Search NASA⌕ Search

Engineering topics

Saito, Tomonori

Publications and source records attributed to Saito, Tomonori.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Membrane design for non-aqueous redox flow batteries: Current status and path forward

Redox flow batteries are promising technologies for large-scale, long-duration energy storage applications. Among them, non-aqueous redox flow batteries (NARFB) represent a transformative flow battery system since NARFBs potentially offer a higher energy density than aqueous flow batteries. However, many technical challenges remain for NARFBs, including the lack of high-performance membranes, low solubility of redox materials, and poor cycling efficiencies. Membranes serve a vital function in NARFBs, as they allow for selective ion transport while providing separation between the anolyte and catholyte. NARFB membrane development is an emerging research area, and this article reviews their design and critical factors that influence membrane properties, including solvent uptake, ion transport, and redox species permeability. A greater understanding of membrane behavior in non-aqueous solutions provides design principles for developing next-generation membranes for NARFB. In conclusion, we summarize the challenges, target metrics, and future perspectives for NARFBs.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Self-healing barrier films for vacuum insulation panels

A self-healing vacuum insulation panel and a method of manufacture are provided. The vacuum insulation panel includes a self-healing, multi-layer barrier film including a separator between a curing agent and a curable resin. Upon damage to the separator, the curing agent penetrates the separator due to a pressure differential across the barrier film and reacts with the curable resin to seal any cuts or punctures. The curing agent and the curable resin can be selected to have long term stability and a short reaction time with no need for external stimuli. As a result, the multi-layer barrier film can retain the internal vacuum and maintain a desirably low thermal conductivity using low-cost, commercially available epoxies and curing agents.

Biswas, Kaushik↗
DOE OSTI2022

Indirect additive manufacturing process using amine-containing adhesive polymers

A method for binder jetting additive manufacturing of an object, the method comprising: (i) separately feeding a powder from which said object is to be manufactured and a solution comprising an adhesive polymer dissolved in a solvent into an additive manufacturing device, wherein said adhesive polymer is an amine-containing polymer having a molecular weight of at least 200 g/mole and is present in said solution in a concentration of 1-30 wt % to result in said solution having a viscosity of 2-25 mPa·s and a surface tension of 25-45 mN/m at room temperature; and (ii) dispensing selectively positioned droplets of said adhesive polymer, from a printhead of said additive manufacturing device, into a bed of said powder to bind particles of said powder with said adhesive polymer to produce a preform having a shape of the object to be manufactured.

Saito, Tomonori↗
DOE OSTI2021

Separator Effect on Zinc Electrodeposition Behavior and Its Implication for Zinc Battery Lifetime

We report uncontrolled zinc electrodeposition is an obstacle to long-cycling zinc batteries. Much has been researched on regulating zinc electrodeposition, but rarely are the studies performed in the presence of a separator, as in practical cells. Here, we show that the microstructure of separators determines the electrodeposition behavior of zinc. Porous separators direct zinc to deposit into their pores and leave “dead zinc” upon stripping. In contrast, a nonporous separator prevents zinc penetration. Such a difference between the two types of separators is distinguished only if caution is taken to preserve the attachment of the separator to the zinc-deposited substrate during the entire electrodeposition–morphological observation process. Failure to adopt such a practice could lead to misinformed conclusions. Our work reveals the mere use of porous separators as a universal yet overlooked challenge for metal anode-based rechargeable batteries. Countermeasures to prevent direct exposure of the metal growth front to a porous structure are suggested.

