Engineering topics

Ryan Hoffmann

Publications and source records attributed to Ryan Hoffmann.

6 records

NASA NTRS2024

Evaluation of the Mechanical Properties of Innovative Spacecraft Materials Under a Low Earth Orbit-Simulated Atomic Oxygen Environment

External spacecraft materials are crucial for protecting satellites from the harsh space environment. This study evaluates the radiation effects of low Earth orbit (LEO) space weather, focusing on high-energy electron and atomic oxygen (AO) exposure, on several modern spacecraft materials. The materials under investigation are “flight duplicates" of samples scheduled for launch as part of the Materials International Space Station Experiment Flight Facility (MISSE-FF) mission in 2025. To observe changes in stress distribution within weathered polymers, the experimental setup based on the photo elasticity technique was developed.

Yuliya Kuznetsova↗

NASA NTRS2023

In Situ Sensors for Monitoring the Space Environment and Its Effect Upon Satellite Materials

Development of advanced materials for space requires both an understanding of the space environment and how a material might be affected by the environment. Despite a long history of space missions, we have insufficient knowledge to fully characterize the exposure that spacecraft materials experience over a mission lifetime, much less the effects that this exposure induces upon spacecraft materials. In addition, the physics of materials/environment interactions is less well understood than optimum owing to the complex nature of the space environment and the challenges in simulating this environment in the laboratory. Our understanding of both the environment and materials behavior in that environment would be advanced by the development of sensors that could be deployed on a variety of missions and collect sufficient data. In-situ environmental sensors would improve both our understanding of spacecraft materials environmental durability and lead to improved ground-laboratory investigations. There are a number of factors that have limited the development of a widespread network of space environmental sensors intended to fill this need. The cost of deploying space systems generally encourages system designers to minimize any functionality that is extraneous to the main mission of a space vehicle. Deploying additional sensors adds cost, size, weight, power and telemetry bandwidth that could interfere with mission goals. The complexity of the space environment makes it challenging to manufacture a sensor that provides a complete characterization of its environment, especially with a limited impact upon the host. Finally, such a hosted sensor could impact the security or reliability of the main mission.

Jim Barrie↗

NASA NTRS2019

Spectroscopic Behavior of Composite, Black Thermal Paint, Solar Cell, and Multi-layered Insulation Materials in a GEO Simulated Environment

Materials currently populating Earth orbital regimes can be distinguished by comparing remote observational data to that of optical material measurements obtained in the laboratory. Experimentation for this research primarily involved the acquisition of spectroscopic measurements on materials of interest to the telescopic observational community for enhanced space situational awareness. Common spacecraft materials worthy of preeminent analysis for this investigation include a carbon-carbon (c-c) matrix composite, various black thermal paints, a GPS solar cell and three different cover glass components. These materials were subjected to a simulated geosynchronous Earth orbit (GEO) space environment with the intent of observing material optical property behavior over quantitative exposure time. The aforementioned materials have been measured in their pristine and GEO simulated exposed conditions. A reflectance spectrometer and a bi-directional reflectance distribution function (BRDF) optical system have been operated to perform material characterization, optical property analysis, and to further compare such data to telescopic observational data acquired on equal materials.

Reyes, Jacqueline A.↗

NASA NTRS2019

Spectroscopic Behavior of Composite, Black Thermal Paint, Solar Cell, and Multi-Layered Insulation Materials in a GEO Simulated Environment

The population of objects orbiting Earth is dominated by orbital debris. The following study presents reflectance spectroscopic measurements and bidirectional reflectance distribution function (BRDF) evaluations taken on common spacecraft materials (Table 1), some of which are likely candidates in the orbital debris population. Their optical properties were assessed in their pristine conditions, as well as after exposure in a space environmental chamber used to simulate space weathering. The materials studied will prove that they have excellent properties in resisting the effects of damage that are common in both low Earth orbit and geosynchronous Earth orbit (GEO) based on the research discussed in this work.

Reyes, Jacqueline A.↗

NASA NTRSDate not supplied

Spacecraft Material Characterization Using Reflectance Spectra Extracted from RGB/IR Color Images

The space environment is detrimental to the exterior of the spacecraft and imposes stringent requirements on spacecraft materials. Space materials are often expected to perform for 15-20 years in the harsh space environment without significant degradation of their optical, electrical, mechanical and thermal properties. Further, as commercial activities increase in the space domain, development of predictive capability for material evolution is critical for agile adaption of novel materials. Therefore, it is very important to understand the effects of the space environments on the spacecraft materials. The Materials on the International Space Station Experiment Flight Facility (MISSE-FF) has flown numerous material samples to investigate the effect of LEO space weather exposure on the performance and durability of materials and devices. We are manifest on the MISSE-16 mission, scheduled to launch in June 2022, to fly fifteen novel and well-characterized materials in the LEO environment for a duration of six months. Changes in spectral reflectivity will be measured in real time throughout the mission with an RGB/IR camera. These time-resolved data will function as a "space-truth" reference for our team's ongoing laboratory-based space weather-material interaction experiments. Correlation of the MISSE-16 data with extensive ground testing of duplicate samples under simulated space weather conditions will enable development of fundamental chemical models for material degradation. This paper discusses preliminary results from the ground test campaign to collect the RGB/IR images for pristine and damaged materials and the development of machine learning algorithms to extract reflectance spectra from the color images.

Jainisha R. Shah↗

NASA NTRSDate not supplied

United States Spacecraft Charging Overview

The United States (US) has a strong history of spacecraft charging studies which predates the first Spacecraft Charging Technology Conference (SCTC) in 1976. Significant progress has been made since the 14th SCTC was held in the Netherlands where the US last presented a country summary to the SCTC. We present here a high-level survey of spacecraft charging work performed since 14th SCTC. Our presentation will include work from the US Space Force, the National Aeronautics and Space Administration (NASA), the Jet Propulsion Laboratory (JPL), Johns Hopkins Applied Laboratory (APL), industry, and academia. We include flight contributions, latest design specifications, ground testing, modeling and simulation, model development, facilities, anomaly study advancement, and various collaborations within the US charging community.

Linda Neergaard Parker↗