Search NASA⌕ Search

Engineering topics

Rossmeisl, Jan

Publications and source records attributed to Rossmeisl, Jan.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Coverage, repulsion, and reactivity of hydrogen on High-Entropy alloys

Modeling hydrogen evolution reaction (HER) activity probability on IrPdPtRhRu(1 1 1) high-entropy alloys. Determining hydrogen coverages based on ligand effects and generalized hydrogen–hydrogen repulsion. The rate of H 2 formation is highly impacted by the level of hydrogen coverage on the catalyst surface. In search of optimal catalytic properties high-entropy alloys (HEA) are promising candidates that utilize the compositional space of multiple elements. Based on simulations of HEA model (1 1 1) surfaces with a range of hydrogen coverages, distributions of binding energies are used to construct a framework that approximates the probability that adsorbed hydrogen may lead to the formation of H 2 as a function of applied potential. By optimizing the alloy compositions for the highest activity probability at given potentials the best and most efficient catalyst candidates for HER can be identified. Treating hydrogen–hydrogen repulsion effects and binding energy separately, we find that the repulsion is larger for HEAs than for pure metals. Differing isotherm slopes in the mean adsorption and desorption energies demonstrate a possible hysteresis for hydrogen adsorption on HEAs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cooperative Effects Drive Water Oxidation Catalysis in Cobalt Electrocatalysts through the Destabilization of Intermediates

A barrier to understanding the factors driving catalysis in the oxygen evolution reaction (OER) is understanding multiple over- lapping redox transitions in the OER catalysts. The complexity of these transitions obscure the relationship between the coverage of adsorbates and OER kinetics, leading to an experimental challenge in measuring activity descriptors, such as binding energies, as well as adsorbate interactions, which may destabilize intermediates and modulate their binding energies. Herein, we utilize a newly designed optical spectroelectrochemistry system to measure these phenomena in order to contrast the behavior of two electrocatalysts, cobalt oxyhydroxide (CoOOH) and cobalt-iron hexacyanoferrate (cobalt-iron Prussian blue, CoFe-PB). Three distinct optical spectra are observed in each catalyst, corresponding to three separate redox transitions, the last of which we show to be active for the OER using time-resolved spectroscopy and electrochemical mass spectroscopy. By combining predictions from density functional theory with parameters obtained from electroadsorption isotherms, we demonstrate that a destabilization of catalytic intermediates occurs with increasing coverage. In CoOOH, a strong (~0.34 eV/ monolayer) destabilization of a strongly bound catalytic intermediate is observed, leading to a potential offset between the accumulation of the intermediate and measurable O 2 evolution. We contrast these data to CoFe-PB, where catalytic intermediate generation and O 2 evolution onset coincide due to weaker binding and destabilization (~0.19 eV/monolayer). By considering a correlation between activation energy and binding strength, we suggest that such adsorbate driven destabilization may account for a significant fraction of the observed OER catalytic activity in both materials. Finally, we disentangle the effects of adsorbate interactions on state coverages and kinetics to show how adsorbate interactions determine the observed Tafel slopes. Crucially, the case of CoFe-PB shows that, even where interactions are weaker, adsorption remains non-Nernstian, which strongly influences the observed Tafel slope.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Exploring the mobility of Cu in bimetallic nanocrystals to promote atomic-scale transformations under a reactive gas environment

Bimetallic nanocrystals (NCs) often show improved catalytic activities compared to their monometallic counterparts, but to optimize the performance it is crucial to understand how they behave under actual reaction conditions, i.e. in gas environments. Here, in this study, we use powder X-ray diffraction (PXRD), total scattering (TS) with pair distribution function (PDF) analysis and in situ high-resolution transmission electron microscopy (HR-TEM) to provide new insights into the atomic-scale behaviour of NC catalysts under a reactive gas environment. By investigating Au, Cu, Pd, PdCu, AuPd and AuCu NCs, we observe that the properties of bimetallic NCs differ significantly from their monometallic counterparts. While metal oxide phases formed for monometallic Pd and Cu under O 2 -exposure, bimetallic PdCu and AuCu NCs showed loss of metallic Cu in the crystalline phases after exposure to O 2 . However, upon introducing the bimetallic NCs to a reducing atmosphere, the Cu was found to reappear and reincorporate into a crystalline phase, forming the initial bimetallic structures. By combining TS, PDF analysis and in situ HR-TEM, we saw that Cu segregates to the NC surfaces or forms small CuO domains under O 2 -exposure. Our results thus indicate that the Cu mobility promotes segregation and formation of CuO along with the formation of a monometallic phase, which ultimately changes the resulting active surface sites of the nanocatalyst. Understanding the dynamical structure–property relations of nanocatalysts is key to enable rational design of efficient and robust catalysts for controlled catalytic reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Chemical Insights into the Formation of Colloidal Iridium Nanoparticles from In Situ X-ray Total Scattering: Influence of Precursors and Cations on the Reaction Pathway

