Search NASA⌕ Search

Engineering topics

Rossi, A.

Publications and source records attributed to Rossi, A..

At least 19 records

Physical properties of asteroid Dimorphos as derived from the DART impact

On 26 September 2022, NASA’s Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to find the surface material properties and structures of the target that are consistent with the observed momentum deflection efficiency, ejecta cone geometry and ejected mass. Our simulation that best matches the observations indicates that Dimorphos is weak, with a cohesive strength of less than a few pascals, like asteroids (162173) Ryugu and (101955) Bennu. We find that the bulk density of Dimorphos ρ B is lower than ~2,400 kg m – 3 and that it has a low volume fraction of boulders (≲40 vol%) on the surface and in the shallow subsurface, which are consistent with data measured by the DART experiment. These findings suggest that Dimorphos is a rubble pile that might have formed through rotational mass shedding and reaccumulation from Didymos. Our simulations indicate that the DART impact caused global deformation and resurfacing of Dimorphos. ESA’s upcoming Hera mission may find a reshaped asteroid rather than a well-defined crater.

79 ASTRONOMY AND ASTROPHYSICS↗

Hollow electron lenses for beam collimation at the High-Luminosity Large Hadron Collider (HL-LHC)

Electrons lenses produce a high-intensity electron beam and have a variety of applications to circular hadron accelerators. Electron beams of different transverse cross sections and distributions may be designed, depending on the desired application, and they are produced and steered along the orbit of the hadron beam, overlapping with it for typical distances of a few meters before being deflected away and disposed of. Hollow electron beams find applications to high-intensity beam collimation for machines like the CERN Large Hadron Collider (LHC). Such devices can be integrated in a collimation system to improve the halo-cleaning performance through an active control of the halo dynamics: the annular distribution of the electrons excites resonantly the beam tails surrounding the beam core, while the core itself remains unperturbed, as ideally it only “sees” the field-free “hole” in the electron distribution. Hollow electron lenses are part of the upgrade baseline of the High-Luminosity project of the LHC (HL-LHC) and will be installed in the machine during a long shutdown in 2025–2027 to mitigate effects from beam losses so to improve the collimation system performance. This paper describes the hollow electron lens project within the HL-LHC collimation upgrade.

43 PARTICLE ACCELERATORS↗

Design of high-performance guns for the HL-LHC HEL

The High Luminosity LHC project (HL-LHC) foresees the construction and installation of important new equipment to increase the performance of the LHC machine. The Hollow Electron Lens (HEL) is a promising system to control the beam halo. It improves the beam collimation system of the HL-LHC and mitigates possible equipment damage in case of failure scenarios from halo losses. The halo can store up to 30 MJ energy. The specifications for this new device are quite demanding. The source, an electron gun with an annular shaped cathode, must deliver a current up to 5 A. Additionally, this is five times higher than the current in the existing electron lenses in Fermi and Brookhaven national laboratories. This note describes the programme carried out to design and test high-perveance guns equipped with two types of high-performance scandate cathodes. The size of the final gun for the HL-LHC lenses is now considerably smaller than the one of the first prototype, allowing a reduction of diameter and cost of the superconducting magnet system used to steer the electron beam. The tests carried out at FNAL, BVERI and BJUT demonstrated that the developed cathodes fulfil the specifications and can supply a 5 A fully Space Charge Limited (SCL) current.

43 PARTICLE ACCELERATORS↗

Three interaction energy scales in the single-layer high-$T_c$ cuprate HgBa 2 CuO 4+δ

The lamellar cuprate superconductors exhibit the highest ambient-pressure superconducting transition temperatures ($T_c$), and after more than three decades of extraordinary research activity, continue to pose formidable scientific challenges. A major experimental obstacle has been to distinguish universal phenomena from materials- or technique-dependent ones. Angle-resolved photoemission spectroscopy (ARPES) measures momentum-dependent single-particle electronic excitations and has been invaluable in the endeavor to determine the anisotropic momentum-space properties of the cuprates. HgBa 2 CuO 4+δ (Hg1201) is a single-CuO 2 -layer cuprate with a particularly high optimal Tc and a simple crystal structure, yet there exists little information from ARPES about the electronic properties of this model system. In this paper we present an ARPES study of doping-, temperature-, and momentum-dependent systematics of near-nodal dispersion anomalies in Hg1201. The data reveal a hierarchy of three distinct energy scales: a subgap low-energy kink, an intermediate-energy kink near 55 meV, and a peak-dip-hump structure. The first two features are attributed to the coupling of electrons to Ba-derived optical phonons and in-plane bond-stretching phonons, respectively. The nodal peak-dip-hump structure appears to have a common doping dependence in several single-layer cuprates and is interpreted as a manifestation of pseudogap physics at the node. These results establish several universal phenomena, both in terms of connecting multiple experimental techniques for a single material and in terms of connecting comparable spectral features in multiple structurally similar cuprates.

