Search NASASearch

Engineering topics

Russell, L. D.

Publications and source records attributed to Russell, L. D..

Calorimeter probes for measuring high thermal flux

Expendable, slug-type calorimeter probes were developed for measuring high heat-flux levels of 10-30 kW/sq cm in electric-arc jet facilities. The probes were constructed with thin tungsten caps mounted on Teflon bodies. The temperature of the back surface of the tungsten cap is measured, and its time rate of change gives the steady-state absorbed heat flux as the calorimeter probe heats to destruction when inserted into the arc jet. Design, construction, test, and performance data are presented.

Russell, L. D.

Calorimeter probes for measuring high thermal flux

The paper describes expendable, slug-type calorimeter probes developed for measuring high heat-flux levels of 10-30 kW/sq cm in electric-arc jet facilities. The probes are constructed with thin tungsten caps mounted on Teflon bodies; the temperature of the back surface of the tungsten cap is measured, and its rate of change gives the steady-state, absorbed heat flux as the calorimeter probe heats to destruction when inserted into the arc jet. It is concluded that the simple construction of these probes allows them to be expendable and heated to destruction to obtain a measurable temperature slope at high heating rates.

Russell, L. D.

PVF pyroelectric radiometer

Polyvinylfluoride (PVF) plastic film was found to be a good pyroelectric material. Radiometers using PVF were developed that exhibit high sensitivity and frequency response. Normalized detectivities of greater than 10 to the 8th power cm/Hz/w and responsivities on the order of 100,000 V/W were measured (500 C BB source, 0.1 Hz chopping frequency and 1 Hz bandwidth.)

Russell, L. D.

High intensity heat-pulse source operates without cooling system

Tungsten-iodine quartz lamp with on-off control is mounted at focus of ellipsoidal reflector and shutter is mounted at conjugate focus. Flux sensor monitors lamp and actuates shutter which emits a heat pulse when the radiant flux builds up to requisite level.

Russell, L. D.

Thermodielectric radiometer

Radiometer measures microsecond pulses of radiant flux in the presence of electromagnetic noise. It consists of a charged capacitor that delivers a voltage pulse proportional to the thermally induced depolarization of its polymeric dielectric.

Beam, B. H.

Thermodielectric radiometer.

Thermodielectric radiometer for transient radiant flux short duration pulse measurement, using thermally induced depolarization of polymer film dielectric

Beam, B. H.

Thermodielectric radiometer.

Thermodielectric radiometer for transient radiant flux short duration pulse measurement, using thermally induced depolarization of polymer film dielectric

Beam, B. H.

Method of measuring thermal conductivity of high performance insulation

Method accurately measures the thermal conductivity of high-performance sheet insulation as a discrete function of temperature. It permits measurements to be made at temperature drops of approximately 10 degrees F across the insulation and ensures measurement accuracy by minimizing longitudinal heat losses in the system.

Hyde, E. H.