25 ENERGY STORAGE↗
DOE OSTI2021

Design of tough adhesive from commodity thermoplastics through dynamic crosslinking

Tough adhesives provide resistance against high debonding forces, and these adhesives are difficult to design because of the simultaneous requirement of strength and ductility. Here, we report a design of tough reversible/recyclable adhesive materials enabled by incorporating dynamic covalent bonds of boronic ester into commodity triblock thermoplastic elastomers that reversibly bind with various fillers and substrates. The spectroscopic measurements and density functional theory calculations unveil versatile dynamic covalent binding of boronic ester with various hydroxy-terminated surfaces such as silica nanoparticles, aluminum, steel, and glass. The designed multiphase material exhibits exceptionally high adhesion strength and work of debonding with a rebonding capability, as well as outstanding mechanical, thermal, and chemical resistance properties. Bonding and debonding at the interfaces dictate hybrid material properties, and this revelation of tailored dynamic interactions with multiple interfaces will open up a new design of adhesives and hybrid materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Processing and 3D printing of SiCN polymer-derived ceramics

Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. Furthermore, the results of this work can be used as guidelines for future additive manufacturing of PDCs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Super-stretchable self-healing polymer

An elastic composition comprising the following structure: wherein: PDMS is polydimethylsiloxane having at least 5 dimethylsiloxane units; L is a bond or hydrocarbon linker; the asterisk (*) in A units denotes a connection point with an asterisk in B units, and at least one of the following linkages connect between connection points: r is an integer of at least 3; R is a hydrocarbon or siloxane-containing linking moiety; the composition includes a multiplicity of A units and multiplicity of B units; and a portion of the connection points are necessarily terminated by endcapping groups, wherein at least a portion of the endcapping groups are selected from the following structures: The invention also includes methods for making and using the above-described elastic composition.

Saito, Tomonori↗
DOE OSTI2021

Block graft copolymer binders and their use in silicon-containing anodes of lithium-ion batteries

A graft copolymer composition comprising the following structure: wherein: Ax represents a polymer backbone having a number of polymerized monomer units x; [By] represents a multiplicity of a graft polymer side chain having a number of polymerized monomer units y, and at least a portion of the monomer units in By contains a group —C(O)OM, with M independently selected from H and alkali metals; [C] represents a multiplicity of positions on the polymer backbone Ax where the graft polymer side chain B or any other graft polymer side chain is not attached; the subscript w represents a grafting density of the group By, wherein w is an integer within a range of 10-50%; and the subscript z represents a density of the group C, wherein z=(100−w) %. The invention is also directed to lithium-ion batteries in which the above-described composition is incorporated in an anode of the battery.

Saito, Tomonori↗
DOE OSTI2021

All-aerosol-jet-printed highly sensitive and selective polyaniline-based ammonia sensors: a route toward low-cost, low-power gas detection

In this work, we report the design and scalable fabrication of a low-cost and low-power polyaniline-based (PANI) ammonia (NH3) gas sensor on polyimide (PI) substrates using additive manufacturing techniques. The silver interdigitated electrode (IDE) arrays and conducting polymer films are printed onto PI using a direct-write technology of aerosol-jet printing. Morphological characteristics are examined by scanning electron microscopy and energy-dispersive X-ray analysis which reveal homogeneously printed PANI film on the IDE platform. The gas sensing performance is evaluated in the analytical early leak detection range of 5–1000 ppm NH3 in air as a function of both thermal (23 °C, 50 °C, 80 °C) and relative humidity (RH = 0%, 30%, 50%) exposures. The sensor exhibits sensitivity down to 5 ppm NH3 with a sub-ppm detection limit and good repeatability. We observe rapid NH3 detection at 0% RH with very extended times for equilibration and recovery. However, at both 30 and 50% RH, the room temperature response and recovery times are reduced to only about 1 min and 5 min, respectively. Experiments also reveal good sensitivity toward the analyte even at higher operating temperatures. Present results merit the practical application of aerosol-jet-printed, low-power sensors for industrial applications where low-level hazardous gas detection is essential.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct ink writing techniques for in situ gelation and solidification

Direct ink writing (DIW) is an extrusion-based 3D printing method which prints near ambient temperatures and has one of the broadest printable material selections among additive manufacturing techniques. However, DIW uses viscoelastic materials susceptible to collapse during printing. Overall, one promising route to improve the structural integrity of viscoelastic inks is using in situ curing methods to increase the yield strength of the printed structures after deposition. This review summarizes progress in three representative methods of in situ curing for DIW, including ultra-violet-induced crosslinking, rapid cure of reactive ingredients, and flash vaporization of a solution’s solvent to coagulate dissolved polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Gel composite electrolyte – an effective way to utilize ceramic fillers in lithium batteries