36 MATERIALS SCIENCE↗

QCD challenges from pp to A–A collisions

This paper is a write-up of the ideas that were presented, developed and discussed at the third International Workshop on QCD Challenges from pp to A–A, which took place in August 2019 in Lund, Sweden. The goal of the workshop was to focus on some of the open questions in the field and try to come up with concrete suggestions for how to make progress on both the experimental and theoretical sides. The paper gives a brief introduction to each topic and then summarizes the primary results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

XRootD Third Party Copy for the WLCG and HLLHC

A Third Party Copy (TPC) mechanism has existed in the pure XRootD storage environment for many years. However, using the XRootD TPC in the WLCG environment presents additional challenges due to the diversity of the storage systems involved such as EOS, dCache, DPM and ECHO, requiring that we carefully navigate the unique constraints imposed by these storage systems and their site-specific environments through customized configuration and software development. To support multitenant setups seen at many WLCG sites, X509 based authentication and authorization in XRootD was significantly improved to meet both security and functionality requirements. This paper presents architecture of the pull based TPC with optional X509 credential delegation, and how it is implemented in native XRootD and dCache. The paper discusses technical requirements, challenges, design choices and implementation details in the WLCG storage systems, as well as in FTS/gfal2. It also outlines XRootD’s plan to support newer TPC and security models such as token based authorization.

Adye, T.↗

Efficient Message Serialization for Inter-Service Communication in dCache [Slides]

About dCache: A distributed petabyte-scale storage system for scientific data. Joint effort between DESY(2000), FNAL(2001) and NDGF(2006). Supports standard and HEP specific access protocols and authentication mechanisms. Developed for HERA and Tevatron, used for LHC and others: Belle II, LOFAR, CTA, IceCUBE, EU-XFEL, Petra3, DUNE, and many more.

97 MATHEMATICS AND COMPUTING↗

Topological surface states above the Fermi level in Hf 2 Te 2 P

We report a detailed experimental study of the band structure of the recently discovered topological material Hf 2 Te 2 P. Using the combination of scanning tunneling spectroscopy and angle-resolved photoemission spectroscopy with surface K doping, we probe the band structure of Hf 2 Te 2 P with energy and momentum resolution above the Fermi level. Our experiments show the presence of multiple surface states with a linear Dirac-like dispersion, consistent with the predictions from previously reported band-structure calculations. In particular, scanning tunneling spectroscopy measurements provide experimental evidence for the strong topological surface state predicted at 460 meV, which stems from the band inversion between Hf- d and Te- p orbitals. As a result, this band inversion comprised of more localized d states could result in a better surface-to-bulk conductance ratio relative to more traditional topological insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First results of the compensation of the beam-beam effect with DC wires in the LHC

The compensation of the long-range beam-beam interactions using DC wires is presently under study as an option for enhancing the machine performance in the framework of the High-Luminosity LHC Project (HL-LHC). The original idea dates back more than 15 years ago. After the installation of four wire prototypes in the LHC in 2018, a successful experimental campaign was performed. The experimental setup and the main results are reported in this paper.

43 PARTICLE ACCELERATORS↗

GRB 161219B/SN 2016jca: a powerful stellar collapse

ABSTRACT We report observations and analysis of the nearby gamma-ray burst GRB 161219B (redshift z = 0.1475) and the associated Type Ic supernova (SN) 2016jca. GRB 161219B had an isotropic gamma-ray energy of ∼1.6 × 1050 erg. Its afterglow is likely refreshed at an epoch preceding the first photometric points (0.6 d), which slows down the decay rates. Combined analysis of the SN light curve and multiwavelength observations of the afterglow suggest that the GRB jet was broad during the afterglow phase (full opening angle ∼42° ± 3°). Our spectral series shows broad absorption lines typical of GRB supernovae (SNe), which testify to the presence of material with velocities up to ∼0.25c. The spectrum at 3.73 d allows for the very early identification of an SN associated with a GRB. Reproducing it requires a large photospheric velocity ($35\, 000 \pm 7000$ km s−1). The kinetic energy of the SN is estimated through models to be Ekin≈4 × 1052 erg in spherical symmetry. The ejected mass in the explosion was Mej≈6.5 ± 1.5 M⊙, much less than that of other GRB-SNe, demonstrating diversity among these events. The total amount of 56Ni in the explosion was 0.27 ± 0.05 M⊙. The observed spectra require the presence of freshly synthesized 56Ni at the highest velocities, at least three times more than a standard GRB-SN. We also find evidence for a decreasing 56Ni abundance as a function of decreasing velocity. This suggests that SN 2016jca was a highly aspherical explosion viewed close to on-axis, powered by a compact remnant. Applying a typical correction for asymmetry, the energy of SN 2016jca was ∼(1–3) × 1052 erg, confirming that most of the energy produced by GRB-SNe goes into the kinetic energy of the SN ejecta.

