Search NASA⌕ Search

Engineering topics

Ross, D. K.

Publications and source records attributed to Ross, D. K..

At least 37 records · Page 2

Spinel-Bearing, Al-Rich Chrondrules in the Unequilibrated Ordinary Chondrite NWA7402

Several Al-rich chondrules (ARCs) have been discovered in the unequilibrated ordinary chondrite NWA7402. Two of these three ARCs are spinel-bearing. Here we have characterized these unusual chondrules with respect to their mineralogy and bulk compositions. These objects will be targets for future O and Mg isotope analysis. NWA7402 is clearly unequilibrated, with wide ranges of olivine compositions in chondrules (Fo99-Fo70, excluding rims). Chromium-oxide contents in olivine, and Raman organic spectral parameters support the classification of this meteorite as petrologic type 3.1 [1]. NWA7402 is similar to, and could be paired with NWA5717, in that they both possess light and dark lithologies.

Ross, D. K.↗

A New Type of Foreign Clast in A Polymict Ureilite: A CAI or AL-Rich Chondrule

Introduction: Polymict ureilites are breccias interpreted to represent regolith formed on a ureilitic asteroid [1-3]. They consist of approximately 90-95% clasts of various ureilite types (olivine-pyroxene rocks with Fo 75-95), a few % indigenous feldspathic clasts, and a few % foreign clasts [4-20]. The foreign clasts are diverse, including fragments of H, L, LL and R chondrites, angrites, other achondrites, and dark clasts similar to CC [6,7,9-19]. We report a new type of foreign clast in polymict ureilite DaG 999. Methods: Clast 8 in Dar al Gani (DaG) 999/1 (Museum fur Naturkunde) was discovered during a survey of feldspathic clasts in polymict ureilites [19,20]. It was studied by BEI, EMPA, and X-ray mapping on the JEOL 8530F electron microprobe at ARES, JSC. Petrography and Mineral Compositions: Clast 8 is sub-rounded to irregular in shape, approximately 85 micrometers in diameter, and consists of approximately 68% pyroxene and 32% mesostasis (by area). Part of the pyroxene (top half of clast in Fig. 1a and 2) shows a coarse dendritic morphology; the rest appears massive. Mesostasis may be glassy and contains fine needles/grains of pyroxene. The pyroxene has very high CaO (23.5 wt.%) and Al2O3 (19.7 wt.%), with the formula: (Ca(0.91)Mg(0.63)Fe(0.01)Al(sup VI) (0.38)Cr(0.01)Ti(0.05)1.99 Si2O6. The bulk mesostasis also has very high Al2O3 (approximately 26 wt.%). A bulk composition for the clast was obtained by combining modal abundances with phase compositions (Table 1, Fig. 3). Discussion: The pyroxene in clast 8 has a Ca-Al-(Ti)- rich (fassaitic) composition that is clearly distinct from compositions of pyroxenes in main group ureilites [22] or indigenous feldspathic clasts in polymict ureilites [4-8]. It also has significantly higher Al than fassaite in angrites (up to approximately 12 wt.% [23]), which occur as xenoliths in polymict ureilites. Ca-Al-Ti rich pyroxenes are most commonly found in CAIs, Al-rich chondrules and other types of refractory inclusions in chondrites [21,24-31]. However, the clast 8 pyroxene matches only the most Al-Ca-rich of these, e.g., pyroxenes in type B CAIs in CV3 chondrites [25,30,31], a pyroxene-hibonite spherule and a pyroxene-anorthitespinel fragment from unique CC Acfer 094 [29], and one Al-rich chondrule from Chainpur (LL3.4) [21]. The mineralogy of clast 8 is not consistent with the mineral assemblages of any of these objects (since it lacks hibonite, spinel and/or anorthite), which suggests that it is unrepresentatively sectioned or is a fragment of a more mineralogically diverse object. Its bulk composition (Table 1; Fig. 3) is similar to bulk compositions of some Al-rich chondrules, as well as those of Type C CAIs (which plot in the sp+An+L field in Fig. 3), although it is enriched in silica relative to type C CAIs [e.g., 31]. This suggests a more likely affinity to Al-rich chondrules, although most Al-rich chondrules have less Al-Ca-rich pyroxene [21,26,27]. These bulk compositional comparisons may not be definitive, however, if the clast is unrepresentatively sampled. One of eleven Al-rich chondrules from UOCs described by [21] has textural and compositional characteristics that make it a possible progenitor type for clast 8. This chondrule (Chainpur 1251-14-2) is anorthiteporphyritic, with an interstitial dendritic intergrowth of pyroxene (similar in composition to that in clast 8) and plagioclase [21]. Clast 8 is conceivably a fragment from the interstitial area of such an object. The occurrence of glassy mesostasis (in clast 8) rather than plagioclase may not be a significant difference; it could result from a difference only in cooling rate. Al-rich chondrules with glassy mesostasis are rare, and known occurrences are Ca-poor [26], unlike clast 8. Polymict ureilites are known to contain xenoliths of various chondrites (including OC, R and CC) as well as individual ferromagnesian and silica-pyroxene chondrules probably derived from OC or RC [6,9,15,16,18]. This is the first report of an individual chondritic refractory inclusion as a xenolith in a polymict ureilite. An RC-like sample from anomalous polymict ureilite Almahata Sitta contains CAIs, but they are spinel-rich and not similar to clast 8 [13,14]. Further studies of this clast (which, unfortunately, may not be possible), or the discovery of additional (more representative?) materials of this type would be needed to determine the exact nature of this xenolith and the type of chondrite from which it is derived.

