Search NASA⌕ Search

Engineering topics

Rusydi, Andrivo

Publications and source records attributed to Rusydi, Andrivo.

Giant piezoelectricity in oxide thin films with nanopillar structure

High-performance piezoelectric materials are critical components for electromechanical sensors and actuators. For more than 60 years, the main strategy for obtaining large piezoelectric response has been to construct multiphase boundaries, where nanoscale domains with local structural and polar heterogeneity are formed, by tuning complex chemical compositions. We used a different strategy to emulate such local heterogeneity by forming nanopillar regions in perovskite oxide thin films. We obtained a giant effective piezoelectric coefficient d 33 , f * of ~1098 picometers per volt with a high Curie temperature of ~450°C. Our lead-free composition of sodium-deficient sodium niobate contains only three elements (Na, Nb, and O). The formation of local heterogeneity with nanopillars in the perovskite structure could be the basis for a general approach to designing and optimizing various functional materials.

Science & Technology - Other Topics↗

Solar-driven efficient methane catalytic oxidation over epitaxial ZnO/La 0.8 Sr 0.2 CoO 3 heterojunctions

Gas flaring in oil/gas drilling and gas leakage in natural gas power plant lead to significant energy loss and environmental burden. Here, solar-driven efficient methane oxidation was demonstrated under high velocity continuous flow over the ZnO/La 0.8 Sr 0.2 CoO 3 (ZnO/LSCO) heterojunctions. The ZnO/LSCO heterojunctions enable a unique epitaxial hetero-interface, which effectively regulates the electron transfer between Zn 3d -O 2p hybrid orbital in ZnO and Co e g orbital in LSCO and promotes the rapid generation and refill of oxygen vacancy with unpaired electron (V o ), thus enhancing the activity and mobility of surface lattice oxygen in ZnO/LSCO. Under solar illumination, the synergy of photothermal and photocatalytic effect boosts the reversible electron transfer in the interface, which further activates surface lattice oxygen, resulting in a ~2 times higher methane oxidation activity. Such a solar-driven system not only enables a promising pathway for emitted methane utilization, but also provides an advanced catalyst design concept of epitaxial interface construction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical Properties of Bacteriorhodopsin–Gold Bionano Interfaces

Monolayers of different mutants of bacteriorhodopsin (bR) with purple membranes are deposited on gold (Au) substrates. Optical measurements and density functional theory-based electronic structure calculations are reported for the first time for the bR chromophore, which is the retinal protonated Schiff base. The dielectric function of the chromophore is extracted using spectroscopic ellipsometry. Designed mutants of bR are used to investigate the bonding with the gold substrate and bR–Au bonding changes can be tracked using the optical properties of the retinal fragment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Bifunctional Oxygen Electrocatalysts by Changing the A-Site Rare-Earth Element in Perovskite Nickelates

Perovskite-structured (ABO 3 ) transition metal oxides are promising bifunctional electrocatalysts for efficient oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). In this paper, we investigate a set of epitaxial rare earth nickelates (RNiO 3 ) thin films with controlled A-site isovalent substitution to correlate their structure and physical properties with ORR/OER activities. The ORR activity is shown to decrease monotonically with decreasing the A-site element ionic radius which lowers the conductivity of the RNiO 3 (R = La, La 0.5 Nd 0.5 , La 0.2 Nd 0.8 , Nd, Nd 0.5 Sm 0.5 , Sm, Gd) films, with LaNiO 3 being the most conductive and active. On the other hand, the OER activity initially increases upon substituting La with Nd and is maximal at La 0.2 Nd 0.8 NiO 3 , in which oxygen vacancies (VOs) start to form. Moreover, the OER activity remains comparable within error through Sm-doped NdNiO 3 . Beyond that, we cannot reliably measure activity due to the potential voltage drop across the film. The improved OER activity is ascribed to the partial reduction of Ni 3+ to Ni 2+ as a result of VOs, which increases the average occupancy of the e g antibonding orbital to more than one. Our work highlights the importance of tuning A-site elements as an effective strategy for balancing the ORR and OER activities of bifunctional electrocatalysts.

36 MATERIALS SCIENCE↗

Enhancing ferroelectric photovoltaic effect by polar order engineering

Ferroelectric materials for photovoltaics have sparked great interest because of their switchable photoelectric responses and above-bandgap photovoltages that violate conventional photovoltaic theory. However, their relatively low photocurrent and power conversion efficiency limit their potential application in solar cells. To improve performance, conventional strategies focus mainly on narrowing the bandgap to better match the solar spectrum, leaving the fundamental connection between polar order and photovoltaic effect largely overlooked. We report large photovoltaic enhancement by A-site substitutions in a model ferroelectric photovoltaic material, BiFeO 3 . As revealed by optical measurements and supported by theoretical calculations, the enhancement is accompanied by the chemically driven rotational instability of the polarization, which, in turn, affects the charge transfer at the band edges and drives a direct-to-indirect bandgap transition, highlighting the strong coupling between polarization, lattice, and orbital order parameters in ferroelectrics. In conclusion, polar order engineering thus provides an additional degree of freedom to further boost photovoltaic efficiency in ferroelectrics and related materials.