Achieving synergy between ion-conducting polymers and ceramics in a composite electrolyte has been proven to be difficult as the complicated ceramic/polymer interface presents challenges to understand and control. In this work, we report a strategy to utilize discrete ceramic fillers to form a gel composite electrolyte with enhanced transport properties for lithium metal batteries. The matrix of the composite membrane is crosslinked poly(ethylene oxide) with bis(trifluoromethane)sulfonimide lithium salt (LiTFSI). The membrane is plasticized with tetraethylene glycol dimethyl ether (TEGDME). The incorporation of doped-lithium aluminum titanium phosphate particles (LICGC™) into the membrane greatly improves the membrane's cycling characteristics against the lithium electrode, exhibiting lower interfacial impedance, lower overpotential and higher rate capability. The underpinnings of the superior performance of the gel composite electrolyte are discussed in depth. LICGC™ can immobilize the TFSI - anions in the polymer matrix and simultaneously promote Li+ transport by increasing the plasticizer to Li + ratio. Further, the transport enhancement is achieved without sacrificing mechanical properties. The composite membrane shows significantly improved handleability and processability. This work sheds light on the design strategy for a safe electrolyte towards stable Li metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Turning Rubber into a Glass: Mechanical Reinforcement by Microphase Separation

Supramolecular associations provide a promising route to functional materials with properties such as self-healing, easy recyclability or extraordinary mechanical strength and toughness. The latter benefit especially from the transient character of the formed network, which enables dissipation of energy as well as regeneration of the internal structures. However, recent investigations revealed intrinsic limitations in the achievable mechanical enhancement. Here we present studies of a set of telechelic polymers with hydrogen-bonding chain ends exhibiting an extraordinarily high, almost glass-like, rubbery plateau. This is ascribed to the segregation of the associative ends into clusters and formation of an interfacial layer surrounding these clusters. An approach adopted from the field of polymer nanocomposites provides a quantitative description of the data and reveals the strongly altered mechanical properties of the polymer in the interfacial layer. These results demonstrate how employing phase separating dynamic bonds can lead to the creation of high-performance materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Rational Polymer Design of Stretchable Poly(ionic liquid) Membranes for Dual Applications

Many functional polymeric materials are inherently fragile at ambient conditions. Consequently, making them elastic and flexible is a challenging task, and such achievement is especially meaningful in a wide range of applications including separation membranes and stretchable devices. Poly(ionic liquids) (PILs), such as vinyl-imidazolium-based polymers, are known to be “brittle” functional polymers due to their “glassy” nature at ambient temperature. We herein developed a viable approach to enable glassy PILs with high flexibility and good elasticity via a rational molecular design of chemical composition and polymer architectures. The reversible addition/fragmentation chain transfer agents (RAFT-CTAs) were attached to the flexible poly(dimethylsiloxane) (PDMS) backbones. The polymerization of functional ionic liquid monomers from RAFT-CTAs provided grafted copolymers with the functional side chains, which were further cross-linked by di-functional PDMS. Poly(ethylene glycol) methacrylate is copolymerized with ionic liquid monomers to reduce the glass transition temperature (Tg), providing higher chain mobility and elasticity at ambient temperature. The synthesized elastic PIL-based membranes (E-PILs) have dramatically improved stretchability, reaching 122–422%. In addition to significantly improved extensibility, the synthesized E-PILs also exhibit higher ionic conductivity, critical for potential applications in solid-state batteries. Moreover, in comparison to glassy solid PIL membranes, the E-PILs also exhibited enhanced flexibility and excellent gas-separation performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Improved Single-Ion Conductivity of Polymer Electrolyte via Accelerated Segmental Dynamics

