Search NASA⌕ Search

Engineering topics

Roschli, Alex C.

Publications and source records attributed to Roschli, Alex C..

At least 19 records

Continuous toolpaths for additive manufacturing

Toolpath generation for additive manufacturing systems involves operations on polygonal contours derived from a model for additively manufacturing a structure. One aspect involves modifying or creating a model to allow parts to be printed without starting and stopping the printing equipment by generating continuous toolpaths or toolpaths having a reduced number of isolated paths. Another aspect involves modifying a slicing engine to generate a continuous toolpath or toolpath having a reduced number of isolated paths based on a representation of an object to be additively manufactured. Another aspect involves selectively placing the gaps at alternating positions among the sliced layers to create a zippering effect.

Borish, Michael C.↗

System and method for additive manufacturing with toolpath bridges and resultant structure

A system and method for improving additive manufacturing, including additive manufacturing toolpaths, is provided. The system and method includes a toolpath generator that obtains initial toolpaths of an object, identifies isolated paths in the toolpaths, and adds bridge connections between neighboring isolated paths in each layer to improve the toolpaths. The bridge connections facilitate the continuous and non-stop deposition of each layer according to improved toolpaths during additive manufacture, which can reduce total deposition time and improve the resultant additive manufacture.

Kim, Seokpum↗

Cable-driven additive manufacturing system

A cable-driven additive manufacturing system includes an end effector configured for linear translation within a three-dimensional workspace, an aerial hoist suspending the end effector by at least one suspension cable, a plurality of base stations disposed below the aerial hoist, and control cables running from each of the base stations to the end effector.

Post, Brian K.↗

Polymer exhaust for eliminating extruder transients

An additive manufacturing method that includes an extruder providing a supply of working material and a nozzle connected with respect to the extruder, the nozzle directing the working material to a deposit surface. A diverter valve is positioned between the extruder and the nozzle to direct the working material to an exhaust port away from the deposit surface under certain conditions.

Chesser, Phillip C.↗

Utility of Big Area Additive Manufacturing for Part Production for Low-Head Hydropower (CRADA NFE-18-07280 Final Report)

ORNL worked with Cadens, LLC, to explore the use of additive manufacturing (AM) to produce low-cost parts for low-head hydropower systems. Cadens develops design optimization software that leverages the flexible, low-cost, high-strength benefits of AM and composite materials. Cadens also operates a micro-hydro lab to test AM components in controlled environments. Until now, Cadens’ tests have been limited to components of a size that they can cost-effectively manufacture using local commercial systems. This project provided an opportunity for Cadens to scale up their modular AM hydropower parts using the capabilities of Big Area Additive Manufacturing (BAAM). This project was a success and resulted in the design and fabrication of several end-use parts of a hydropower system, using a Big Area Additive Manufacturing (BAAM) system. The fabricated parts include a draft tube, thimble, runner housing mold, PVC end fitting and two PVC pipe supports. In addition, a runner system was fabricated using fused deposition modeling on a 3D Platform Workbench 400 Series System.

13 HYDRO ENERGY↗

Method for generating and dispensing a powdered release agent

A method for generating and dispensing a powdered release agent during an additive manufacturing build is disclosed. A solid body of release agent material is ground insitu by a grinder and dispensed on a surface of the part to prevent adhesion of an adjacent layer of a base material. With the addition of the powdered release agent, a support structure is easily separated from the base material when the part is complete, saving time and preventing the part from sustaining unintentional damage. Since no powdered release agent is actually loaded or stored in the apparatus, the potential for spillage, waste, inconsistent dispensing, inadvertent dispensing, and clumping due to humidity is eliminated.

42 ENGINEERING↗

Commercialization of Big Area Additive Manufacturing (CRADA NFE-16-06083 Final Report)

Oak Ridge National Laboratory (ORNL) first partnered with Cincinnati Incorporated (CI) through a Cooperative Research and Development Agreement (CRADA) (NFE-14-04957) in 2014 to demonstrate the feasibility and viability of Big Area Additive Manufacturing (BAAM). The first CRADA was a success and paved the way for large format additive manufacturing (LFAM). ORNL and CI partnered again for this second CRADA (NFE-16-06083) to improve process control, enhance printing capabilities, and shift towards production capability.

42 ENGINEERING↗

Large-Scale Additive Manufacturing for Low Cost Small-Scale Wind Turbine Manufacturing (CRADA NFE-18-07065)

Oak Ridge National Laboratory’s (ORNL) Manufacturing Demonstration Facility (MDF) worked with XZERES Wind to fabricate small (in comparison to traditional wind energy systems) wind turbine blades using large-scale polymer additive manufacturing (AM) in Phase 1 of this project. The results of Phase 1 showed promise for the use of AM in the production of small wind energy systems. Although, the large-scale polymer AM systems available for this project proved to be too large for this application, ORNL and XZERES Wind were able to prove that AM is a viable opportunity to improve small wind turbine blades. The goal for Phase 2 was for XZERES to design tooling for their existing blade geometry and for ORNL to manufacture the tooling and a blade section using advanced manufacturing techniques. Unfortunately, due to personnel turnover at XZERES, Phase 2 was not completed.

17 WIND ENERGY↗

Big Area Additive Manufacturing Engineering Development, Process Trials, and Composite Core Fabrication (CRADA NFE-17-06827 Final Report)

Oak Ridge National Laboratory (ORNL) has worked with Raytheon to develop and test the materials necessary to produce a moderately sized boat using Big Area Additive Manufacturing (BAAM). This Phase 2 project focused on printing and testing the components of the boat designed by Raytheon. This involved collaborating on boat design, printing the boat, testing surface coatings, and assembling the boat.

