Effect of strain on the band gap of monolayer MoS 2
Not Available
Sah, Raj K. (ORCID:0000000168334574)↗
Engineering topics
Ruzsinszky, Adrienn
Publications and source records attributed to Ruzsinszky, Adrienn.
Efficient simulations of charge density waves in the transition metal Dichalcogenide TiSe 2
Charge density waves (CDWs) in transition metal dichalcogenides are the subject of growing scientific interest due to their rich interplay with exotic phases of matter and their potential technological applications. Here, using density functional theory with advanced meta-generalized gradient approximations (meta-GGAs) and linear response time-dependent density functional theory (TDDFT) with state-of-the-art exchange-correlation kernels, we investigate the electronic, vibrational, and optical properties in 1T-TiSe 2 with and without CDW. In both bulk and monolayer TiSe 2 , the electronic bands and phonon dispersions in either normal or CDW (semiconducting) phase are described well via meta-GGAs, which separate the valence and conduction bands just as HSE06 does but with significantly more computational feasibility. The experimentally observed humps of electron energy loss spectroscopy are successfully reproduced in TDDFT. Our work opens the door to simulating these complexities in CDW compounds from first principles by revealing meta-GGAs as an accurate low-cost alternative to HSE06.
Electronic properties and materials↗
Comparing first-principles density functionals plus corrections for the lattice dynamics of YBa 2 Cu 3 O 6
The enigmatic mechanism underlying unconventional high-temperature superconductivity, especially the role of lattice dynamics, has remained a subject of debate. Theoretical insights have long been hindered due to the lack of an accurate first-principles description of the lattice dynamics of cuprates. Recently, using the r2SCAN meta-generalized gradient approximation (meta-GGA) functional, we have been able to achieve accurate phonon spectra of an insulating cuprate YBa 2 Cu 3 O 6 and discover significant magnetoelastic coupling in experimentally interesting Cu–O bond stretching optical modes [Ning et al., Phys. Rev. B 107, 045126 (2023)]. We extend this work by comparing Perdew–Burke–Ernzerhof and r2SCAN performances with corrections from the on-site Hubbard U and the D4 van der Waals (vdW) methods, aiming at further understanding on both the materials science side and the density functional side. We demonstrate the importance of vdW and self-interaction corrections for accurate first-principles YBa 2 Cu 3 O 6 lattice dynamics. Since r2SCAN by itself partially accounts for these effects, the good performance of r2SCAN is now more fully explained. Finally, in addition, the performances of the Tao–Mo series of meta-GGAs, which are constructed in a different way from the strongly constrained and appropriately normed (SCAN) meta-GGA and its revised version r2SCAN, are also compared and discussed.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Optoelectronic properties of bent two-dimensional materials from first-principles methods combined with machine learning
A material’s interaction with light is highly relevant in the design of nanoelectronic devices such as photodiodes, solar cells, photocatalytic cells, phototransistors, and photodetectors. The interaction of a material with light can be altered by mechanical deformation. Fine tuning of the optical properties can be achieved by mechanical bending that alters the electronic structure. Optical properties strongly depend on band gaps, therefore any alteration in the band structure results in a changed optical response of the material. The impact of bending was explored in this project. The goal of this project was to assess the impact of mechanical bending of two-dimensional transition metal dichalcogenides on their optoelectronic properties, using first-principles methods. These first-principles approximations are largely built upon many-body theory for the optical properties of magnetic and topological nanoribbons. GW-BSE is standard for optical absorption, but it is less practical for collective excitations as it was shown in model systems. Time-dependent density functional theory, however, has better promises for collective excitations in low-dimensional materials.
