Search NASA⌕ Search

Engineering topics

Rumaiz, A. K.

Publications and source records attributed to Rumaiz, A. K..

High spatial resolution direct conversion amorphous selenium X-ray detectors with monolithically integrated CMOS readout

Recent progress in the field of micron-scale spatial resolution direct conversion X-ray detectors for high-energy synchrotron light sources serve applications ranging from nondestructive and noninvasive microscopy techniques which provide insight into the structure and morphology of crystals, to medical diagnostic measurement devices. Amorphous selenium ( a -Se) as a wide-bandgap thermally evaporated photoconductor exhibits ultra-low thermal generation rates for dark carriers and has been extensively used in X-ray medical imaging. Being an amorphous material, it can further be deposited over large areas at room temperatures and at substantially lower costs as compared to crystalline semiconductors. Here, to address the demands for a high-energy and high spatial resolution X-ray detector for synchrotron light source applications, we have thermally evaporated a -Se on a Mixed-Mode Pixel Array Detector (MM-PAD) Application Specific Integrated Circuit (ASIC). The ASIC format consists of 128 × 128 square pixels each 150 μm on a side. A 200 μm a -Se layer was directly deposited on the ASIC followed by a metal top electrode. The completed detector assembly was tested with 45 kV Ag and 23 kV Cu X-ray tube sources. The detector fabrication, performances, Modulation Transfer Function (MTF) measurements, and simulations are reported.

36 MATERIALS SCIENCE↗

A coded aperture microscope for X-ray fluorescence full-field imaging

The design and construction of an instrument for full-field imaging of the X-ray fluorescence emitted by a fully illuminated sample are presented. The aim is to produce an X-ray microscope with a few micrometers spatial resolution, which does not need to scan the sample. Since the fluorescence from a spatially inhomogeneous sample may contain many fluorescence lines, the optic which will provide the magnification of the emissions must be achromatic, i.e. its optical properties must be energy-independent. The only optics which fulfill this requirement in the X-ray regime are mirrors and pinholes. The throughput of a simple pinhole is very low, so the concept of coded apertures is an attractive extension which improves the throughput by having many pinholes, and retains the achromatic property. Modified uniformly redundant arrays (MURAs) with 10 µm openings and 50% open area have been fabricated using gold in a lithographic technique, fabricated on a 1 µm-thick silicon nitride membrane. The gold is 25 µm thick, offering good contrast up to 20 keV. The silicon nitride is transparent down into the soft X-ray region. MURAs with various orders, from 19 up to 73, as well as their respective negative (a mask where open and closed positions are inversed compared with the original mask), have been made. Having both signs of mask will reduce near-field artifacts and make it possible to correct for any lack of contrast.

36 MATERIALS SCIENCE↗

Charge-transfer satellites and chemical bonding in photoemission and x-ray absorption of SrTi O 3 and rutile Ti O 2 : Experiment and first-principles theory with general application to spectroscopic analysis

First-principles, real-time-cumulant, and Bethe-Salpeter-equation calculations fully capture the detailed satellite structure that occurs in response to the sudden creation of the core hole in both photoemission and x-ray absorption spectra of the transition-metal compounds SrTi O 3 and rutile Ti O 2 . Analysis of the excited-state, real-space charge-density fluctuations betrays the physical nature of these many electron excitations that are shown to reflect the materials’ solid-state electronic structure and chemical bonding. This first-principles development of the cumulant-based core hole spectral function is generally applicable to other systems and should become a standard tool for all similar spectroscopic analysis going beyond the quasiparticle physics of the photoelectric effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Core hole processes in x-ray absorption and photoemission by resonant Auger-electron spectroscopy and first-principles theory

Electron–core hole interactions are critical for proper interpretation of core-level spectroscopies commonly used as analytical tools in materials science. Here we utilize resonant Auger-electron spectroscopy to uniquely identify exciton, shake, and charge-transfer processes that result from the sudden creation of the core hole in both x-ray-absorption and photoemission spectra. These effects are captured for the transition-metal compounds SrTiO 3 and MoS 2 by fully ab initio, combined real-time cumulant, and Bethe-Salpeter equation approaches to account for core hole dynamics and screening. Atomic charges and excited-state electron-density fluctuations reflect materials’ solid-state electronic structure, loss of translational symmetry around the core hole, and breakdown of the sudden approximation. They also demonstrate competition between long- and short-range screening in a solid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-Element Germanium Detectors with Integrated Readouts

In this study, we have developed a series of monolithic multi-element germanium detectors coupled with custom developed CMOS application specific integrated circuit (ASIC) for readout. Several strip detectors with element counts ranging from 64 to 384 were developed and are currently used at the National Synchrotron Light Source II in Brookhaven National Laboratory and the Advanced Photon Source in Argonne National Laboratory. Lastly, the detectors are photon counting and are used at high-energy diffraction and energy dispersive diffraction beamlines.

