Search NASA⌕ Search

Engineering topics

Saboo, Abhinav

Publications and source records attributed to Saboo, Abhinav.

High-temperature lean Cu alloys with Cr-to-Nb atomic ratio of 2

Two Cu-Cr-Nb alloys, denoted as alloy 1 (comprising Cu-0.89 at% Cr-0.42 at% Nb) and alloy 2 (comprising Cu-1.84 at% Cr-0.99 at% Nb), were produced through a series of manufacturing processes including vacuum induction melting, melt spinning, consolidation, brazing, and baking, with both alloys aimed at achieving a nominal Cr-to-Nb atomic ratio of 2. Microstructural characterization using transmission electron microscopy and X-ray diffraction identified the cubic C15 Laves-phase Cr 2 Nb as the dominant precipitate in both alloys, cross-validated by thermodynamic calculations and atomistic simulation-based density functional theory (DFT). Besides cubic C15 Cr 2 Nb, hexagonal C14-phase Cr 2 Nb and α-BiF3 cubic structured Cr 3 Nb were also observed in the alloys, including a coherent interface formed between the Cr 3 Nb precipitate and the Cu matrix. The hardness of the alloys increases, and the electrical conductivity decreases with increasing alloying addition content; two practical equations described the trends. Further DFT simulations revealed that the electrical conductivity (conductance) of the Cu/Cr 2 Nb interface is an order of magnitude higher than the intrinsic Cu high-angle grain boundaries.

36 MATERIALS SCIENCE↗

CALPHAD Uncertainty Quantification and TDBX

CALPHAD uncertainty quantification (UQ) is the foundation of materials design with quantified confidence. We report a framework and software packages to enable CALPHAD UQ assessment and calculation using commercial CALPHAD software (Thermo-Calc). This Bayesian inference framework is coupled with a Markov chain Monte Carlo algorithm to establish uncertainty traces with a given thermodynamic database file (TDB) and corresponding experimental data points. This general framework is demonstrated with the Ni–Cr binary system. The algorithm is firstly validated on synthetic data with known ground truth. Then it is applied to real experimental data to generate posterior traces. We develop a file format named TDBX, which provides a single source of truth by combining the original TDB content and the traces for each assessed Gibbs energy parameter. CALPHAD UQ calculations are performed based on the TDBX file, from which uncertainties for phase boundaries, enthalpy curves, and solidification range are collected as examples of basic design parameters. This TDBX file with corresponding scripts are made open-source. Finally, the combination of CALPHAD UQ assessments and calculations connected by TDBX supports uncertainty-assisted modeling, enabling the integrated application of modern design with uncertainty methodologies to computational materials design.

36 MATERIALS SCIENCE↗

Improved Models of Long-Term Creep Behavior of High Performance Structural Alloys

In this program, QuesTek Innovations LLC, a leader in the field of computational materials design, proposes to develop a robust creep-modeling toolkit that expands its computational Materials by Design® technology, in order to predict the long-term creep performance of materials for base alloys and weldments in fossil energy systems under wide thermal and mechanical conditions. The Material Database Group of NIMS (National Institute for Material Science, JAPAN) provides reliable public data for long-term creep behavior over 300,000 hours (> 34 years) for a variety of materials including high Cr steels along with seminal work performed by EPRI (Electric Power Research Institute) on creep failure of these steels. QuesTek would rely on these premier institutions for experimental data needed to calibrate models. The developed tool has wider applications than the state-of-the-art modeling tools. It includes the effects of chemistry variations, microstructure variation (weldments) etc .which is lacking in many available models requiring the model to be calibrated to large number of datasets for accurate predictions. A model based on fundamental mechanism has promises in application to different materials, other than the demonstrated material (Grade 91 steels) in the current program. As a result of such an effort, we envision greatly advancing the state-of-the-art modeling tools for creep life assessments of different materials.

20 FOSSIL-FUELED POWER PLANTS↗

Energetics of cobalt alloys and compounds and solute–vacancy binding in fcc cobalt: A first-principles database

Using extensive first-principles density functional calculations, we calculate thermodynamic properties of binary fcc cobalt-based alloys with 25 different solute elements. For each solute element X, we calculate its (a) nearest- and next-nearest-neighbor solute–vacancy binding energy, (b) dilute impurity mixing energy with respect to the equilibrium and hypothetical fcc-based reference states of the solute, (c) enthalpy of formation of cobalt-rich binary ordered compounds in the Co–X system, (d) solubility enthalpy, and other derived quantities. Here, we find that the solute–vacancy binding energies of all the studied solutes in fcc cobalt are positive (indicating favorable binding), in contrast to nickel, aluminum, magnesium, and copper-based alloys, where mid 3d transition metal solutes have unfavorable solute–vacancy binding. We study the physical and chemical effects influencing solute–vacancy binding energy, and find that (a) it correlates broadly with solute size—larger solute atoms possess stronger binding with vacancies—and this is understood in terms of strain relief and secondary next-nearest-neighbor interactions, and (b) it follows a parabolic trend as a function of d-occupancy across the transition metal series—falling to a minimum at the middle of the series—and this is understood in terms of a d-band filling effect. We also find this d-band filling effect in other calculated quantities such as the dilute impurity volumes and dilute impurity mixing energies. To aid in building thermodynamic databases, we tabulate all the calculated thermodynamic quantities, and compare them with experimental phase diagrams data and previous literature, and find good agreement where such data is available.

36 MATERIALS SCIENCE↗