A frequency-division multiple-access system concept for 30/20 GHz high-capacity domestic satellite service
Previously cited in issue 09, p. 1357, Accession no. A82-23484
Berk, G.↗
Engineering topics
Rotholz, E.
Publications and source records attributed to Rotholz, E..
A frequency-routed satellite system concept using multiple orthogonally-polarized beams for frequency reuse
The design concepts of a multibeam frequency-division multiplexed satellite system accessed by many moderately sized earth stations are outlined. In the system proposed here, traffic is routed from beam to beam through appropriate apportionment and filtering. Within a beam, the routing to particular users is achieved by conventional FDM. The optimum beam size, beam isolation, orthogonal polarization assignment to beams, the concept of beam groups yielding a simple transponder design, and the establishment of a frequency plan providing interference-free band assignments are discussed.
Rotholz, E.↗
On board processing for future satellite communications systems: Comparison of FDM, TDM and hybrid accessing schemes
Several satellite uplink and downlink accessing schemes for customer premises service are compared. Four conceptual system designs are presented: satellite-routed frequency division multiple access (FDMA), satellite-switched time division multiple access (TDMA), processor-routed TDMA, and frequency-routed TDMA, operating in the 30/20 GHz band. The designs are compared on the basis of estimated satellite weight, system capacity, power consumption, and cost. The systems are analyzed for fixed multibeam coverage of the continental United States. Analysis shows that the system capacity is limited by the available satellite resources and by the terminal size and cost.
Berk, G.↗
An FDMA system concept for 30/20 GHz high capacity domestic satellite service
The paper summarizes a feasibility study of a multibeam FDMA satellite system operating in the 30/20 GHz band. The system must accommodate a very high volume of traffic within the restrictions of a 5 kW solar cell array and a 2.5 GHz bandwidth. Multibeam satellite operation reduces the DC power demand and allows reuse of the available bandwidth. Interferences among the beams are brought to acceptable levels by appropriate frequency assignments. A transponder design is presented; it is greatly simplified by the application of a regional concept. System analysis shows that MSK modulation is appropriate for a high-capacity system because it conserves the frequency spectrum. Rain attenuation, a serious problem in this frequency band, is combatted with sufficient power margins and with coding. Link budgets, cost analysis, and weight and power calculations are also discussed. A satellite-routed FDMA system compares favorably in performance and cost with a satellite-switched TDMA system.
Berk, G.↗
Comparative study of FDMA, TDMA and hybrid 30/20 GHz satellite communications systems for small users
This study compares several satellite uplink and downlink accessing schemes for a Customer Premises Service. Four conceptual system designs are presented: Satellite-Routed FDMA, Frequency-Routed TDMA, Satellite-Switched TDMA, and Processor-Routed TDMA, operating in the 30/20 GHz band. The designs are compared on the basis of estimated satellite weight, power consumption, and cost. The system capacities are analyzed for a fixed multibeam coverage of CONUS. Analysis shows that the system capacity is limited by the available satellite resources and by the terminal size and cost.
Berk, G.↗
On-board processing for future satellite communications systems: Satellite-Routed FDMA
A frequency division multiple access (FDMA) 30/20 GHz satellite communications architecture without on-board baseband processing is investigated. Conceptual system designs are suggested for domestic traffic models totaling 4 Gb/s of customer premises service (CPS) traffic and 6 Gb/s of trunking traffic. Emphasis is given to the CPS portion of the system which includes thousands of earth terminals with digital traffic ranging from a single 64 kb/s voice channel to hundreds of channels of voice, data, and video with an aggregate data rate of 33 Mb/s. A unique regional design concept that effectively smooths the non-uniform traffic distribution and greatly simplifies the satellite design is employed. The satellite antenna system forms thirty-two 0.33 deg beam on both the uplinks and the downlinks in one design. In another design matched to a traffic model with more dispersed users, there are twenty-four 0.33 deg beams and twenty-one 0.7 deg beams. Detailed system design techniques show that a single satellite producing approximately 5 kW of dc power is capable of handling at least 75% of the postulated traffic. A detailed cost model of the ground segment and estimated system costs based on current information from manufacturers are presented.
Berk, G.↗