Ashall, C.↗

First measurements of beam backgrounds at SuperKEKB

The high design luminosity of the SuperKEKB electron-positron collider is expected to result in challenging levels of beam-induced backgrounds in the interaction region. Properly simulating and mitigating these backgrounds is critical to the success of the Belle~II experiment. We report on measurements performed with a suite of dedicated beam background detectors, collectively known as BEAST II, during the so-called Phase 1 commissioning run of SuperKEKB in 2016, which involved operation of both the high energy ring (HER) of 7 GeV electrons as well as the low energy ring (LER) of 4 GeV positrons. We describe the BEAST II detector systems, the simulation of beam backgrounds, and the measurements performed. The measurements include standard ones of dose rates versus accelerator conditions, and more novel investigations, such as bunch-by-bunch measurements of injection backgrounds and measurements sensitive to the energy spectrum and angular distribution of fast neutrons. We observe beam-gas, Touschek, beam-dust, and injection backgrounds. We do not observe significant synchrotron radiation, as expected. Measured LER beam-gas backgrounds and Touschek backgrounds in both rings are slightly elevated, on average three times larger than the levels predicted by simulation. HER beam-gas backgrounds are on on average two orders of magnitude larger than predicted. Systematic uncertainties and channel-to-channel variations are large, so that these excesses constitute only 1-2 sigma level effects. Neutron background rates are higher than predicted and should be studied further. We will measure the remaining beam background processes, due to colliding beams, in the imminent commissioning Phase 2. These backgrounds are expected to be the most critical for Belle II, to the point of necessitating replacement of detector components during the Phase 3 (full-luminosity) operation of SuperKEB

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The THESEUS space mission concept: science case, design and expected performances

THESEUS is a space mission concept aimed at exploiting Gamma-Ray Bursts for investigating the early Universe and at providing a substantial advancement of multi-messenger and time-domain astrophysics. These goals will be achieved through a unique combination of instruments allowing GRB and X-ray transient detection over a broad field of view (more than 1sr) with 0.5–1 arcmin localization, an energy band extending from several MeV down to 0.3 keV and high sensitivity to transient sources in the soft X-ray domain, as well as on-board prompt (few minutes) follow-up with a 0.7 m class IR telescope with both imaging and spectroscopic capabilities. THESEUS will be perfectly suited for addressing the main open issues in cosmology such as, e.g., star formation rate and metallicity evolution of the inter-stellar and intra-galactic medium up to redshift ~10, signatures of Pop III stars, sources and physics of re-ionization, and the faint end of the galaxy luminosity function. In addition, it will provide unprecedented capability to monitor the X-ray variable sky, thus detecting, localizing, and identifying the electromagnetic counterparts to sources of gravitational radiation, which may be routinely detected in the late ’20s/early ’30s by next generation facilities like aLIGO/ aVirgo, eLISA, KAGRA, and Einstein Telescope. In conclusion, THESEUS will also provide powerful synergies with the next generation of multi-wavelength observatories (e.g., LSST, ELT, SKA, CTA, ATHENA).

79 ASTRONOMY AND ASTROPHYSICS↗

dCache on Steroids - Delegated Storage Solutions

For over a decade, dCache.org has delivered a robust software used at more than 80 Universities and research institutes around the world, allowing these sites to provide reliable storage services for the WLCG experiments as well as many other scientific communities. The flexible architecture of dCache allows running it in a wide variety of configurations and platforms - from a SoC based all-in-one Raspberry-Pi up to hundreds of nodes in a multipetabyte installation. Due to lack of managed storage at the time, dCache implemented data placement, replication and data integrity directly. Today, many alternatives are available: S3, GlusterFS, CEPH and others. While such solutions position themselves as scalable storage systems, they cannot be used by many scientific communities out of the box. The absence of community-accepted authentication and authorization mechanisms, the use of product specific protocols and the lack of namespace are some of the reasons that prevent wide-scale adoption of these alternatives. Most of these limitations are already solved by dCache. By delegating low-level storage management functionality to the above-mentioned new systems and providing the missing layer through dCache, we provide a solution which combines the benefits of both worlds - industry standard storage building blocks with the access protocols and authentication required by scientific communities. In this paper, we focus on CEPH, a popular software for clustered storage that supports file, block and object interfaces. CEPH is often used in modern computing centers, for example as a backend to OpenStack services. We will show prototypes of dCache running with a CEPH backend and discuss the benefits and limitations of such an approach. As a result, we will also outline the roadmap for supporting ‘delegated storage’ within the dCache releases.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