47 OTHER INSTRUMENTATION↗

Revealing excitonic processes and chemical bonding in Mo S 2 by x-ray spectroscopy

Electron core-hole processes at absorption edges sport several signatures, primarily in the form of bound states and/or excitonic enhancement. Here, through analysis of the resonant-Raman Auger effect for the two-dimensional transition-metal dichalcogenide MoS 2 , we demonstrate that these effects have significant manifestations at the S K edge. We characterize two asymmetric excitonically enhanced edges: one at the fundamental band edge and one several electron volts above it following a second band gap that lies entirely within the unoccupied states, with the latter revealing an anomalous postcollision interaction effect. In conclusion, our interpretation is supported by comparison of both the photoemission valence-band spectrum and the S K-edge x-ray-absorption spectrum with electronic structure calculations and an ab initio solution of the Bethe-Salpeter equation that accurately accounts for the electron-core-hole interaction.

47 OTHER INSTRUMENTATION↗

Experimental assignment of many-electron excitations in the photoionization of NiO

The absorption of a photon and the emission of an electron is not a simple, two-particle process. The complicated many-electron features observed during core photoionization can therefore reveal many of the hidden secrets about the ground and excited-state electronic structures of a material. Careful analysis of the photon-energy dependence of the Ni KLL Auger deexcitation spectra at and above the Ni 1s photoionization threshold has identified the satellite structure that appears in both the photoelectron emission and the x-ray absorption spectra of NiO as Ni metal 3d e g → Ni metal 3d e g and O ligand 2p e g → Ni metal 3d e g charge-transfer excitations, respectively. These assignments clarify the conflicting theoretical predictions of the last five decades in addition to other anomalous effects in the spectroscopy of this unique material.

36 MATERIALS SCIENCE↗

Multi-element germanium detectors for synchrotron applications

In this paper, we have developed a series of monolithic multi-element germanium detectors, based on sensor arrays produced by the Forschungzentrum Julich, and on Application-specific integrated circuits (ASICs) developed at Brookhaven. Devices have been made with element counts ranging from 64 to 384. These detectors are being used at NSLS-II and APS for a range of diffraction experiments, both monochromatic and energy-dispersive. Compact and powerful readout systems have been developed, based on the new generation of FPGA system-on-chip devices, which provide closely coupled multi-core processors embedded in large gate arrays. Finally, we will discuss the technical details of the systems, and present some of the results from them.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Loss for photoemission versus gain for Auger: Direct experimental evidence of crystal-field splitting and charge transfer in photoelectron spectroscopy

Here, we find a 5 eV satellite in the Ti1s photoelectron spectrum of the transition-metal oxide SrTiO 3 . This satellite appears in addition to the well-studied 13 eV structure that is typically associated with the Ti2p core line. We give direct experimental evidence that the presence of two satellites is due to the crystal-field splitting of the metal 3d orbitals. They originate from ligand 2pt 2 g → metal3dt 2 g and ligand 2pe g → metal 3de g monopole charge-transfer excitations within the sudden approximation of quantum mechanics. This assignment is made by the energetics of the resonant and high-energy threshold behaviors of the TiK–L 2 L 3 Auger decay that follows Ti1s photoionization.

36 MATERIALS SCIENCE↗

Passivation of In{sub 0.53}Ga{sub 0.47}As/ZrO{sub 2} interfaces by AlN atomic layer deposition process

Reducing defects at III-V/high-k interfaces is essential for optimizing devices built on these materials. Here, the role of an interfacial AlN process at In{sub 0.53}Ga{sub 0.47}As/ZrO{sub 2} interfaces is investigated by hard x-ray photoelectron spectroscopy (HAXPES) and capacitance/voltage (C-V) measurements. C-V measurements show a significant reduction in the density of interface traps with the interfacial AlN process and a capping TiN layer. To elucidate the specific role of the AlN process, blanket films with various deposition processes are compared. The AlN process alone (without subsequent dielectric deposition) reduces InGaAs oxide levels below the HAXPES detection limit, even though the AlN is ultimately found to be oxidized into AlO{sub x} with only trace N incorporation, yet AlN passivation provides a lower D{sub it} (density of interface traps) when compared with an H{sub 2}O-based Al{sub 2}O{sub 3} deposition. The AlN process does not passivate against re-oxidation of the InGaAs during an O{sub 3} based ZrO{sub 2} deposition process, but it does provide passivation against As-As development during subsequent TiN deposition. The role of chemical defects in the C-V characteristics is also discussed.

36 MATERIALS SCIENCE↗