Search NASA⌕ Search

Engineering topics

Russell, D.

Publications and source records attributed to Russell, D..

Interactions of magnetized plasma flows in pulsed-power driven experiments

A supersonic flow of magnetized plasma is produced by the application of a 1 MA-peak, 500 ns current pulse to a cylindrical arrangement of parallel wires, known as an inverse wire array. The plasma flow is produced by the J x B acceleration of the ablated wire material, and a magnetic field of several Tesla is embedded at source by the driving current. This setup has been used for a variety of experiments investigating the interactions of magnetized plasma flows. In experiments designed to investigate magnetic reconnection, the collision of counter-streaming flows, carrying oppositely directed magnetic fields, leads to the formation of a reconnection layer in which we observe ions reaching temperatures much greater than predicted by classical heating mechanisms. The breakup of this layer under the plasmoid instability is dependent on the properties of the inflowing plasma, which can be controlled by the choice of the wire array material. In other experiments, magnetized shocks were formed by placing obstacles in the path of the magnetized plasma flow. The pile-up of magnetic flux in front of a conducting obstacle produces a magnetic precursor acting on upstream electrons at the distance of the ion inertial length. This precursor subsequently develops into a steep density transition via ion-electron fluid decoupling. Obstacles which possess a strong private magnetic field affect the upstream flow over a much greater distance, providing an extended bow shock structure. In the region surrounding the obstacle the magnetic pressure holds off the flow, forming a void of plasma material, analogous to the magnetopause around planetary bodies with self-generated magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion heating and magnetic flux pile-up in a magnetic reconnection experiment with super-Alfvénic plasma inflows

This work presents a magnetic reconnection experiment in which the kinetic, magnetic and thermal properties of the plasma each play an important role in the overall energy balance and structure of the generated reconnection layer. Magnetic reconnection occurs during the interaction of continuous and steady flows of super-Alfvénic, magnetized, aluminum plasma, which collide in a geometry with two-dimensional symmetry, producing a stable and long-lasting reconnection layer. Optical Thomson scattering measurements show that when the layer forms, ions inside the layer are more strongly heated than electrons, reaching temperatures of $T_i \sim \bar Z_e > \sim 300 eV$ – much greater than can be expected from strong shock and viscous heating alone. Later in time, as the plasma density in the layer increases, the electron and ion temperatures are found to equilibrate, and a constant plasma temperature is achieved through a balance of the heating mechanisms and radiative losses of the plasma. Measurements from Faraday rotation polarimetry also indicate the presence of significant magnetic field pile-up occurring at the boundary of the reconnection region, which is consistent with the super-Alfvénic velocity of the inflows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion heating and magnetic flux pile-up in a magnetic reconnection experiment with super-Alfvénic plasma inflows

This work presents a magnetic reconnection experiment in which the kinetic, magnetic and thermal properties of the plasma each play an important role in the overall energy balance and structure of the generated reconnection layer. Magnetic reconnection occurs during the interaction of continuous and steady flows of super-Alfvénic, magnetized, aluminum plasma, which collide in a geometry with two-dimensional symmetry, producing a stable and long-lasting reconnection layer. Optical Thomson scattering measurements show that when the layer forms, ions inside the layer are more strongly heated than electrons, reaching temperatures of T i ~$ \overline{Z}\ $T e ≳300 eV – much greater than can be expected from strong shock and viscous heating alone. Later in time, as the plasma density in the layer increases, the electron and ion temperatures are found to equilibrate, and a constant plasma temperature is achieved through a balance of the heating mechanisms and radiative losses of the plasma. Conclusively, measurements from Faraday rotation polarimetry also indicate the presence of significant magnetic field pile-up occurring at the boundary of the reconnection region, which is consistent with the super-Alfvénic velocity of the inflows

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Overview of NSTX Upgrade initial results and modelling highlights

The National Spherical Torus Experiment (NSTX) has undergone a major upgrade, and the NSTX Upgrade (NSTX-U) Project was completed in the summer of 2015. NSTX-U first plasma was subsequently achieved, diagnostic and control systems have been commissioned, the H-mode accessed, magnetic error fields identified and mitigated, and the first physics research campaign carried out. During ten run weeks of operation, NSTX-U surpassed NSTX record pulse-durations and toroidal fields (TF), and high-performance ~1 MA H-mode plasmas comparable to the best of NSTX have been sustained near and slightly above the n = 1 no-wall stability limit and with H-mode confinement multiplier H 98y,2 above 1. Transport and turbulence studies in L-mode plasmas have identified the coexistence of at least two ion-gyro-scale turbulent micro-instabilities near the same radial location but propagating in opposite (i.e. ion and electron diamagnetic) directions. These modes have the characteristics of ion-temperature gradient and micro-tearing modes, respectively, and the role of these modes in contributing to thermal transport is under active investigation. The new second more tangential neutral beam injection was observed to significantly modify the stability of two types of Alfven eigenmodes. Improvements in offline disruption forecasting were made in the areas of identification of rotating MHD modes and other macroscopic instabilities using the disruption event characterization and forecasting code. Finally, the materials analysis and particle probe was utilized on NSTX-U for the first time and enabled assessments of the correlation between boronized wall conditions and plasma performance. These and other highlights from the first run campaign of NSTX-U are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Overview of NSTX Upgrade Initial Results and Modelling Highlights

