Search NASA⌕ Search

Engineering topics

Rosenbaum, Eilis

Publications and source records attributed to Rosenbaum, Eilis.

At least 19 records

EOR in Shale Resources

This work provides an overview of the research conducted at NETL and the University of Pittsburgh related to improving the perfornace of CO2 huff-and-puff enhanced oil recovery (EOR) in fractured shale and fractured tight formations. CO2-soluble wettability-altering surfactants will be dissolved in high pressure CO2 during the "huff" stages in an attempt to shift the wettability of shale surfaces away from oil-wet toward CO2-wet. Such a change should promote additinal oil recovery during the depressurization of the formation that occurs during the "puff" stages. Surfactant soubility in CO2, CO2-oil IFT, CO2-rock-oil contact angle, and core-scale huff and puff oil recovery results are presented.

Enick, Robert↗

Motion of Air Bubbles in a Cement Slurry

The dynamics of air (gas) bubbles in a column of cement slurry is examined numerically. The air injected at the bottom of a laboratory-scale column through a porous distributor plate spatially distributes and migrates as a swarm of bubbles throughout the slurry toward the freeboard. The two-phase system of the cement slurry and the air bubbles is modeled using the conservation equations of mass and linear momentum in the framework of the volume-of-fluid (VOF) approach. The cement slurry is modeled using the Herschel–Bulkley and Bingham fluid models. Results show that the mean Sauter diameter and the mean rise velocity of the bubbles decrease with the gas flow rate. Meanwhile, it is found that the rising of the bubbles is controlled by breakup events, along with relatively weak path instabilities of the bubbles resulting in relatively straight trajectories, independent of the gas flow rate. The extent of the yielded region appears larger for the Herschel–Bulkley model compared to the Bingham fluid model (by approximately 10%).

36 MATERIALS SCIENCE↗

CT_Data_of_Gas_Migration_in_Setting_Cement

Computed tomography experimental data associated with the submitted manuscript "Migration of air bubbles in a column of cement slurry" by N’dri Arthur Konan, Eilis Rosenbaum, Dustin Crandall, Mehrdad Massoudi. Full description with citation to be updated when manuscript is accepted.

Computed Tomography↗

The Effects of Conditioning and Additives on the Viscosity Measurement of Cement Slurries

This study compares the rheological properties of several cement slurries of Class H, Class G, and two pozzolan-amended cement recipes. Viscosity measurements were taken on both preconditioned and unconditioned cement slurries. Tests were performed using a dual cylinder viscometer following the recommendations of the American Petroleum Institute (API). It was observed that the effect of conditioning on viscosity increased with the increase of particle size in the comparison of Class G to Class H cement. The addition of fly ash significantly changed how cement would react to conditioning. The unconditioned pozzolan-amended cement slurry’s viscosity decreased with the addition of fly ash, whereas the conditioned pozzolan-amended cement slurry increased with the addition of fly ash.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Response of a Herschel–Bulkley Fluid Due to a Moving Plate

In this paper, we study the boundary-layer flow of a Herschel–Bulkley fluid due to a moving plate; this problem has been experimentally investigated by others, where the fluid was assumed to be Carbopol, which has similar properties to cement. The computational fluid dynamics finite volume method from the open-source toolbox/library OpenFOAM is used on structured quad grids to solve the mass and the linear momentum conservation equations using the solver “overInterDyMFoam” customized with non-Newtonian viscosity libraries. The governing equations are solved numerically by using regularization methods in the context of the overset meshing technique. The results indicate that there is a good comparison between the experimental data and the simulations. The boundary layer thicknesses are predicted within the uncertainties of the measurements. The simulations indicate strong sensitivities to the rheological properties of the fluid.

36 MATERIALS SCIENCE↗

Pulsating Poiseuille flow of a cement slurry

In this paper, we investigate the pulsatile flow of a cement slurry in a pipe. The constitutive relation for the viscous stress tensor is based on the power-law model, where the shear viscosity not only depends on the shear rate but also the volume fraction of the cement particles. To solve for the volume fraction field, a convection-diffusion equation is used. The dimensionless form of the governing equations and the boundary conditions are solved numerically at different pulsatile cycles. Further, a parametric study is conducted to study the effect of different dimensionless numbers at different cycles on the velocity and the volume fraction profiles.

36 MATERIALS SCIENCE↗

The Importance of Vane Configuration on Yield Stress Measurements of Cement Slurry

Vane methods combined with direct shear tests are widely applied to measure the yield stress $τ_0$ in concentrated suspensions such as cement slurries. This report reviews three different vanes with different shapes and sizes, and examines the relationship between the yield stress versus the torque and the shear rate versus the angular velocity. This research shows that vanes with conical shapes or reduced height/diameter ratio $(H/D)$ result in larger yield stress values.

36 MATERIALS SCIENCE↗

Surfactant stabilized bubbles flowing in a Newtonian fluid

Bubbles suspended in a fluid cause the suspension to have different rheological properties than the base fluid. In general, the viscosity of the suspension increases as the volume fraction of the bubbles is increased. A current application, and motivation for this study, is in wellbore cements used for hydrocarbon extraction and carbon sequestration. In these settings, the gas bubbles are dispersed into the cement to reduce the density as well as improve the properties for specific conditions or wellbore issues. In this paper, we use Stokesian dynamics to numerically simulate the behavior of a large number of bubbles suspended in a Newtonian fluid. Going beyond prior work on simulating particles in suspension, we account for the nature of bubbles by allowing for slip on the bubble surface, the deflection on the bubble surface, and a bubble–bubble pairwise interaction that represents the surfactant physics; we do not account for bubble compressibility. We incorporate these interactions and simulate bubble suspensions of monodisperse size at several volume fractions. We find that the bubbles remain better dispersed compared with hard spherical particles that show a greater tendency to structure or cluster.

Rosenbaum, Eilis↗