Goodrich, C. A.↗

C Chondrite Clasts in H Chondrite Regolith Breccias: Something Different

Zag (H3-6) and Monahans (1998) (H5) are regolith breccias that contain 4.5 GY old halite crystals which in turn contain abundant inclusions of aqueous fluids, solids and organics [1-4]. We have previously proposed that these halites originated on a hydro-volcanically-active C-class asteroid, probably Ceres [3-7]. We have begun a detailed analysis of the included solids and organics and are re-examining the related carbonaceous (C)) chondrite clast we previously reported in Zag [5-7]. These new investigations will potentially reveal the mineralogy of asteroid Ceres. We report here on potentially identical C chondrite clasts in the H chondrite regolith breccias Tsukuba (H5-6) and Carancas (H4-5). The clast in Tsukuba was known before [8], but the Carancas clast is newly recognized.

Zolensky, M. E.↗

Metal-Silicate-Sulfide Partitioning of U, Th, and K: Implications for the Budget of Volatile Elements in Mercury

During formation of the solar system, the Sun produced strong solar winds, which stripped away a portion of the volatile elements from the forming planets. Hence, it was expected that planets closest to the sun, such as Mercury, are more depleted in volatile elements in comparison to other terrestrial planets. However, the MESSENGER mission detected higher than expected K/U and K/Th ratios on Mercury's surface, indicating a volatile content between that of Mars and Earth. Our experiments aim to resolve this discrepancy by experimentally determining the partition coefficients (D(sup met/sil)) of K, U, and Th between metal and silicate at varying pressure (1 to 5 GPa), temperature (1500 to 1900 C), oxygen fugacity (IW-2.5 to IW-6.5) and sulfur-content in the metal (0 to 33 wt%). Our data show that U, Th, and K become more siderophile with decreasing fO2 and increasing sulfur-content, with a stronger effect for U and Th in comparison to K. Using these results, the concentrations of U, Th, and K in the bulk planet were calculated for different scenarios, where the planet equilibrated at a fO2 between IW-4 and IW-7, assuming the existence of a FeS layer, between the core and mantle, with variable thickness. These models show that significant amounts of U and Th are partitioned into Mercury's core. The elevated superficial K/U and K/Th values are therefore only a consequence of the sequestration of U and Th into the core, not evidence of the overall volatile content of Mercury.