36 MATERIALS SCIENCE↗

Tunable and low-loss correlated plasmons in Mott-like insulating oxides

Plasmonics has attracted tremendous interests for its ability to confine light into subwavelength dimensions, creating novel devices with unprecedented functionalities. New plasmonic materials are actively being searched, especially those with tunable plasmons and low loss in the visible–ultraviolet range. Such plasmons commonly occur in metals, but many metals have high plasmonic loss in the optical range, a main issue in current plasmonic research. Here, we discover an anomalous form of tunable correlated plasmons in a Mott-like insulating oxide from the Sr 1-x Nb 1-y O 3+δ family. These correlated plasmons have multiple plasmon frequencies and low loss in the visible–ultraviolet range. Supported by theoretical calculations, these plasmons arise from the nanometre-spaced confinement of extra oxygen planes that enhances the unscreened Coulomb interactions among charges. The correlated plasmons are tunable: they diminish as extra oxygen plane density or film thickness decreases. Our results open a path for plasmonics research in previously untapped insulating and strongly-correlated materials.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Polarity enhancement in high oriented ZnO films on Si (100) substrate

Zinc oxide films with hexagonal crystal structures have been grown on Si substrate (100) using the DC-unbalanced magnetron sputtering at temperature of 300°C with growth time variation. The films have been characterized using X-Ray Diffraction and Fourier Transform Infrared measurement to show the crystal parameter and atomic bonding. The results show that the films have a dominant orientation in the hkl plane (002), while peak positions are shift to lower diffraction angle with addition of growth time. In addition, the bonding between Zn and O atoms (Zn-O) tend to be weaker as indicated by transmittance peak shifting to lower energy. The weakening of Zn-O bonding is due to the contribution of addition of bond length. These conditions make the films tend to have a high polarity. Further analysis of these studies will bring us to have a good undestanding to explain the ferroelectric properties of the ZnO films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dielectric constant extraction of graphene nanostructured on SiC substrates from spectroscopy ellipsometry measurement using Gauss–Newton inversion method

The extraction of the dielectric constant of nanostructured graphene on SiC substrates from spectroscopy ellipsometry measurement using the Gauss-Newton inversion (GNI) method has been done. This study aims to calculate the dielectric constant and refractive index of graphene by extracting the value of ψ and Δ from the spectroscopy ellipsometry measurement using GNI method and comparing them with previous result which was extracted using Drude-Lorentz (DL) model. The results show that GNI method can be used to calculate the dielectric constant and refractive index of nanostructured graphene on SiC substratesmore faster as compared to DL model. Moreover, the imaginary part of the dielectric constant values and coefficient of extinction drastically increases at 4.5 eV similar to that of extracted using known DL fitting. The increase is known due to the process of interband transition and the interaction between the electrons and electron-hole at M-points in the Brillouin zone of graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Ta concentration on the refractive index of TiO{sub 2}:Ta studied by spectroscopic ellipsometry

We have investigated optical properties of Ta-doped TiO{sub 2} thin film on LaAlO{sub 3} (LAO) substrate using Spectroscopic Ellipsometry (SE) at room temperature. Amplitude ratio Ψ and phase difference L1 between p- and s- polarized light waves are obtained by multiple incident angles measurement (60°, 70°, and 80°) at energy range of 0.5 – 6.5 eV. In order to obtain optical properties for every Ta concentrations (0.01, 0.4, and 5 at. %), multilayer modelling was performed simultaneously by using Drude-Lorentz model. Refractive index and optical dispersion parameters were determined by Wemple-DiDomenico relation. In general, refractive index at zero photon energy n(0) increases by increasing Ta concentration. Furthermore, optical band gap shows a significant increasing due to presence of Ta dopant. In addition, other optical constants are discussed as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of tight-binding based GW algorithm and its computational implementation for graphene

Graphene has been a hot subject of research in the last decade as it holds a promise for various applications. One interesting issue is whether or not graphene should be classified into a strongly or weakly correlated system, as the optical properties may change upon several factors, such as the substrate, voltage bias, adatoms, etc. As the Coulomb repulsive interactions among electrons can generate the correlation effects that may modify the single-particle spectra (density of states) and the two-particle spectra (optical conductivity) of graphene, we aim to explore such interactions in this study. The understanding of such correlation effects is important because eventually they play an important role in inducing the effective attractive interactions between electrons and holes that bind them into excitons. We do this study theoretically by developing a GW method implemented on the basis of the tight-binding (TB) model Hamiltonian. Unlike the well-known GW method developed within density functional theory (DFT) framework, our TB-based GW implementation may serve as an alternative technique suitable for systems which Hamiltonian is to be constructed through a tight-binding based or similar models. This study includes theoretical formulation of the Green’s function G, the renormalized interaction function W from random phase approximation (RPA), and the corresponding self energy derived from Feynman diagrams, as well as the development of the algorithm to compute those quantities. As an evaluation of the method, we perform calculations of the density of states and the optical conductivity of graphene, and analyze the results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Room temperature analysis of dielectric function of ZnO-based thin film on fused quartz substrate