Iridium nanoparticles are important catalysts for several chemical and energy conversion reactions. Studies of iridium nanoparticles have also been a key for the development of kinetic models of nanomaterial formation. However, compared to other metals such as gold or platinum, knowledge on the nature of prenucleation species and structural insights into the resultant nanoparticles are missing, especially for nanoparticles obtained from Ir$_x$Cl$_y$ precursors investigated here. We use in situ X-ray total scattering (TS) experiments with pair distribution function (PDF) analysis to study a simple, surfactant-free synthesis of colloidal iridium nanoparticles. The reaction is performed in methanol at 50 °C with only a base and an iridium salt as precursor. From different precursor salts–IrCl 3 , IrCl 4 , H 2 IrCl 6 , or Na 2 IrCl 6 –colloidal nanoparticles as small as Ir ~55 are obtained as the final product. The nanoparticles do not show the bulk iridium face-centered cubic ($fcc$) structure but show decahedral and icosahedral structures. The formation route is highly dependent on the precursor salt used. Using IrCl 3 or IrCl 4 , metallic iridium nanoparticles form rapidly from Ir$_x$Cl$_y$$^{n–}$ complexes, whereas using H 2 IrCl 6 or Na 2 IrCl 6 , the iridium nanoparticle formation follows a sudden growth after an induction period and the brief appearance of a crystalline phase. With H 2 IrCl 6 , the formation of different Ir$_n$ ($n$ = 55, 55, 85, and 116) nanoparticles depends on the nature of the cation in the base (LiOH, NaOH, KOH, or CsOH, respectively) and larger particles are obtained with larger cations. As the particles grow, the nanoparticle structure changes from partly icosahedral to decahedral. In conclusion, the results show that the synthesis of iridium nanoparticles from Ir$_x$Cl$_y$ is a valuable iridium nanoparticle model system, which can provide new compositional and structural insights into iridium nanoparticle formation and growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Free energy difference to create the M-OH* intermediate of the oxygen evolution reaction by time-resolved optical spectroscopy

Theoretical descriptors differentiate the catalytic activity of materials for the oxygen evolution reaction by the strength of oxygen binding in the reactive intermediate created upon electron transfer. Recently, time-resolved spectroscopy of a photo-electrochemically driven oxygen evolution reaction followed the vibrational and optical spectra of this intermediate, denoted M-OH*. However, these inherently kinetic experiments have not been connected to the relevant thermodynamic quantities. Here we discover that picosecond optical spectra of the Ti-OH* population on lightly doped SrTiO 3 are ordered by the surface hydroxylation. A Langmuir isotherm as a function of pH extracts an effective equilibrium constant relatable to the free energy difference of the first oxygen evolution reaction step. Thus, time-resolved spectroscopy of the catalytic surface reveals both kinetic and energetic information of elementary reaction steps, which provides a critical new connection between theory and experiment by which to tailor the pathway of water oxidation and other surface reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Chemisorbed oxygen or surface oxides steer the selectivity in Pd electrocatalytic propene oxidation observed by operando Pd L-edge X-ray absorption spectroscopy

Controlled electrochemical oxidation of hydrocarbons to desired products is an attractive approach in catalysis. Here we study the electrochemical propene oxidation under operando conditions using Pd L-edge X-ray absorption spectroscopy (XAS) as a sensitive probe to elucidate surface processes occurring during catalysis. Together with ab initio multiple-scattering calculations, our XAS results enable assignment of characteristic changes of the Pd L-edge intensity and energy position in terms of a mechanistic understanding of the selective oxidation of propene. The results, supported by electrochemical density functional theory DFT simulations, show that in the potential range of 0.8–1.0 V vs. the reversible hydrogen electrode (RHE), selective oxidation of propene to acrolein and acrylic acid occurs on the metallic Pd surface. Here, these reactions are proposed to proceed via the Langmuir–Hinshelwood mechanism. In contrast, for the potential range of 1.1–1.3 V vs. RHE, selective oxidation of propene to propylene glycol takes place on a Pd oxide surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

P-block single-metal-site tin/nitrogen-doped carbon fuel cell cathode catalyst for oxygen reduction reaction