36 MATERIALS SCIENCE↗
Revealing quasi-excitations in the low-density homogeneous electron gas with model exchange–correlation kernels
Time-dependent density functional theory within the linear response regime provides a solid mathematical framework to capture excitations. The accuracy of the theory, however, largely depends on the approximations for the exchange–correlation (xc) kernels. Away from the long-wavelength (or q = 0 short wave-vector) and zero-frequency (ω = 0) limit, the correlation contribution to the kernel becomes more relevant and dominant over exchange. The dielectric function, in principle, can encompass xc effects relevant to describe low-density physics. Furthermore, besides collective plasmon excitations, the dielectric function can reveal collective electron–hole excitations, often dubbed “ghost excitons.” Besides collective excitons, the physics of the low-density regime is rich, as exemplified by a static charge-density wave that was recently found for r s > 69, and was shown to be associated with softening of the plasmon mode. These excitations are seen to be present in much higher density 2D homogeneous electron gases of r s ≳ 4. Here, in this work, we perform a thorough analysis with xc model kernels for excitations of various nature. The uniform electron gas, as a useful model of real metallic systems, is used as a platform for our analysis. We highlight the relevance of exact constraints as we display and explain screening and excitations in the low-density region.
36 MATERIALS SCIENCE↗
Defect-induced states, defect-induced phase transition, and excitonic states in bent tungsten disulfide (WS 2 ) nanoribbons: Density functional vs. many body theory
Two-dimensional (2D) transition metal dichalcogenide (TMD) materials have versatile electronic and optical properties. TMD nanoribbons exhibit interesting properties due to reduced dimensionality, quantum confinement, and edge states, which make them suitable for various electronic and optoelectronic applications. In a previous work conducted by our group, we demonstrated that the edge bands evolved with bending can tune the optical properties for various widths of TMD nanoribbons. Defects are commonly present in 2D TMD materials, and can dramatically change the material properties. Here, in this following work, we investigate the interaction between the edge and the defect states in tungsten disulfide (WS 2 ) nanoribbons with lines of W- or S-atom vacancies defects under different bending conditions, using density functional theory (DFT). To gain understanding about the limits of density functional approximations, we compare results on band gaps and energies of defect states with quasiparticle GW. We reveal interesting semiconductor-metal phase transitions, suggesting potential applications in nanoelectronics or molecular electronics. We also calculate the optical absorption of the bent and defective nanoribbons with the many-body GW-BSE (Bethe-Salpeter equation) approach, revealing a tunable optical spectrum and diverse exciton states in the defective WS 2 nanoribbons.
36 MATERIALS SCIENCE↗
Bending effects and optical properties of WSe 2 nanoribbons of topological phase
A WSe 2 monolayer of 1T' phase is a large band gap quantum spin Hall insulator, supporting dissipationless charge and spin transports through the topologically protected edge states. Here, in this work, we explore the nanoribbon forms of 1T' phase WSe 2 by first-principles density functional calculations and the many-body perturbation GW and Bethe-Salpeter equation method. We found that the 1T' WSe 2 nanoribbon can show topological edge states with a ribbon width of ~4-6 nm. Those edge bands show crossing through the Fermi level an odd number of times, with one kind of spin-polarization connecting the valence band continuum and conduction band continuum. The topological features of the edge bands hold even under small and medium bending in the nanoribbon, while large bending induces large band splitting, resulting in a topological switch-off in the edge bands. The semiconducting 1T' WSe2 nanoribbon shows a large tunability with bending in optical absorption spectra and exciton states. The lowest-energy exciton is changed from optically dark in the flat nanoribbon to bright in the bent nanoribbons. These properties in the 1T' WSe 2 nanoribbons suggest potential applications in controllable quantum electronics and exciton-based quantum information processes.
