Search NASA⌕ Search

Engineering topics

Ryan, P. J.

Publications and source records attributed to Ryan, P. J..

Super-X and conventional divertor configurations in MAST-U ohmic L-mode; a comparison facilitated by interpretative modelling

Measurements are presented, alongside corresponding interpretative SOLPS-ITER simulations, of the first MAST-U experiments comparing ohmically heated L-mode fuelling scans in Conventional divertor (CD) and Super-X divertor (SXD) configurations. In experiment, at comparable outer mid-plane separatrix electron density, $n_{e,\textrm{sep,OMP}}$, the maximum lower outer target heat load was found to be a factor 16 $\,\pm\,7$ lower in SXD compared to CD. In simulation, a factor 26.8 reduction was found (slightly higher than the experimental range), suggesting an additional reduction in SXD compared to the factor 9.3 expected from geometric considerations alone. According to the simulations, this additional reduction in the SXD is due to a net radial transport of the energy remaining downstream of the $T_e = 5$ eV location. This energy is carried out of the critical (highest heat load) flux tube by deuterium atoms, demonstrating the importance of a longer legged divertor which provides space for this to occur. Importantly, in both simulation and experiment, the SXD has minimal impact on the upstream n e and T e profiles. Spectral inferences of detachment front movement in SXD compare well between simulation and experiment. In regions of high magnetic field gradient, the parallel movement of the front towards the X-point becomes less sensitive to increasing $n_{e,\textrm{sep,OMP}}$, in qualitative agreement with simplified models and previous predictive simulations. Additional aspects, regarding the target ion flux rollover, upstream separatrix temperature and drift effects, are also presented and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlling spin current polarization through non-collinear antiferromagnetism

The interconversion of charge and spin currents via spin-Hall effect is essential for spintronics. Energy-efficient and deterministic switching of magnetization can be achieved when spin polarizations of these spin currents are collinear with the magnetization. However, symmetry conditions generally restrict spin polarizations to be orthogonal to both the charge and spin flows. Spin polarizations can deviate from such direction in nonmagnetic materials only when the crystalline symmetry is reduced. Here, we show control of the spin polarization direction by using a non-collinear antiferromagnet Mn 3 GaN, in which the triangular spin structure creates a low magnetic symmetry while maintaining a high crystalline symmetry. We demonstrate that epitaxial Mn 3 GaN/permalloy heterostructures can generate unconventional spin-orbit torques at room temperature corresponding to out-of-plane and Dresselhaus-like spin polarizations which are forbidden in any sample with two-fold rotational symmetry. Our results demonstrate an approach based on spin-structure design for controlling spin-orbit torque, enabling high-efficient antiferromagnetic spintronics.

36 MATERIALS SCIENCE↗

Controlling symmetry of spin-orbit entangled pseudo spin state through uniaxial strain

In layer-structured Sr 2 IrO 4 , strong crystal electric field and spin-orbit coupling result in an intriguing spin-orbit entangled J eff =1/2 state, resembling the spin S=1/2 state of high-temperature superconducting cuprates. Our study unravels the intricate relationship between the lattice and the pseudospin interactions using uniaxial strain. Applied along the [1 1 0] direction, a compressive strain does not induce any effect. In contrast, the strain along [1 0 0] triggers a dramatic detwinning of the magnetic domains bringing the system to a single domain at around 0.04% strain. The strain driven detwinning rate is temperature independent showing that it does not exhibit a spontaneous orthorhombic lattice distortion driven by the pseudo-Jahn-Teller effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-situ fabrication and transport properties of (111) Y 2 Ir 2 O 7 epitaxial thin film

We report on the successful fabrication of (111) oriented thin films of pyrochlore iridate Y 2 Ir 2 O 7 by means of solid phase epitaxy. Essentially, we developed an entirely in situ annealing protocol, which is superior to the conventional ex-situ routine that requires multi-hour annealing to stabilize the proper pyrochlore structure. The morphological quality of the films has been confirmed by x-ray diffraction, reflectivity, and reciprocal space mapping, demonstrating their high crystallinity with a pure pyrochlore phase and an expected epitaxial relation to the substrate. Strikingly, below the magnetic phase transition, the temperature dependence of resistivity shows a power-law behavior with the power exponent of similar to 3/2, characteristic of a Weyl semimetal in the presence of impurities and electron-electron correlations. Finally, below 10K, the magneto-transport measurements reveal the emergence of a non-saturated negative magnetoresistance up to 9T with a small "valley" around zero field. These findings are further interpreted in relation to the weak anti-localization effect and the non-collinear antiferromagnetic ordering on the Ir sublattice.

36 MATERIALS SCIENCE↗

Iodine orbital moment and chromium anisotropy contributions to CrI 3 magnetism

The recent discovery of two-dimensional (2D) magnets, with a number of interesting magnetic properties, has drawn much interest due to their potential for future 2D spintronic device applications. CrI 3 , a van der Waals magnet, exhibits two-dimensional ferromagnetism even in monolayer form, stabilized by strong magnetic anisotropy. Its interlayer magnetic ordering is coupled to structural layer stacking, implying that the charge density distribution mediating van der Waals interactions plays a key role in the magnetic interaction between the layers. Using polarization-dependent x-ray spectroscopy, we investigated the response of the electronic environment around Cr and I sites to structural changes of layer stacking order. The highly anisotropic nature of the Cr local environment is significantly enhanced and is accompanied by changes in the valence band, in the rhombohedral phase. Magnetic spectroscopy measurements reveal a sizable iodine orbital moment, indicating the iodine contribution to magnetic anisotropy. Finally, our results uncover an important role for the extended nature of anisotropic Cr orbital states in dictating interlayer magnetic interactions and the iodine contribution to magnetic anisotropy.

36 MATERIALS SCIENCE↗

Emergent behavior of LaNiO 3 in short-periodic nickelate superlattices

Heterostructure engineering provides an efficient way to obtain several emergent phases of LaNiO 3 , as demonstrated in recent works. In this work, a new class of short periodic superlattices, consisting of LaNiO 3 and EuNiO 3 have been grown by pulsed laser interval deposition to investigate the effect of structural symmetry mismatch on the electronic and magnetic behaviors. Using synchrotron based soft and hard x-ray resonant scattering experiments, we have found that these heterostructures undergo simultaneous electronic and magnetic transitions. Most importantly, LaNiO 3 within these artificial structures exhibits a new antiferromagnetic, charge ordered insulating phase, which may be a potential candidate to achieve high temperature superconductivity.

36 MATERIALS SCIENCE↗