This contribution reports the discovery and analysis of a p-block Sn-based catalyst for the electroreduction of molecular oxygen in acidic conditions at fuel cell cathodes; the catalyst is free of platinum-group metals and contains single-metal-atom actives sites coordinated by nitrogen. The prepared SnNC catalysts meet and exceed state-of-the-art FeNC catalysts in terms of intrinsic catalytic turn-over frequency and hydrogen–air fuel cell power density. The SnNC-NH 3 catalysts displayed a 40–50% higher current density than FeNC-NH 3 at cell voltages below 0.7 V. Additional benefits include a highly favourable selectivity for the four-electron reduction pathway and a Fenton-inactive character of Sn. Here, a range of analytical techniques combined with density functional theory calculations indicate that stannic Sn(iv)Nx single-metal sites with moderate oxygen chemisorption properties and low pyridinic N coordination numbers act as catalytically active moieties. The superior proton-exchange membrane fuel cell performance of SnNC cathode catalysts under realistic, hydrogen–air fuel cell conditions, particularly after NH 3 activation treatment, makes them a promising alternative to today’s state-of-the-art Fe-based catalysts.

25 ENERGY STORAGE↗
DOE OSTI2019

Ligand-Dependent Energetics for Dehydrogenation: Implications in Li-Ion Battery Electrolyte Stability and Selective Oxidation Catalysis of Hydrogen-Containing Molecules

The hydrogen adsorption energetics on the surface of inorganic compounds can be used to predict electrolyte stability in Li-ion batteries and catalytic activity for selective oxidation of small molecules such as H 2 and CH 4 . Using first-principles density functional theory (DFT), the hydrogen adsorption was found to be unfavorable on high-band-gap insulators, which could be attributed to a lower energy level associated with adsorbed hydrogen relative to the bottom of the conduction band. In contrast, the hydrogen adsorption was shown to be the most favorable on metallic and semiconducting compounds, which results from an electron transfer from adsorbed hydrogen to the Fermi level or the bottom of the conduction band. Of significance, computed hydrogen adsorption energetics on insulating, semiconducting, and metallic oxides; phosphates; fluorides; and sulfides were decreased by lowering the ligand p band center, while the energy penalty for ligand vacancy formation was increased, indicative of decreased surface reducibility. A statistical regression analysis, where 16 structural and electronic parameters such as metal–ligand distance, electronegativity difference, Bader charges, bulk and surface metal and ligand band centers, band gap, ligand band width, and work function were examined, further showed that the surface ligand p band center is the most accurate single descriptor that governs the hydrogen adsorption tendency, and additional considerations of the band gap and average metal–ligand distance further reconcile the differences among compounds with different ligands/structures, whose ligand bands are different in shape and width. We discuss the implications of these findings for passivating coatings and design of catalysts and the need for novel theoretical methods to accurately estimate these quantities from first principles. Furthermore, these results establish a universal design principle for future high-throughput studies aiming to design electrode surfaces to minimize electrolyte oxidation by dehydrogenation in Li-ion batteries and enhance the H–H and C–H activation for selective oxidation catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Electrochemical CO Reduction: A Property of the Electrochemical Interface

Electrochemical CO reduction holds the promise to be a cornerstone for sustainable production of fuels and chemicals. However, the underlying understanding of the carbon–carbon coupling toward multiple-carbon products is not complete. Here we present thermodynamically realistic structures of the electrochemical interfaces, determined by explicit ab initio simulations. We investigate how key CO reduction reaction intermediates are stabilized in different electrolytes and at different pH values. We find that the catalytic trends previously observed experimentally can be explained by the interplay between the metal surface and the electrolyte. For the Cu(100) facet with a phosphate buffer electrolyte, the energy efficiency is found to be limited by blocking of a phosphate anion, while in alkali hydroxide solutions (MOH, M = Na, K, Cs), OH* intermediates may be present, and at high overpotential the H* coverage limits the reaction. Furthermore the results provide insight into the electrochemical interface structure, revealing the limitations for multiple-carbon products, and offer a direct comparison to experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Active-Phase Formation and Stability of Gd/Pt(111) Electrocatalysts for Oxygen Reduction: An In Situ Grazing Incidence X-Ray Diffraction Study