Habermann, M.↗

Melting of the Primitive Mercurian Mantle, Insights into the Origin of Its Surface Composition

Recent findings of the MESSENGER mission on Mercury have brought new evidence for its reducing nature, widespread volcanism and surface compositional heteregeneity. MESSENGER also provided major elemental ratios of its surface that can be used to infer large-scale differentiation processes and the thermal history of the planet. Mercury is known as being very reduced, with very low Fe-content and high S and alkali contents on its surface. Its bulk composition is therefore likely close to EH enstatite chondrites. In order to elucidate the origin of the chemical diversity of Mercury's surface, we determined the melting properties of EH enstatite chondrites, at pressures between 1 bar and 3 GPa and oxygen fugacity of IW-3 to IW-5, using piston-cylinder experiments, combined with a previous study on EH4 melting at 1 bar. We found that the presence of Ca-rich sulfide melts induces significant decrease of Ca-content in silicate melts at low pressure and low degree of melting (F). Also at pressures lower than 3 GPa, the SiO2-content decreases with F, while it increases at 3 GPa. This is likely due to the chemical composition of the bulk silicate which has a (Mg+Fe+Ca)/Si ratio very close to 1 and to the change from incongruent to congruent melting of enstatite. We then tested whether the various chemical compositions of Mercury's surface can result from mixing between two melting products of EH chondrites. We found that the majority of the geochemical provinces of Mercury's surface can be explained by mixing of two melts, with the exception of the High-Al plains that require an Al-rich source. Our findings indicate that Mercury's surface could have been produced by polybaric melting of a relatively primitive mantle.

Boujibar, A.↗

Implications for Metallographic Cooling Rates, Derived from Fine-Scale Analytical Traverses Across Kamacite, Taenite, and Tetrataenite in the Butler Iron Meteorite

The "M-shaped" Ni concentrations across Widmanstatten patterns in iron meteorites, mesosiderites, and ordinary chondrites are commonly used to calculate cooling rates. As Ni-poor kamacite exolves from Ni-rich taenite, Ni concentrations build up at the kamacite-taenite interface because of the sluggish diffusivity of Ni. Quantitative knowledge of experimentally-determined Ni diffusivities, coupled with the shape of the M-profile, have been used to allow calculation of cooling rates that pertained at low temperatures, less than or equal to 500 C. However, determining Ni metallographic cooling rates are challenging, due to the sluggish diffusivity of Ni at low temperatures. There are three potential difficulties in using Ni cooling rates at low temperatures: (i) Ni diffusivities are typically extrapolated from higher-temperature measurements; (ii) Phase changes occur at low temperatures that may be difficult to take into account; and (iii) It appears that Ge in kamacite and taenite has continued to equilibrate (or attempted to equilibrate) at temperatures below those that formed the M-shaped Ni profile. Combining Ni measurements with those of other elements has the potential to provide a way to confirm or challenge Ni-determined cooling rates, as well as provide insight into the partitioning behaviors of elements during the cooling of iron meteorites. Despite these benefits, studies that examine elemental profiles of Ni along with other elements in iron meteorites are limited, often due to the low concentration levels of the other elements and associated analytical challenges. The Butler iron meteorite provides a good opportunity to conduct a multi-element analytical study, due to the higher concentration levels of key elements in addition to Fe and Ni. In this work, we perform combined analysis for six elements in the Butler iron to determine the relative behaviors of these elements during the evolution of iron meteorites, with implications for metallographic cooling rates.