A set of sample consist of pure ZnO and Cu-doped ZnO film were grown on fused-quartz substrates using pulsed laser deposition (PLD) technique. Here, we report room temperature spectroscopic ellipsometry analysis (covering energy range of 0.5 to 6.3 eV) of pure ZnO film and Cu doped ZnO film at 8 in at. %. The thickness of pure ZnO and Cu-doped ZnO film using in this study is about 350 nm. To extract the dielectric function of ZnO thin film, multilayer modeling is performed which takes into account reflections at each interface through Fresnel coefficients. This method based on Drude-Lorentz models that connect with Kramers-Kronig relations. The best fitting of Ψ (amplitude ratio) and Δ (phase difference) taken by SE measurement are obtained reasonably well by mean the universal fitting of three different photon incident angles. The imaginary part of dielectric function (ε{sub 2}) show the broad peak at around 3.3 eV assigned as combination of optical band energy edge with excitonic states. The exitonic states could not be observed clearly in this stage. The evolution of extracted dielectric function is observable by introducing 8% Cu as indicated by decreasing of excitonic intensity. This result indicates the screening of excitonic state. This study will bring us to have a good undestanding for the role of Cu impurities for ZnO thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties analysis of Ta-doped TiO{sub 2} thin films on LaAlO{sub 3} substrates

We study optical properties of Ta-doped TiO{sub 2} thin film on LaAlO{sub 3} substrate using spectroscopy ellipsometry (SE) analysis at energy range of 0.5 – 6.5 eV. Room temperature SE data for Ψ (amplitude ratio) and Δ (phase difference) between p- and s- polarized light waves are taken with multiple incident angles at several spots on the samples. Here, absorption coefficient has been extracted from SE measurements at photon incident angle of 70° for different Ta concentration (0.01, 0.4, and 5 at. %). Multilayer modelling is performed which takes into account reflections at each interface through Fresnel coefficients to obtain reasonably well the fitting of Ψ and Δ data simultaneously. As the results, we estimate that film thickness increases by increasing Ta concentration accompanied by the formation of a new electronic structure. By increasing Ta impurities, the blueshift of absorption coefficient (α) peaks is observable. This result indicates that TiO{sub 2} thin film becomes optically resistive by introducing Ta doping. Schematic model of interband transition inTiO{sub 2}:Ta will be proposed base on obtained optical properties. This study enables us to predict the role of Ta doping on the electronic and optical band structures of TiO{sub 2} thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interplay of Cu and oxygen vacancy in optical transitions and screening of excitons in ZnO:Cu films

We study room temperature optics and electronic structures of ZnO:Cu films as a function of Cu concentration using a combination of spectroscopic ellipsometry, photoluminescence, and ultraviolet-visible absorption spectroscopy. Mid-gap optical states, interband transitions, and excitons are observed and distinguishable. We argue that the mid-gap states are originated from interactions of Cu and oxygen vacancy (Vo). They are located below conduction band (Zn4s) and above valence band (O2p) promoting strong green emission and narrowing optical band gap. Excitonic states are screened and its intensities decrease upon Cu doping. Our results show the importance of Cu and Vo driving the electronic structures and optical transitions in ZnO:Cu films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-stage orbital order and dynamical spin frustration in KCuF3

The orbital degree of freedom is integral to many exotic phenomenain condensed matter, including colossal magnetoresistance and unconventional superconductivity. The standard model of orbital physics is the Kugel–Khomskii model, which first explained the symmetry of orbital and magnetic order in KCuF 3 and has since been applied to virtually all orbitally active materials. Here we present Raman and X-ray scattering measurements showing that KCuF 3 exhibits a previously unidentified structural phase transition at T=50 K, involving rotations of the CuF 6 octahedra. These rotations are quasi-ordered and exhibit glassy hysteresis, but serve to stabilize Néel spin order at T=39 K. Here, we propose an explanation for these effects by supplementing the Kugel–Khomskii model with a direct, orbital exchange term that is driven by a combination of electron–electron interactions and ligand distortions. The effect of this term is to create a near degeneracy that dynamically frustrates the spin subsystem but is lifted at low temperature by subdominant, orbital–lattice interactions. Our results suggest that direct orbital exchange may be crucial for the physics of many orbitally active materials, including manganites, ruthenates and the iron pnictides.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mutual Ferromagnetic-Ferroelectric Coupling in Multiferroic Copper-Doped ZnO

A mutual ferromagnetic and ferroelectric coupling (multiferroic behavior) in Cu-doped ZnO is demonstrated via deterministic control of Cu doping and defect engineering. The coexistence of multivalence Cu ions and oxygen vacancies is important to multiferroic behaviors in ZnO:Cu. The samples show clear ferroelectric and ferromagnetic domain patterns. These domain structures may be written reversibly via electric and magnetic bias.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