Search NASA⌕ Search

Engineering topics

Sachs, Emanuel M.

Publications and source records attributed to Sachs, Emanuel M..

Systems and methods for crack detection

Embodiments related to systems and methods of crack detection in wafers (e.g., silicon wafers for photovoltaics, photovoltaic devices including silicon wafers) are disclosed. In some embodiments, an apparatus may include a light source configured to illuminate a side of a wafer and a camera directed towards a first face of the wafer. In some embodiments, a long axis of a field of view of the camera may be angled relative to a propagation direction of the light source. In some embodiments, at least a portion of the field of view of the camera is offset from the path of propagation of light emitted from the light source through the wafer. In some embodiments, at least a portion of a light beam may be oriented at a positive non-zero angle relative to the first face of the wafer, and a dimension of the light beam normal to the first face of the wafer may be larger than a thickness of the wafer.

14 SOLAR ENERGY↗

Detection of sub-500-μm cracks in multicrystalline silicon wafer using edge-illuminated dark-field imaging to enable thin solar cell manufacturing

High capital expenditures associated with manufacturing thin silicon wafers make it difficult for the industry to scale up and prevent novel technologies from entering the market. Thin wafers fail largely due to breakage during solar cell processing and handling. One of the root causes for breakage is sub-mm edge cracks in the silicon wafer, and these cracks cannot be reliably detected by most commercially-available crack detection tools. In this work, we first investigate the correlation between wafer thickness and critical crack length, and explain the importance of detecting sub-500-μm edge cracks as the wafer thickness is reduced. Secondly, we extend our previous work of micro-crack detection to demonstrate an edge illumination technique using a near-infrared laser to image edge cracks less than 500 μm in length in multicrystalline silicon. Thirdly, we investigate two fundamental edge illumination mechanisms based on dark-field imaging; namely, direct and vicinal illumination. We will then compare these methods to a state-of-the-art rear illumination method. The advantages and disadvantages of both illumination methods are presented and provide an in-depth analysis of light-crack interaction. In particular, we find that the robustness of vicinal illumination is due to diffuse reflectance. The diffuse reflectance has less dependence on crack configurations, while direct illumination has more dependence on the crack configurations because it utilizes specular reflectance. Our results show that our proposed prototype can detect sub-mm edge cracks in multicrystalline silicon wafers, which is an important step in enabling thin silicon wafer manufacturing.

14 SOLAR ENERGY↗

Design of a Submillimeter Crack-Detection Tool for Si Photovoltaic Wafers Using Vicinal Illumination and Dark-Field Scattering

Micro-cracks in silicon solar cells reduce the mechanical strength of the wafer, and cause breakage during manufacturing, transportation and field operation. Therefore, there is a need to trace where micro-cracks initiate in the manufacturing line. As wafers become thinner, the critical crack length required for fracture significantly decreases for the same loading conditions. Currently, very few industry-standard tools can reliably detect sub-mm cracks, which will become more critical for thinner wafers. In this work, we demonstrate a technique to detect sub-mm cracks located at the edges of various multicrystalline silicon wafers and solar cells. The proposed technique, which is based on near-infrared dark-field imaging with vicinal laser illumination from the wafer edge, has several advantages over state-of-the-art optical transmission imaging and dark-field scattering techniques. Moreover, we adapt this technique to achieve the high-throughput requirement of in-line metrology, hence it can be used to detect sub-mm cracks in a manufacturing line. With a high-framerate linescan camera, this proposed crack technique is designed to theoretically achieve a scanning throughput of less than 1 second per wafer.

14 SOLAR ENERGY↗

Crack detection in crystalline silicon solar cells using dark-field imaging

The high capital expenditure (capex) necessary to manufacture crystalline silicon PV modules negatively affects the levelized cost of electricity (¢/kWh) and critically impacts the rate at which the PV industry can scale up. Wafer, cell, and module fabrication with thin free-standing silicon wafers is one key to reduce capex. Thin wafers reduce capex associated with silicon refining and wafer fabrication, which together sum to 58% of the total capex of silicon module manufacturing. In addition, thin wafers directly and significantly reduce variable costs. However, introducing 50 μm thin free-standing wafers into today’s manufacturing lines result in cracking, creating a yield-based disincentive. Due to the brittle nature of silicon, wafer breakage is the major concern due to the high stress that is induced during processes in manufacturing lines. In this paper, we describe an improved method for edge micro-crack detection that can help enable low-capex, thin free-standing Si wafers. We present a method of detecting and measuring cracks along wafer edges by using a dark-field IR scattering imaging technique which enables detection of edge cracks at the micron scale.

14 SOLAR ENERGY↗