36 MATERIALS SCIENCE↗
Energy Frontier Research Centers: Center for the Computational Design of Functional Layered Materials (CCDM) August 1, 2014 - July 31, 2018; Center for Complex Materials from First Principles (CCM) August 1, 2018 - July 31, 2021 (Final Report)
The mission of the DOE Energy Frontier Research Centers CCDM (2014-2018) and CCM (2018-2021) was to theoretically develop, computationally apply, and experimentally validate electronic structure methods for all materials, with a focus on the complex materials, especially layered and two-dimensional materials, strongly-correlated materials, and liquid water. This was achieved by over 200 published journal articles authored by about 17 senior investigators from physics and chemistry and from theory, computation, and experiment, plus their collaborators. In particular, the Centers confirmed the predictive power of the SCAN (strongly constrained and appropriately normed) density functional, which was constructed to satisfy 17 known exact constraints and several appropriate norms. Without being fitted to real bonded systems, and at a modest computational cost, SCAN correctly predicted covalent, ionic, metallic, hydrogen, and van der Waals bonds in many challenging materials. SCAN gave an improved description of defects in semiconductors, surface properties of metals, seven phases of ice, liquid water, liquid and supercooled silicon, subtle structural distortions in ferroelectrics, formation energies and structural predictions for solids, and critical pressures for structural phase transitions. Perhaps most remarkably, SCAN correctly described some strongly-correlated materials that were previously believed to be beyond the reach of density-functional approximations. SCAN is the only density functional that correctly predicts the band gap closing under chemical doping of the cuprate high-temperature superconducting materials. SCAN also predicts a landscape of competing stripe and magnetic phases in the cuprates. For some materials with some codes, SCAN has convergence problems that are greatly reduced by the CCM-developed r 2 SCAN, without loss of accuracy or rigor. SCAN and r 2 SCAN still make some self-interaction error, which is greatly reduced by the CCDM/ CCM-developed local orbital scaling correction (LOSC). These Centers further proved that the fundamental energy gaps of a solid from an orbital energy difference and from total energy differences are the same for a large class of generalized Kohn-Sham (GKS) functionals, including SCAN and standard hybrid functionals, and that symmetry breaking arises when a dynamic density fluctuation drops to zero frequency. The Centers identified new mechanisms for catalysis in layered materials with ions intercalated between the layers, investigated charge density waves both in model systems and in real layered materials, studied changes of band gap with the number of layers, and explored topological ultrathin films, bent nanoribbons, and defects.
08 HYDROGEN↗
Spin-polarization anisotropy controlled by bending in tungsten diselenide nanoribbons and tunable excitonic states
A WSe 2 monolayer shows many interesting properties due to its spin-orbit coupling induced spin splitting in bands around the Fermi level and the spin-valley configuration. The orientation of the spin polarization in the relevant bands is crucial for the nature of exciton states and the optical valley selectivity. In this work, we studied the WSe 2 nanoribbons under different mechanical bending curvatures and electron/hole doping with density functional theory and their optical absorption and excitonic states with many-body perturbation GW and BSE (Bethe-Salpeter equation) methods. We found that the WSe 2 nanoribbons can exhibit an enhanced SOC effect and a spatially varying spin polarization in bands around the Fermi level under bending. The spin-polarization can show an anisotropy (or asymmetry) in those nearly degenerate bands, leading to a controllable magnetism via bending and electron/hole doping to the nanoribbons, suggesting a potential application in compact and controllable magnetic nanodevices and spintronics. The optical absorption spectrum of the nanoribbon presents a large tunability with bending within the near infrared region of about 0.4 to 1.5 eV, showing an enhanced absorption at a large bending condition. Finally, the exciton states generally show mixed or various spin configuration in the electron and hole pairs that are controlled by bending, potentially useful for applications in spin-based quantum information processes.
36 MATERIALS SCIENCE↗
Spin-crossover complexes: Self-interaction correction vs density correction
Complexes containing a transition metal atom with a 3d 4 –3d 7 electron configuration typically have two low-lying, high-spin (HS) and low-spin (LS) states. The adiabatic energy difference between these states, known as the spin-crossover energy, is small enough to pose a challenge even for electronic structure methods that are well known for their accuracy and reliability. In this work, we analyze the quality of electronic structure approximations for spin-crossover energies of iron complexes with four different ligands by comparing energies from self-consistent and post-self-consistent calculations for methods based on the random phase approximation and the Fermi–Löwdin self-interaction correction. Considering that Hartree–Fock densities were found by Song et al., J. Chem. Theory Comput. 14, 2304 (2018), to eliminate the density error to a large extent, and that the Hartree–Fock method and the Perdew–Zunger-type self-interaction correction share some physics, we compare the densities obtained with these methods to learn their resemblance. Here, we find that evaluating non-empirical exchange-correlation energy functionals on the corresponding self-interaction-corrected densities can mitigate the strong density errors and improves the accuracy of the adiabatic energy differences between HS and LS states.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