The 2015–2016 Outburst of the Classical EXor V1118 Ori

After a quiescence period of about 10 years, the classical EXor source V1118 Ori has undergone an accretion outburst in 2015 September. The maximum brightness (ΔV≳4 mag) was reached in 2015 December and was maintained for several months. Since 2016 September, the source is in a declining phase. Photometry and low/high-resolution spectroscopy were obtained with MODS and LUCI2 at the Large Binocular Telescope, with the facilities at the Asiago 1.22 and 1.82 m telescopes, and with GIANO at the Telescopio Nazionale Galileo. The spectra are dominated by emission lines of H i and neutral metallic species. From line and continuum analysis we derive the mass accretion rate and its evolution during the outburst. Considering that extinction may vary between 1.5 and 2.9 mag, we obtain M-dot {sub acc} = 0.3–2.0 10{sup −8} M {sub ⊙} yr{sup −1} in quiescence and M-dot {sub acc} = 0.2–1.9 10{sup −6} M {sub ⊙} yr{sup −1} at the outburst peak. The Balmer decrement shape has been interpreted by means of line excitation models, finding that from quiescence to outburst peak, the electron density has increased from ∼2 10{sup 9} cm{sup −3} to ∼4 10{sup 11} cm{sup −3}. The profiles of the metallic lines are symmetric and narrower than 100 km s{sup −1}, while H i and He i lines show prominent wings extending up to ±500 km s{sup −1}. The metallic lines likely originate at the base of the accretion columns, where neutrals are efficiently shielded against the ionizing photons, while faster ionized gas is closer to the star. Outflowing activity is testified by the detection of a variable P Cyg-like profile of the Hα and He i 1.08 μm lines.

79 ASTRONOMY AND ASTROPHYSICS↗

Valley splitting of single-electron Si MOS quantum dots

Here, silicon-based metal-oxide-semiconductor quantum dots are prominent candidates for high-fidelity, manufacturable qubits. Due to silicon's band structure, additional low-energy states persist in these devices, presenting both challenges and opportunities. Although the physics governing these valley states has been the subject of intense study, quantitative agreement between experiment and theory remains elusive. Here, we present data from an experiment probing the valley states of quantum dot devices and develop a theory that is in quantitative agreement with both this and a recently reported experiment. Through sampling millions of realistic cases of interface roughness, our method provides evidence that the valley physics between the two samples is essentially the same.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

GRASPING THE NATURE OF POTENTIALLY HAZARDOUS ASTEROIDS

Through their delivery of water and organics, near-Earth objects (NEOs) played an important role in the emergence of life on our planet. However, they also pose a hazard to the Earth, as asteroid impacts could significantly affect our civilization. Potentially hazardous asteroids (PHAs) are those that, in principle, could possibly impact the Earth within the next century, producing major damage. About 1600 PHAs are currently known, from an estimated population of 4700 ± 1450. However, a comprehensive characterization of the PHA physical properties is still missing. Here we present spectroscopic observations of 14 PHAs, which we have used to derive their taxonomy, meteorite analogs, and mineralogy. Combining our results with the literature, we investigated how PHAs are distributed as a function of their dynamical and physical properties. In general, the “carbonaceous” PHAs seem to be particularly threatening, because of their high porosity (limiting the effectiveness of the main deflection techniques that could be used in space) and low inclination and minimum orbit intersection distance (MOID) with the Earth (favoring more frequent close approaches). V-type PHAs also present low MOID values, which can produce frequent close approaches (as confirmed by the recent discovery of a limited space weathering on their surfaces). We also identified those specific objects that deserve particular attention because of their extreme rotational properties, internal strength, or possible cometary nature. For PHAs and NEOs in general, we identified a possible anti-correlation between the elongation and the rotational period, in the range of P{sub rot} ≈ 5–80 hr. This would be compatible with the behavior of gravity-dominated aggregates in rotational equilibrium. For periods ≳80–90 hr, such a trend stops, possibly under the influence of the YORP effect and collisions. However, the statistics is very low, and further observational and theoretical work is required to characterize such slow rotators.

79 ASTRONOMY AND ASTROPHYSICS↗

A planar Al-Si Schottky barrier metal–oxide–semiconductor field effect transistor operated at cryogenic temperatures

Schottky Barrier-MOSFET technology offers intriguing possibilities for cryogenic nano-scale devices, such as Si quantum devices and superconducting devices. We present experimental results on a device architecture where the gate electrode is self-aligned with the device channel and overlaps the source and drain electrodes. This facilitates a sub-5 nm gap between the source/drain and channel, and no spacers are required. At cryogenic temperatures, such devices function as p-MOS Tunnel FETs, as determined by the Schottky barrier at the Al-Si interface, and as a further advantage, fabrication processes are compatible with both CMOS and superconducting logic technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