Jones, J. H.↗

New Petrology, Mineral Chemistry and Stable MG Isotope Compositions of an Allende CAI: EK-459-7-2

Calcium-aluminum-rich inclusions (CAIs) are the key to understanding physical and chemical conditions in the nascent solar nebula. These inclusions have the oldest radiometric ages of solar system materials and are composed of phases that are predicted to condense early from a gas of solar composition. Thus, their chemistry and textures record conditions and processes in the earliest stages of development of the solar nebula. Type B inclusions are typically larger and more coarse grained than other types with substantial evidence that many of them were at least partially molten. Type B inclusions are further subdivided into Type B1 (possess thick melilite mantle) and Type B2 (lack melilite mantle). Despite being extensively studied, the origin of the melilite mantles of Type B1 inclusions remains uncertain. We present petrologic and chemical data for a Type B inclusion, EK-459-7-2, that bears features found in both Type B1 and B2 inclusions and likely represents an intermediate between the two types. Detailed studies of more of these intermediate objects may help to constrain models for Type B1 rim formation.

Jeffcoat, C. R.↗

The Origin of Mercury's Surface Composition, an Experimental Investigation

Introduction: Results from MESSENGER spacecraft have confirmed the reduced nature of Mercury, based on its high core/mantle ratio and its FeO-poor and S-rich surface. Moreover, high resolution images revealed large volcanic plains and abundant pyroclastic deposits, suggesting major melting stages of the Mercurian mantle. In addition, MESSENGER has provided the most precise data to date on major elemental compositions of Mercury's surface. These results revealed considerable chemical heterogeneities that suggested several stages of differentiation and re-melting processes. This interpretation was challenged by our experimental previous study, which showed a similar compositional variation in the melting products of enstatite chondrites, which are a possible Mercury analogue. However, these experimental melts were obtained over a limited range of pressure (1 bar to 1 gigapascal) and were not compared to the most recent elemental maps. Therefore, here we extend the experimental dataset to higher pressures and perform a more quantitative comparison with Mercury's surface compositions measured by MESSENGER. In particular, we test whether these chemical heterogeneities result from mixing between polybaric melts. Our experiments and models show that the majority of chemical diversity of Mercury's surface can result from melting of a primitive mantle compositionally similar to enstatite chondrites in composition at various depths and degrees of melting. The high-Mg region's composition is reproduced by melting at high pressure (3 gigapascals) (Tab. 1), which is consistent with previous interpretation as being a large degraded impact basin based on its low elevation and thin average crust. While low-Mg NVP (North Volcanic Plains) are the result of melting at low pressure (1 bar), intermediate-Mg NVP, Caloris Basin and Rachmaninoff result from mixing of a high-pressure (3 gigapascals) and low-pressure components (1 bar for Rachmaninoff and 1 gigapascal for the other regions) (Tab. 1). Moreover, all compositions suggest mixing between low and high degree melts that indicate important differentiation processes.

Boujibar, A.↗

Petrologic and Oxygen-Isotopic Investigations of Eucritic and Anomalous Mafic Achondrites

The most common asteroidal igneous meteorites are eucrite-type basalts and gabbros rocks composed of ferroan pigeonite and augite, calcic plagioclase, silica, ilmenite, troilite, Ca-phosphate, chromite and Fe-metal. These rocks are thought to have formed on a single asteroid along with howardites and diogenites (HEDs). However, Northwest Africa (NWA) 011 is mineralogically identical to eucrites, but has an O-isotopic composition distinct from them and was derived from a different asteroid. Modern analyses with higher precision have shown that some eucrites have smaller O-isotopic differences that are nevertheless well-resolved from the group mean.

Mittlefehldt, D. W.↗

CAIs in Semarkona (LL3.0)

Calcium, Aluminum-rich inclusions (CAIs) are the first forming solids of the Solar system. Their observed abundance, mean size, and mineralogy vary quite significantly between different groups of chondrites. These differences may reflect the dynamics and distinct cosmochemical conditions present in the region(s) of the protoplanetary disk from which each type likely accreted. Only about 11 such objects have been found in L and LL type while another 57 have been found in H type ordinary chondrites, compared to thousands in carbonaceous chondrites. At issue is whether the rare CAIs contained in ordinary chondrites truly reflect a distinct population from the inclusions commonly found in other chondrite types. Semarkona (LL3.00) (fall, ~691 g) is the most pristine chondrite available in our meteorite collection. Here we report petrography and mineralogy of 3 CAIs from Semarkona