Single-ion conducting polymer electrolytes (SICPEs) have many advantages for solid-state battery applications, while low conductivities remain the bottleneck for their practical applications. In this paper, a strategy that can significantly improve the ionic conductivity of SICPEs based on the concept of accelerated segmental dynamics was demonstrated by the evaluation of the thermal property, rheological behavior, morphology analysis, molecular dynamics simulation, and conductivity performance. With both “soft” poly(dimethylsiloxane) (PDMS) backbone and poly(ethylene glycol) (PEG) side chains, the obtained SICPE possesses faster segmental relaxation and higher lithium-ion conductivity. With lithium “transference” number close to unity, the obtained SICPE also shows excellent electrochemical stability against lithium metal electrodes. The clear relationship established between the segmental dynamics of polymer electrolyte and its ionic conductivity should contribute to achieve a solid electrolyte with improved ionic conductivity toward the next-generation solid-state battery.

Segmental Dynamics↗
DOE OSTI2020

Anomalously high elastic modulus of a poly(ethylene oxide)-based composite electrolyte

The practical use of lithium metal anodes in solid-state batteries requires a polymer membrane with high lithium-ion conductivity, thermal/electrochemical stability, and mechanical strength. The primary challenge is to effectively decouple the ionic conductivity and mechanical strength of the polymer electrolytes. We report a remarkably facile single step synthetic strategy based on in-situ crosslinking of poly(ethylene oxide) (xPEO) in the presence of a woven glass fiber (GF). Such a simple method yields composite polymer electrolytes (CPE) of anomalously high elastic modulus up to 2.5 GPa over a broad temperature range (20 °C – 245 °C) that has never been previously documented. An unsupervised machine learning algorithm, K-mean clustering analysis, was implemented on the hyperspectral Raman mapping at the xPEO/GF interface. Using such a unique means, we show for the first time that the promoted mechanical strength originates from xPEO and GF interactions through dynamic hydrogen and ionic bonding. High ionic conductivity is achieved by the addition plasticizer (e.g. tetraglyme), where trifluoromethanesulfonate anions are tethered to the xPEO matrix and Li + cations are favorably transported through coordination with the plasticizer. Further, stringent galvanostatic cycling tests indicates the CPE can be stably cycled for >3000 h in a Li-metal symmetric cell at a moderate temperature (nearly 1500 Coulombs/cm 2 Li equivalents), outperforming most of the PEO-based electrolytes. The GF reinforced CPE reported here has multifunctional uses, such as solid electrolytes for all solid-state batteries and membranes for redox-flow batteries. Although the focus of this study is on lithium-based batteries, the results are equally promising for other alkali metal based batteries such as sodium and potassium.

25 ENERGY STORAGE↗
DOE OSTI2020

Progress of 3D network binders in silicon anodes for lithium ion batteries

Prompted by its overwhelming benefits, silicon (Si) has evolved as one of the most promising anode materials for high-capacity lithium-ion batteries (LIBs). However, some of the intrinsic drawbacks such as low ionic conductivity and inevitable volume change during the alloying/dealloying process seriously hamper the commercialization of Si-based anodes in LIBs. Among the several strategies to overcome the challenges of the Si anode, the development of designed polymeric binders is imperative for enabling stable and satisfactory performance. The improved cell performance due to the designed binders is recognized as an economical and practical approach, especially from the industrial perspective. In addition to their conventional role in integrating electrode components, binders also play a significant role in alleviating the unfavorable phenomenon of volume expansion, and ultimately stabilizing the Si anode and Si-electrolyte interphase. The polymer architecture of the binders significantly influences the binder performance, and three-dimensional (3D) network binders are generally more effective at coping with the stress resulting from the huge volume change of the Si anode. To develop advanced 3D binders, substantial research efforts have been made including various crosslinking strategies in the past decade. In this review, we focus on diverse crosslinking methods including chemical-, physical-, and topological-crosslinking for rationally designing network binders for Si anodes and take a glance at dynamic interactions to construct healable binders for long-term stability.

25 ENERGY STORAGE↗