

Rom, J.↗

NASA NTRS1983

Calculation of symmetric vortex separation affecting subsonic bodies at high incidence

A method for calculating the longitudinal aerodynamic coefficients and the pressure distributions on a body at reasonably high angles of attack is presented. The body is represented by a combination of source elements and vortex-lattice elements, including separation of the vortices at increasing angles of attack. The method is self-consistent in that the body and the separated vortex wake are treated as an integrated interacting system. The location of the separation line can be included as an arbitrary input from experimental data or can be evaluated approximately by a pressure-dependent criterion. Calculated values of the aerodynamic coefficients and pressure distributions on cone-cylinder and ogive-cylinder bodies compare well, qualitatively and quantitatively, with experimental data, including simulation of the dependence on Reynolds number.

Almosnino, D.↗

NASA NTRS1981

Interactive method for computation of viscous flow with recirculation

An interactive method is proposed for the solution of two-dimensional, laminar flow fields with identifiable regions of recirculation, such as the shear-layer-driven cavity flow. The method treats the flow field as composed of two regions, with an appropriate mathematical model adopted for each region. The shear layer is computed by the compressible boundary layer equations, and the slowly recirculating flow by the incompressible Navier-Stokes equations. The flow field is solved iteratively by matching the local solutions in the two regions. For this purpose a new matching method utilizing an overlap between the two computational regions is developed, and shown to be most satisfactory. Matching of the two velocity components, as well as the change in velocity with respect to depth is amply accomplished using the present approach, and the stagnation points corresponding to separation and reattachment of the dividing streamline are computed as part of the interactive solution. The interactive method is applied to the test problem of a shear layer driven cavity. The computational results are used to show the validity and applicability of the present approach.

Brandeis, J.↗

NASA NTRS1980

Three-layer interactive method for computing supersonic laminar separated flows

An interactive model for numerical computation of complicated two-dimensional flowfields including regions of reversed flow is proposed. The present approach is one of dividing the flowfield into three regions, in each of which a simplified mathematical model is applied: (1) outer, supersonic flow for which the full potential equation (hyperbolic) is used; (2) viscous, laminar layer in which the compressible boundary-layer model (parabolic) is used; and (3) recirculating flow modeled by the incompressible Navier-Stokes equations (elliptic). For matching of the numerical solutions in the three layers, two interaction models are developed: one for pressure interaction, the other for interaction between the shear layer and the recirculating flow. The uniform solution for the whole flowfield is then obtained by iteration of the local solutions under the constraints imposed by matching. The three-layer interactive model is used for solution of the flowfield past an asymmetric cavity. The method is shown to be capable of dealing with backflow without encountering problems at separation, characteristic to the boundary-layer approach.

Brandeis, J.↗

NASA NTRS1976

Laminar supersonic flow over a backstep - A numerical solution at higher Reynolds numbers

The Allen-Cheng solution of the flow over a backward facing step is extended to Reynolds numbers up to 16,000 and to inflow boundary-layer height ratios as low as 0.1 by moving the downstream boundary into the recompression region and by smoothing the resulting errors. The boundary conditions in the supersonic outer flow and the downstream boundary conditions in the wake are determined by an extrapolation procedure. Computational results are compared with relevant experimental data. Fair agreement is found between the calculated base pressures and the experimental values, whereas agreement between heat transfer rates appears to be qualitative only.

Kronzon, Y.↗

NASA NTRS1974

Calculations of the pressure distribution on axisymmetric boattails including effects of viscous interactions and exhaust jets in subsonic flow

A method of calculating the pressure distributions on boattails is proposed. This method accounts for viscous effects including the presence of a separated region for base flows by combining an inviscid analysis with a boundary layer analysis in an iterative calculation. Details of the reversed flow region are not considered. Some preliminary results have been obtained for boattails at subsonic free stream Mach number with turbulent boundary layers separating at the boattail base. In some cases convergence could not be obtained using the present computer program. It is possible, in principle, to extend this method to the calculation of boattail flows with pressure gradient induced separation on the boattail.

Rom, J.↗