Mishra, R. K.↗

Al-Mg Isotope Study of Allende 5241

The defining characteristic of type B1 CAIs is a large (.5- 3mm) concentric melilite mantle [1]. In [2] we presented two isochrons from separate traverses across the melilite mantle of Allende EK 459-5-1. The primary petrographic differences between the traverses was the preservation of strong oscillatory zoning. The traverse that crossed the distinctive oscillatory zone produced a pristine internal isochron, while the other that did not have a strongly preserved oscillatory zone produced a disturbed isochron indicated by more scatter (higher MSWD) and a positive (delta)26Mg* intercept. The implication simply being that the oscillatory zone may represent varying conditions during the mantle formation event. We targeted a similar texture in Allende 5241 using the same methodology in an attempt to achieve similar results.

Kerekgyarto, A. G.↗

Vanadium K Xanes Studies of EET79001 Impact-Melt Glasses Revisited

Some impact-melt glasses in shergottites are rich in Martian atmospheric noble gases and sulfur suggesting a possible association with regolith-derived secondary mineral assemblages in the shocked samples. Previously, we studied two glasses, # 506 (Lith C in Lith A) and # 507 (Lith C in Lith B) from EET79001 [1,2] and suggested that sulfur initially existed as sulfate in the glass precursor materials and, on shock-melting of the precursors, the sulfate was reduced to sulfides in the shock glasses. To examine the validity of this hypothesis, we used V K microXANES techniques to measure the valence states of vanadium in the Lith C glasses from Lith A and Lith B in EET79001 [3] to complement and com-pare with previous analogous measurements on,78 glass (Lith C in Lith A) [4,5]. We reported the preliminary results in [3]. Vanadium is ideal for addressing the redox issue because it has multiple valence states and is a well-studied element. Vanadium in basalts exists mostly as V(sup 3+), V(sup 4+) and V(sup 5+) in terrestrial samples, mainly as V(sup 3+) with minor V(sup 2+) and minor V(sup 4+) in lunar samples and as roughly equal mixtures of V(sup 3+) and V(sup 4+) in Martian meteorites. In this report, we discuss the application of the V K XANES results to decipher the nature of shock reduction occurring in the silicate glasses during the impact process.

Sutton, S. R.↗

Partitioning of U, Th and K Between Metal, Sulfide and Silicate, Insights into the Volatile-Content of Mercury

During the early stages of the Solar System formation, especially during the T-Tauri phase, the Sun emitted strong solar winds, which are thought to have expelled a portion of the volatile elements from the inner solar system. It is therefore usually believed that the volatile depletion of a planet is correlated with its proximity to the Sun. This trend was supported by the K/Th and K/U ratios of Venus, the Earth, and Mars. Prior to the MESSENGER mission, it was expected that Mercury is the most volatile-depleted planet. However, the Gamma Ray Spectrometer of MESSENGER spacecraft revealed elevated K/U and K/Th ratios for the surface of Mercury, much higher than previous expectations. It is possible that the K/Th and K/U ratios on the surface are not a reliable gauge of the bulk volatile content of Mercury. Mercury is enriched in sulfur and is the most reduced of the terrestrial planets, with oxygen fugacity (fO2) between IW-6.3 and IW-2.6 log units. At these particular compositions, U, Th and K behave differently and can become more siderophile or chalcophile. If significant amounts of U and Th are sequestered in the core, the apparent K/U and K/Th ratios measured on the surface may not represent the volatile budget of the whole planet. An accurate determination of the partitioning of these elements between silicate, metal, and sulfide phases under Mercurian conditions is therefore essential to better constrain Mercury's volatile content and assess planetary formation models.