The National Spherical Torus Experiment (NSTX) has undergone a major upgrade, and the NSTX Upgrade (NSTX-U) Project was completed in the summer of 2015. NSTX-U first plasma was subsequently achieved, diagnostic and control systems have been commissioned, H-Mode accessed, magnetic error fields identified and mitigated, and the first physics research campaign carried out. During 10 run weeks of operation, NSTX-U surpassed NSTX-record pulse-durations and toroidal fields, and high-performance ~1MA H-mode plasmas comparable to the best of NSTX have been sustained near and slightly above the n=1 no-wall stability limit and with H-mode confinement multiplier H98y2 above 1. Transport and turbulence studies in L-mode plasmas have identified the coexistence of at least two ion-gyro-scale turbulent micro-instabilities near the same radial location but propagating in opposite (i.e. ion and electron diamagnetic) directions. These modes have the characteristics of ion-temperature gradient and micro-tearing modes, respectively, and the role of these modes in contributing to thermal transport is under active investigation. The new second more tangential neutral beam injection was observed to significantly modify the stability of two types of Alfven Eigenmodes. Improvements in offline disruption forecasting were made in the areas of identification of rotating MHD modes and other macroscopic instabilities using the Disruption Event Characterization and Forecasting (DECAF) code. Lastly, the Materials Analysis and Particle Probe (MAPP) was utilized on NSTX-U for the first time and enabled assessments of the correlation between boronized wall conditions and plasma performance. These and other highlights from the first run campaign of NSTX-U are described.

Alfven Eigenmodes↗

Receivers for the Microwave Radiometer on Juno

Six receivers for the MicroWave Radiometer (MWR) are currently under development at JPL. These receivers cover a frequency range of 0.6 to 22 GHz in approximately octave steps, with 4 % bandwidth. For calibration and diagnosis three noise diodes and a Dicke switch are integrated into each receiver. Each receiver is connected to its own antenna which is mounted with its bore sights perpendicular to the spin axis of the spacecraft. As the spacecraft spins at 2 RPM, the antenna field of view scans Jupiter's atmosphere from limb to nadir to limb, measuring microwave emission down to 1000-bar.

microwaves↗

Multiple Raman up-conversion of radiation from pre-existing Langmuir turbulence

Little is known regarding the mechanisms involved in the production of radiation at frequencies which are much higher than the maximum plasma frequency in nonmagnetic plasmas. It is pointed out that radiation at high multiples of the plasma frequency has been observed in laser-pellet experiments, in relativistic beam-plasma interactions, and in low-energy beam-plasma interactions. Radiation at twice the plasma frequency can be produced by coalescence of two Langmuir waves. Another approach is based on radiation near the plasma frequency or its second harmonic, produced by instability or by external sources. Raman scatter from preexisting Langmuir turbulence is permitted repeatedly. At each step such scattering will produce frequency upshifts (anti-Stokes process) and downshifts (Stokes process). The present paper is concerned with this process. Attention is given to equilibrium spectra, analytic approximations, laser-plasma interaction and coherent radiation from relativistic electron beams.

Russell, D.↗

Shock tube and shock wave research; Proceedings of the Eleventh International Symposium, University of Washington, Seattle, Wash., July 11-14, 1977

Papers are presented on the applications of shock-wave technology to the study of hydrodynamics, the use of the pressure-wave machine for charging diesel engines, and measurements of the heat-transfer rate in gas-turbine components. Consideration is given to shock propagation along 90-degree bends, the explosive dissemination of liquids, and rotational and vibrational relaxation behind weak shock waves in water vapor. Shock phenomena associated with expansion flows are described and stratospheric-related research using the shock tube is outlined. Attention is given to shock-wave ignition of magnesium powders, Mach reflection and boundary layers, and transition in the shock-induced unsteady boundary layer on a flat plate. Shock-tube measurements of induction and post-induction rates for low-Btu gas mixtures are presented and shock-initiated ignition in COS-N2O-Ar mixtures is described. Cluster growth rates in supersaturated lead vapor are presented and a study of laser-induced plasma motion in a solenoidal magnetic field is reviewed.

Ahlborn, B.↗

Molecular collisions. 11: Semiclassical approximation to atom-symmetric top rotational excitation

In a paper of this series a distorted wave approximation to the T matrix for atom-symmetric top scattering was developed which is correct to first order in the part of the interaction potential responsible for transitions in the component of rotational angular momentum along the symmetry axis of the top. A semiclassical expression for this T matrix is derived by assuming large values of orbital and rotational angular momentum quantum numbers.

Russell, D.↗

Molecular collisions 21: Semiclassical approximation to atom-symmetric top rotational excitation

A distorted wave approximation to the T matrix for atom-symmetric top scattering was developed. The approximation is correct to first order in the part of the interaction potential responsible for transitions in the component of rotational angular momentum along the symmetry axis of the top. A semiclassical expression for this T matrix is derived by assuming large values of orbital and rotational angular momentum quantum numbers.

Russell, D.↗