Alloys of platinum and gadolinium present significant activity enhancement over pure Pt for the oxygen reduction reaction (ORR), both in the form of extended electrode surfaces and nanoparticulate catalysts. The active phase consists of a compressed Pt overlayer formed on Pt 5 Gd electrodes upon exposure to the electrolyte by acid leaching. Here, we investigate the formation, strain and correlation lengths of the active Pt overlayer by using in situ synchrotron grazing incidence X–ray diffraction on Gd/Pt(111) single–crystalline electrodes. The overlayer forms upon exposure to electrolyte under open circuit conditions; the compressive strain relaxes slightly upon repeated electrochemical cycling in the potential range 0.6 to 1.0 V versus the reversible hydrogen electrode (RHE). Furthermore, the strain relaxes strongly when exposing the electrode to 1.2 V versus RHE, and the thickness of the crystalline portion of the overlayer increases with potential above 1.3 V versus RHE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Electrocatalytic transformation of HF impurity to H 2 and LiF in lithium-ion batteries

The formation of solid electrolyte interphase on graphite anodes plays a key role in the efficiency of Li-ion batteries. However, to date, fundamental understanding of the formation of LiF as one of the main solid electrolyte interphase components in hexafluorophosphate-based electrolytes remains elusive. In this paper, we present experimental and theoretical evidence that LiF formation is an electrocatalytic process that is controlled by the electrochemical transformation of HF impurity to LiF and H 2 . Although the kinetics of HF dissociation and the concomitant production of LiF and H 2 is dependent on the structure and nature of surface atoms, the underlying electrochemistry is the same. The morphology, and thus the role, of the LiF formed is strongly dependent on the nature of the substrate and HF inventory, leading to either complete or partial passivation of the interface. Finally, our finding is of general importance and may lead to new opportunities for the improvement of existing, and design of new, Li-ion technologies.

25 ENERGY STORAGE↗
DOE OSTI2017

Towards identifying the active sites on RuO 2 (110) in catalyzing oxygen evolution

While the surface atomic structure of RuO 2 has been well studied in ultra high vacuum, much less is known about the interaction between water and RuO 2 in aqueous solution. In this work, in situ surface X-ray scattering measurements combined with density functional theory (DFT) were used to determine the surface structural changes on single-crystal RuO2(110) as a function of potential in acidic electrolyte. The redox peaks at 0.7, 1.1 and 1.4 V vs. reversible hydrogen electrode (RHE) could be attributed to surface transitions associated with the successive deprotonation of –H 2 O on the coordinatively unsaturated Ru sites (CUS) and hydrogen adsorbed to the bridging oxygen sites. At potentials relevant to the oxygen evolution reaction (OER), an –OO species on the Ru CUS sites was detected, which was stabilized by a neighboring –OH group on the Ru CUS or bridge site. Combining potential-dependent surface structures with their energetics from DFT led to a new OER pathway, where the deprotonation of the –OH group used to stabilize –OO was found to be rate-limiting.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Importance of Surface IrO x in Stabilizing RuO 2 for Oxygen Evolution

The high precious metal loading and high overpotential of the oxygen evolution reaction (OER) prevents the widespread utilization of polymer electrolyte membrane (PEM) water electrolyzers. In this paper, we explore the OER activity and stability in acidic electrolyte of a combined IrO x /RuO 2 system consisting of RuO 2 thin films with submonolayer (1, 2, and 4 Å) amounts of IrO x deposited on top. Operando extended X-ray absorption fine structure (EXAFS) on the Ir L-3 edge revealed a rutile type IrO 2 structure with some Ir sites occupied by Ru, IrO x being at the surface of the RuO 2 thin film. We monitor corrosion on IrO x /RuO 2 thin films by combining electrochemical quartz crystal microbalance (EQCM) with inductively coupled mass spectrometry (ICP-MS). We elucidate the importance of submonolayer surface IrO x in minimizing Ru dissolution. Finally, our work shows that we can tune the surface properties of active OER catalysts, such as RuO 2 , aiming to achieve higher electrocatalytic stability in PEM electrolyzers.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Operando XAS Study of the Surface Oxidation State on a Monolayer IrO x on RuO x and Ru Oxide Based Nanoparticles for Oxygen Evolution in Acidic Media

Here in this paper we present surface sensitive operando XAS L-edge measurements on IrO x /RuO 2 thin films as well as mass-selected RuO x and Ru nanoparticles. We observed shifts of the white line XAS peak toward higher energies with applied electrochemical potential. Apart from the case of the metallic Ru nanoparticles, the observed potential dependencies were purely core-level shifts caused by a change in oxidation state, which indicates no structural changes. These findings can be explained by different binding energies of oxygenated species on the surface of IrO x and RuO x . Simulated XAS spectra show that the average Ir oxidation state change is strongly affected by the coverage of atomic O. The observed shifts in oxidation state suggest that the surface has a high coverage of O at potentials just below the potential where oxygen evolution is exergonic in free energy. In conclusion, this observation is consistent with the notion that the metal–oxygen bond is stronger than ideal.

36 MATERIALS SCIENCE↗