Habermann, M.↗

The Mineralogy and Petrology of Anomalous Eucrite Emmaville

It has long been known that certain basaltic achondrites share similarities with eucrites. These eucrite-like achondrites have distinct isotopic compositions and petrologic characteristics indicative of formation on a separate parent body from the howardite-eucrite-diogenite (HED) clan (e.g., Ibitira, Northwest Africa (NWA) 011). Others show smaller isotopic variations but are otherwise petrologically and compositionally indistinguishable from basaltic eucrites (e.g., Pasamonte, Pecora Escarpment (PCA) 91007). The Emmaville eucrite has a delta O-17 value of -0.137 plus or minus 0.024 per mille (1 sigma), which is substantially different from the eucrite mean of -0.246 plus or minus 0.014 per mille (2 sigma), but similar to those of A-881394 and Bunburra Rockhole (BR). Currently little data exist for Emmaville in terms of petrology or bulk composition. Studying anomalous eucrites allows us to more completely understand the numbers of asteroids represented by eucrite- like basalts and thus constrain the heterogeneity of the HED suite. In this study, we present our preliminary petrological and mineral composition results for Emmaville.

Barrett, T. J.↗

Petrology of Anomalous Eucrites

Most mafic achondrites can be broadly categorized as being "eucritic", that is, they are composed of a ferroan low-Ca clinopyroxene, high-Ca plagioclase and a silica phase. They are petrologically distinct from angritic basalts, which are composed of high-Ca, Al-Ti-rich clinopyroxene, Carich olivine, nearly pure anorthite and kirschsteinite, or from what might be called brachinitic basalts, which are composed of ferroan orthopyroxene and high-Ca clinopyroxene, intermediate-Ca plagioclase and ferroan olivine. Because of their similar mineralogy and composition, eucrite-like mafic achondrites formed on compositionally similar asteroids under similar conditions of temperature, pressure and oxygen fugacity. Some of them have distinctive isotopic compositions and petrologic characteristics that demonstrate formation on asteroids different from the parent of the HED clan (e.g., Ibitira, Northwest Africa (NWA) 011). Others show smaller oxygen isotopic distinctions but are otherwise petrologically and compositionally indistinguishable from basaltic eucrites (e.g., Pasamonte, Pecora Escarpment (PCA) 91007). The degree of uniformity in delta O-17 of eucrites and diogenites is one piece of evidence considered to favor of a magma-ocean scenario for their petrogenesis. Given that the O isotopic differences separating Pasamonte and PCA 91007 from other eucrites are small, and that there is an absence of other distinguishing characteristics, a legitimate question is: Did the HED parent asteroid fail to homogenize via a magma-ocean stage, thus explaining outliers like Pasamonte? We are initiating a program of study of anomalous eucrite-like achondrites as one part of our effort to seek a resolution of this issue. Here we present preliminary petrologic information on Asuka (A-) 881394, Elephant Moraine (EET) 87520 and EET 87542. We will have studied several more by conference time.

Mittlefehldt, D. W.↗

Microstructural and Compositional Relations of Granitoid Clasts in Lunar Breccias at the Micrometer to Sub-Micrometer Scale

Lunar granitoid lithologies have long been of interest for the information they provide on processes leading to silicic melt compositions on the Moon. The extraction of such melts over time affects the distribution and budget of incompatible materials (i.e., radiogenic heat producing elements and volatiles) of the lunar interior. We have recently shown that in addition to their high concentrations of incompatible lithophile elements, some granitoid clasts in lunar breccias have significant indigenous water contents in their alkali feldspars. This raises the importance of lunar granitoid materials in the expanding search for mineralogic/petrologic hosts of indigenous lunar water-related species. We are undertaking a detailed survey of the petrologic/mineralogical relations of granitoid clasts in lunar breccias to achieve a better understanding of the potential of these diverse assemblages as hosts for volatiles, and as candidates for additional isotope chronology studies. Our preliminary results reported here based on high-resolution field-emission SEM, EPMA and TEM studies uncover immense complexity in these materials at the micrometer to sub-micrometer scale that heretofore have not been fully documented.

Christoffersen, R.↗