Engineering topics

Rudduck, Roger C.

Publications and source records attributed to Rudduck, Roger C..

5 records

NASA NTRS1993

A doubly periodic moment method solution for the analysis and design of an absorber covered wall

The periodic moment method (PMM) solution for scattering from a doubly periodic array of lossy dielectric bodies is developed in this paper. The purpose of this study is to design electromagnetic wedge and pyramidal absorber for low reflectivity so that one can improve the performance of anechoic chamber measurements. The spectral-domain formulation and the moment method volume polarization current approach are applied to obtain the expressions used to determine the scattering from a doubly periodic array of lossy dielectric bodies. Through these studies, some wedge and pyramidal absorber configurations have been designed, fabricated, and then tested in the OSU/ESL compact range measurement facility. In this paper, wedge absorber, commercial pyramidal absorber, and some low-frequency pyramidal absorber designs are presented. By considering the complexity of dealing with real-world material structures, good agreement between calculations and measurements has been obtained.

Yang, Chang-Fa↗

NASA NTRS1992

A periodic moment method solution for TM scattering from lossy dielectric bodies with application to wedge absorber

The periodic moment method (PMM) solution for the scattering from two-dimensional lossy dielectric bodies is developed in this paper. The purpose is to design microwave wedge absorber for low reflectivity so that one can improve the performance of anechoic chamber measurements. With PMM, the reflection and transmission coefficients of periodically distributed bodies illuminated by a plane wave have been accurately calculated using a Cray Y-MP supercomputer. Through these studies, some wedge absorber configurations have been designed, fabricated, and then tested in the OSU/ESL compact range measurement facility. Two 8 in. commercial wedges, a curved wedge, and a four-layer wedge are studied in this paper. In all cases, good agreement between calculations and measurements has been obtained.

Yang, Chang-Fa↗

NASA NTRS1989

Enhanced imaging of reflector antenna surface distortion using microwave holography

Two signal processing techniques are discussed that improve the accuracy of a microwave holographic measurement by removing unwanted signals from the aperture distribution: pattern simulation and subtraction, and time domain filtering. Pattern simulation and subtraction involves modeling unwanted scattering mechanisms and then removing them from the measured far-field data. Measurements taken on a focal point geometry and a Cassegrain geometry at 11 GHz were processed by the holographic analysis system. Pattern simulation and subtraction was applied to both geometries. Surface deformation profiles generated for the Cassegrain antenna by this system were compared to an optical measurement of the main reflector surface.

Gilmore, Sean W.↗

NASA NTRS1989

A surface distortion analysis applied to the hoop/column deployable mesh reflector antenna

A practical approach is demonstrated for the deterministic analysis of surface distortions in reflector antennas, based on a first-order approximation to the aperture field phase. Measured pattern results from a 15-m-diameter hoop/column deployable mesh reflector antenna are used to demonstrate the accuracy which can be obtained with this surface distortion analysis. The only practical limitation of the first-order approximation is determined by the slope derivations of the distorted surface from the best-fit paraboloid.

Lee, Teh-Hong↗

NASA NTRS1987

A new approach for shaping of dual-reflector antennas

The shaping of 2-D dual-reflector antenna systems to generate a prescribed distribution with uniform phase at the aperture of the second reflector is examined. This method is based on the geometrical nature of Cassegrain and Gregorian dual-reflector antennas. The method of syntheses satisfies the principles of geometrical optics which are the foundations of dual-reflector designs. Instead of setting up differential equations or heuristically designing the subreflector, a set of algebraic equations is formulated and solved numerically to obtain the desired surfaces. The caustics of the reflected rays from the subreflector can be obtained and examined. Several examples of 2-D dual-reflector shaping are shown to validate the study. Geometrical optics and physical optics are used to calculate the scattered fields from the reflectors.

Lee, Teh-Hong↗