36 MATERIALS SCIENCE↗

Feasibility of Using BAAM for Mold Inserts for the Precast Concrete Industry (CRADA NFE-17-06874 Final Report)

Oak Ridge National Laboratory worked with Gate Precast to demonstrate the viability of using carbon fiber reinforced acrylonitrile butadiene styrene (ABS) plastic and the Big Area Additive Manufacturing (BAAM) technology to rapidly manufacture molds for the precast concrete industry. This Phase 2 project focused on developing more complex molds that will be used in production.

42 ENGINEERING↗

Evaluation of Strangpresse Extruder on ORNL BAAM

Researchers at ORNL’s Manufacturing Demonstration Facility (MDF) worked with Strangpresse, LLC to demonstrate Strangpresse’s newly developed extrusion system. The project tested both a small and large Strangpresse extruder. The project also resulted in Strangpresse exclusively licensing ORNL’s some of previously developed extruder technology for high-volume additive manufacturing. The Strangpresse extruder is still under development and testing, however. The next phase of this project could include tasks such as identifying process parameters, making test articles, and quantifying material properties.

42 ENGINEERING↗

Apparatus for generating and dispensing a powdered release agent

An apparatus 20 and a method 100 for generating and dispensing a powdered 60 release agent during an additive manufacturing build is disclosed. A solid body 28 of release agent material is ground insitu by a grinder 50 and dispensed on a surface of the part 72 to prevent adhesion of an adjacent layer of a base material 70. With the addition of the powdered 60 release agent, a support structure 76 is easily separated from the base material 70 when the part 72 is complete, saving time and preventing the part 72 from sustaining unintentional damage. Since no powdered 60 release agent is actually loaded or stored in the apparatus 20, the potential for spillage, waste, inconsistent dispensing, inadvertent dispensing, and clumping due to humidity is eliminated.

36 MATERIALS SCIENCE↗

Using Big Area Additive Manufacturing to directly manufacture a boat hull mould

Big Area Additive Manufacturing (BAAM) is a large-scale, 3D printing technology developed by Oak Ridge National Laboratory's Manufacturing Demonstration Facility and Cincinnati, Inc. The ability to quickly and cost-effectively manufacture unique moulds and tools is currently one of the most significant applications of BAAM. This work details the application of a BAAM system to fabricate a 10.36 m (34 ft) catamaran boat hull mould. The goal of this project was to explore the feasibility of using BAAM to directly manufacture a mould without the need for thick coatings. The mould was printed in 12 individual sections over a five-day period. After printing, the critical surfaces of the mould were CNC-machined, the sections were assembled, and a final hull was manufactured using the mould. As a result, the success of this project illustrates the time and cost savings of BAAM in the fabrication of large moulds.

3D printing↗

Large-Scale Additive Manufacturing for Low Cost Small-Scale Wind Turbine Manufacturing

Oak Ridge National Laboratory’s Manufacturing Demonstration Facility worked with XZERES Wind to fabricate small (in comparison to traditional wind energy systems) wind turbine blades using large-scale polymer additive manufacturing (AM). The results of this project showed promise for the use of AM in the production of small wind energy systems. Although, the large-scale polymer AM systems available for this project proved to be too large for this application, ORNL and XZERES Wind were able to prove that AM is a viable opportunity to improve small wind turbine blades.

17 WIND ENERGY↗

Explore the Techno-Economic Viability of Using Large-Scale Additive Manufacturing (AM) For High-Performance Windows

Use of 3D printing, or additive manufacturing (AM) technology, in window design and construction is an under-explored area of research. Given the rapid advancements in AM technology and the potential for AM to address significant challenges associated with window design and manufacturing, there was a need to explore the feasibility of using AM technology. Alcoa’s Kawneer (Alcoa Building and Construction Systems) partnered with Oak Ridge National Laboratory’s (ORNL) Manufacturing Demonstration Facility (MDF) to explore the technical and commercial viability of large-scale 3D printing technologies with Kawneer’s AM window design. The project combined Alcoa/Kawneer’s design and expertise with ORNL’s equipment capability to create and study the world’s first 3D printed window using Big Area Additive Manufacturing (BAAM) technology. The results show that AM is useful for creating custom window shapes and sizes. With AM, more efficient windows can be made by sealing the glass pane into the printed frame during the printing process. In addition to energy savings, the use of AM reduces the manual labor required to produce custom windows.

36 MATERIALS SCIENCE↗

BAAM Additive Manufacturing of Magnetically Levitated Wind Turbine

ORNL worked with Hover Energy LLC (Hover) on the design of Big Area Additive Manufacturing (BAAM) extrusion components. The objective of this technical collaboration was to identify and evaluate fabrication of components using alternative additive manufacturing techniques. Multiple candidate parts were identified. A design modification to fabricate diverters using additive manufacturing (AM) was performed and the part was analyzed based on anticipated wind loading. Scaled versions of two parts were printed using the BAAM for wind tunnel testing.

17 WIND ENERGY↗

Pellet to Part Manufacturing System for CNCs

Oak Ridge National Laboratory’s Manufacturing Demonstration Facility worked with Hybrid Manufacturing Technologies to develop a compact prototype composite additive manufacturing head that can effectively extrude injection molding pellets. The head interfaces with conventional CNC machine tools enabling rapid conversion of conventional machine tools to additive manufacturing tools. The intent was to enable wider adoption of Big Area Additive Manufacturing (BAAM) technology and combine BAAM technology with conventional machining systems.

42 ENGINEERING↗

Gates Precast Concrete User Project Phase 1

The primary objective of the project was to demonstrate the viability of using carbon fiber reinforced ABS plastic and the Big Area Additive Manufacturing (BAAM) technology to rapidly manufacture molds for the precast concrete industry.

36 MATERIALS SCIENCE↗