Search NASA⌕ Search

Engineering topics

Sakamoto, Jeffrey

Publications and source records attributed to Sakamoto, Jeffrey.

At least 19 records

3-D composite anodes for Li-ion batteries with high capacity and fast charging capability

A lithium-ion battery includes an electrode with a plurality of channels formed at least partially through its thickness. Each channel has a diameter in a range from 5 μm to 100 μm and/or is spaced apart from another channel by a distance in a range from 10 μm to 200 μm as measured between centerlines of the channels. The electrode may be an anode and includes carbonaceous material such as graphite and/or additional electrochemically active lithium host materials. The battery can be charged at a C-rate greater than 2 C.

Chen, Kuan-Hung↗

Mixed ionic and electronic conductor for solid state battery

Disclosed are electrochemical devices, such as lithium ion battery electrodes, lithium ion conducting solid-state electrolytes, and solid-state lithium ion batteries including these electrodes and solid-state electrolytes. Also disclosed are methods for making such electrochemical devices. Also disclosed are composite electrodes for solid state electrochemical devices. The composite electrodes include one or more separate phases within the electrode that provide electronic and ionic conduction pathways in the electrode active material phase.

Sakamoto, Jeffrey↗

3-D composite anodes for Li-ion batteries with high capacity and fast charging capability

An anode for a lithium ion battery is disclosed includes a first major face, a second major face that, together with the first major face, defines a thickness of the anode, and at least one carbonaceous electrochemically active lithium host material distributed between the first and second major faces of the anode. The at least one carbonaceous electrochemically active lithium host material is selected from the group consisting of graphite, hard carbon, or a blend of graphite and hard carbon. The anode additionally defines a plurality of vertical channels extending at least partially through the thickness of the anode. A lithium-ion batter that includes the disclosed anode and a method of charging a lithium-ion battery that includes the disclosed anode are also disclosed.

Chen, Kuan-Hung↗

Physical and Mechano-Electrochemical Phenomena of Thin Film Lithium-Ceramic Electrolyte Constructs

While a small number of solid electrolytes exhibit high ionic conductivity (~1mS cm at 298K), few are stable against Li metal. The garnet-type solid electrolyte, based on the nominal formula Li 7 La 3 Zr 2 O 12 (LLZO), is unique in that it is a fast ion conductor and – as we demonstrated in our recent project (DE-EE-00006821) – is stable against Li. Moreover, our former project successfully demonstrated a decrease in Li-LLZO interface resistance from 12,000 to 2 Ohms cm 2 and stable cycling at 1 mA cm 2 for 100 cycles (+/- 15 µm Li per cycle). Although the past project (DE-EE-00006821) demonstrated LLZO is a viable solid electrolyte for enabling batteries using metallic Li, the studies used thick pellets (1mm) and thick anodes (~500 µm). We believe that to achieve a step increase in technology readiness level (TRL), the same performance characteristics previously shown should be demonstrated in technologically relevant cells, e.g. thin LLZO and thin Li. The goal of this project is to acquire a deep fundamental understanding of the physical and mechano-electrochemical phenomena that control the performance of cells consisting of thin LLZO (~10 µm), thin Li anodes (~20 µm) and thin solid-state composite cathodes. If successful, the knowledge gained in this project will guide closely related commercialization efforts to scale the production of LLZO-based solid-state batteries.

25 ENERGY STORAGE↗

Metal infiltrated electrodes for solid state batteries

Disclosed are electrochemical devices and methods for making electrochemical devices such as metal infiltrated electrodes for solid state lithium ion and lithium metal batteries. In one method for forming an electrode, a metal is infiltrated into the pore space of the active material of the electrode providing improved electronic conductivity to the electrode. The electrode may also include a solid-state ion conducting material providing improved ion conductivity to the electrode. Before infiltration of the metal, a stabilization coating may be applied to the active material and/or the solid-state ion conducting material to the stabilize electrode interfaces by slowing, but not eliminating, the chemical reactions that occur at elevated temperatures during sintering of the active material and/or the solid-state ion conducting material forming the electrode.

