Engineering topics

Saint Clair, Terry L.

Publications and source records attributed to Saint Clair, Terry L..

4 records

NASA NTRS2000

Molecular Level Coating for Metal Oxide Particles

Polymer encapsulated metal oxide particles are prepared by combining a polyamide acid in a polar aprotic solvent with a metal alkoxide solution. The polymer was imidized and the metal oxide formed simultaneously in a refluxing organic solvent. The resulting polymer-metal oxide is an intimately mixed commingled blend, possessing synergistic properties of both the polymer and preceramic metal oxide. The encapsulated metal oxide particles have multiple uses including, being useful in the production of skin lubricating creams, weather resistant paints, as a filler for paper, making ultraviolet light stable filled printing ink, being extruded into fibers or ribbons, and coatings for fibers used in the production of composite structural panels.

McDaniel, Patricia R.↗

NASA NTRS1990

LaRC-I-TPI - A status report on a new high performance, thermoplastic polyimide

A new thermoplastic polyimide designated LaRC-I-TPI has been prepared from 4,4'-isophthaloyldiphthalic anhydride (IDPA) and 1,3-phenylenediamine (m-PDA), phthalic anhydride endcapped or unendcapped. It is closely related to the well-known commercial LaRC-TPI. A survey of the synthesis and some thermal, film, adhesive, fracture toughness, and composite properties of this new polyimide is presented. While both materials have similar properties at comparable stages of development, LaRC-I-TPI should be less expensive to manufacture as a result of the use of lower cost readily available monomers.

Pratt, J. Richard↗

NASA NTRS1988

High performance composites research at NASA-Langley

Barriers to the more extensive use of advanced composites in heavily loaded structures on commercial transports are discussed from a materials viewpoint. NASA Langley matrix development activities designed to overcome these barriers are presented. These include the synthesis of processable, tough, durable matrices, the development of resin-property/composite-property relationships which help guide the synthesis program, and the exploitation of new processing technology to effectively combine reinforcement filaments with polymer matrices. Examples of five classes of polymers being investigated as matrix resins at NASA Langley are presented, including amorphous and semicrystalline thermoplastics, lightly crosslinked thermoplastics, semiinterpenetrating networks, and toughened thermosets. Relationships between neat resin modulus, resin fracture energy, interlaminar fracture energy, composite compression strength, and postimpact compression strength are shown. Powder and slurry processing techniques are discussed.

Saint Clair, Terry L.↗

NASA NTRS1986

Semi-interpenetrating networks of LARC-TPI

In a previous research project at NASA-Langley, a novel semi-2-interpenetrating polymer network (semi-2-IPN) was prepared from the linear, thermoplastic polyimidesulfone, and the more brittle, crosslinked, acetylene-terminated imidesulfone. Synergistic qualities such as improved thermooxidative stability and better processability were achieved from this combination. The novelty of the system lay in the fact that the structures of the linear and crosslinking components were nearly identical. This similarity in structure eliminates any phase separation problems common to many-IPNs. In a similar way, a semi-2-IPN was prepared from linear, thermoplastic LARC-TPI and acetylene-terminated LARC-TPI (ATLARC-TPI). The preparation and characterization of this system will be discussed as well as adhesive and composite data.

Egli, Annemarie H.↗