Interchangeable Use of GNSS and Seismic Data for Rapid Earthquake Characterization: 2021 Chignik Earthquake, Alaska
Earthquake magnitude estimation using peak ground velocities (PGV) derived from 13 Global Navigation Satellite Systems (GNSS) data has shown promise for rapid 14 characterization of damaging earthquakes. Here we examine the feasibility of using 15 GNSS-derived velocity waveforms as interchangeable data for ground motion estimation 16 and other products that typically rely on strong-motion seismic records. Our study 17 compares PGVs derived from high-rate GNSS to those computed from high-rate seismic 18 records (strong-motion and velocity), at co- and closely-located stations. The recent 2021 Manuscript Click here to access/download;Manuscript;Manuscript_Final.docx 2 19 Mw 8.2 Chignik earthquake in Alaska that was recorded on co-located GNSS and strong20 motion sensors provides the perfect opportunity to compare the two data streams and 21 their application in rapid response. The Chignik velocity records appear almost identical 22 at co-located GNSS and strong-motion stations when observed at frequencies < 0.25 Hz. 23 GNSS and strong-motion derived velocity data are further employed to generate rapid 24 estimates of PGV-derived moment magnitudes for the earthquake. The moment 25 magnitude estimates from GNSS and joint GNSS/seismic data are within ~ ±0.4 26 magnitude units (Fang et al., 2020) of the final magnitude (Mw 8.2). ShakeMaps 27 generated for the 2021 Chignik earthquake using GNSS and seismic PGVs show notable 28 agreement between them, and show negligible shifts in PGV contours when co-/closely 29 located GNSS and seismic stations are substituted for one another. Therefore, we posit 30 that GNSS is a powerful alternative or addition to seismic data and vice versa.