Sakamoto, Jeffrey↗

Current collector clad with lithium ion conducting solid electrolyte

An article for forming an electrochemical device is disclosed. The article comprises a metallic current collector clad with an ion conducting solid-electrolyte material such that intimate contact between the current collector and the ion conducting solid-electrolyte material is made. A lithium metal anode can be formed in situ between the current collector clad and the ion conducting solid-electrolyte material from lithium ions contained within a cathode material that is placed in contact with the ion conducting solid-electrolyte material. A bipolar electrochemical cell can be constructed from the article.

Sakamoto, Jeffrey↗

Template-based methods of making and using ceramic solids

Various embodiments relate to a method comprising forming a template from a template precursor, wherein the template contains an entrapped ceramic precursor, which can be further processed to form a ceramic solid, such as an oxide ceramic solid. In one embodiment, the template precursor is a hydrogel precursor and the template is a hydrogel template. The hydrogel template can include, for example, agarose, chitosan, alginate or a photo-initiating receptive hydrogel template such as a functionalized poly(ethylene glycol). Various devices, including electrolyte interfaces and energy storage devices, as well as thermoelectric devices are also provided. In one embodiment, the oxide ceramic solid is a cubic garnet having a nominal formula of Li7La3Zr2O12 (LLZO).

Sakamoto, Jeffrey↗

Encapsulation of high temperature thermoelectric modules

A method of encapsulating a thermoelectric device and its associated thermoelectric elements in an inert atmosphere and a thermoelectric device fabricated by such method are described. These thermoelectric devices may be intended for use under conditions which would otherwise promote oxidation of the thermoelectric elements. The capsule is formed by securing a suitably-sized thin-walled strip of oxidation-resistant metal to the ceramic substrates which support the thermoelectric elements. The thin-walled metal strip is positioned to enclose the edges of the thermoelectric device and is secured to the substrates using gap-filling materials. The strip, substrates and gap-filling materials cooperatively encapsulate the thermoelectric elements and exclude oxygen and water vapor from atmospheric air so that the elements may be maintained in an inert, non-oxidizing environment.

47 OTHER INSTRUMENTATION↗

Excellent stability of a lithium-ion-conducting solid electrolyte upon reversible Li + /H + exchange in aqueous solutions

Batteries with an aqueous catholyte and a Li metal anode have attracted interest owing to their exceptional energy density and high charge/discharge rate. The long-term operation of such batteries requires that the solid electrolyte separator between the anode and aqueous solutions must be compatible with Li and stable over a wide pH range. Unfortunately, no such compound has yet been reported. In this study, an excellent stability in neutral and strongly basic solutions was observed when using the cubic Li 7 La 3 Zr 2 O 12 garnet as a Li-stable solid electrolyte. The material underwent a Li + /H + exchange in aqueous solutions. Nevertheless, its structure remained unchanged even under a high exchange rate of 63.6%. When treated with a 2 M LiOH solution, the Li + /H + exchange was reversed without any structural change. Furthermore, these observations suggest that cubic Li 7 La 3 Zr 2 O 12 is a promising candidate for the separator in aqueous lithium batteries.

25 ENERGY STORAGE↗

Resolving the grain boundary and lattice impedance of hot-pressed Li 7 La 3 Zr 2 O 12 garnet electrolytes

Here, the cubic-stabilized garnet solid electrolyte with a nominal composition of Li 6.28 Al 0.24 La 3 Zr 2 O 12 is thoroughly characterized by impedance spectroscopy. By varying the frequency of the applied AC signal over 11 orders of magnitude for characterizations from –100 to +60 °C, the relative contributions of grain and grain boundary conduction are unambiguously resolved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and evaluation of lead telluride/bismuth antimony telluride nanocomposites for thermoelectric applications

Heterogeneous nanocomposites of p-type bismuth antimony telluride (Bi{sub 2-x}Sb{sub x}Te{sub 3}) with lead telluride (PbTe) nanoinclusions have been prepared by an incipient wetness impregnation approach. The Seebeck coefficient, electrical resistivity, thermal conductivity and Hall coefficient were measured from 80 to 380 K in order to investigate the influence of PbTe nanoparticles on the thermoelectric performance of nanocomposites. The Seebeck coefficients and electrical resistivities of nanocomposites decrease with increasing PbTe nanoparticle concentration due to an increased hole concentration. The lattice thermal conductivity decreases with the addition of PbTe nanoparticles but the total thermal conductivity increases due to the increased electronic thermal conductivity. We conclude that the presence of nanosized PbTe in the bulk Bi{sub 2-x}Sb{sub x}Te{sub 3} matrix results in a collateral doping effect, which dominates transport properties. This study underscores the need for immiscible systems to achieve the decreased thermal transport properties possible from nanostructuring without compromising the electronic properties. - Graphical abstract: PbTe nanoparticles introduced into p-type Bi{sub 2}Te{sub 3} by incipient wetness results in decreased lattice thermal conductivity, but also acts as an electronic dopant, resulting in an overall decrease in thermoelectric performance. Highlights: Black-Right-Pointing-Pointer Composites of PbTe nanoparticles in Bi{sub 2-x}Sb{sub x}Te{sub 3} were formed by incipient wetness. Black-Right-Pointing-Pointer PbTe nanoparticles leads to decreased {kappa}{sub l}, consistent with phonon scattering. Black-Right-Pointing-Pointer PbTe nanoparticles lead to decreased S and {rho}, due to increased carriers. Black-Right-Pointing-Pointer Collateral doping from PbTe leads to decreased ZT with increasing concentration. Black-Right-Pointing-Pointer Immiscible systems are preferred for improved ZT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metallization for Yb14MnSb11-Based Thermoelectric Materials

Thermoelectric materials provide a means for converting heat into electrical power using a fully solid-state device. Power-generating devices (which include individual couples as well as multicouple modules) require the use of ntype and p-type thermoelectric materials, typically comprising highly doped narrow band-gap semiconductors which are connected to a heat collector and electrodes. To achieve greater device efficiency and greater specific power will require using new thermoelectric materials, in more complex combinations. One such material is the p-type compound semiconductor Yb14MnSb11 (YMS), which has been demonstrated to have one of the highest ZT values at 1,000 C, the desired operational temperature of many space-based radioisotope thermoelectric generators (RTGs). Despite the favorable attributes of the bulk YMS material, it must ultimately be incorporated into a power-generating device using a suitable joining technology. Typically, processes such as diffusion bonding and/or brazing are used to join thermoelectric materials to the heat collector and electrodes, with the goal of providing a stable, ohmic contact with high thermal conductivity at the required operating temperature. Since YMS is an inorganic compound featuring chemical bonds with a mixture of covalent and ionic character, simple metallurgical diffusion bonding is difficult to implement. Furthermore, the Sb within YMS readily reacts with most metals to form antimonide compounds with a wide range of stoichiometries. Although choosing metals that react to form high-melting-point antimonides could be employed to form a stable reaction bond, it is difficult to limit the reactivity of Sb in YMS such that the electrode is not completely consumed at an operating temperature of 1,000 C. Previous attempts to form suitable metallization layers resulted in poor bonding, complete consumption of the metallization layer or fracture within the YMS thermoelement (or leg).

Firdosy, Samad↗

Composite Silica Aerogels Opacified with Titania

A further improvement has been made to reduce the high-temperature thermal conductivities of the aerogel-matrix composite materials described in Improved Silica Aerogel Composite Materials (NPO-44287), NASA Tech Briefs, Vol. 32, No. 9 (September 2008), page 50. Because the contribution of infrared radiation to heat transfer increases sharply with temperature, the effective high-temperature thermal conductivity of a thermal-insulation material can be reduced by opacifying the material to reduce the radiative contribution. Therefore, the essence of the present improvement is to add an opacifying constituent material (specifically, TiO2 powder) to the aerogel-matrix composites.

Paik, Jon-Ah↗