Engineering topics

Sakimoto, S. E. H.

Publications and source records attributed to Sakimoto, S. E. H..

48 records · Page 3

NASA NTRS1999

Global Geometric Properties of Martian Impact Craters: A Preliminary Assessment Using Mars Orbiter Laser Altimeter (MOLA)

Impact craters on Mars have been used to provide fundamental insights into the properties of the martian crust, the role of volatiles, the relative age of the surface, and on the physics of impact cratering in the Solar System. Before the three-dimensional information provided by the Mars Orbiter Laser Altimeter (MOLA) instrument which is currently operating in Mars orbit aboard the Mars Global Surveyor (MGS), impact features were characterized morphologically using orbital images from Mariner 9 and Viking. Fresh-appearing craters were identified and measurements of their geometric properties were derived from various image-based methods. MOLA measurements can now provide a global sample of topographic cross-sections of martian impact features as small as approx. 2 km in diameter, to basin-scale features. We have previously examined MOLA cross-sections of Northern Hemisphere and North Polar Region impact features, but were unable to consider the global characteristics of these ubiquitous landforms. Here we present our preliminary assessment of the geometric properties of a globally-distributed sample of martian impact craters, most of which were sampled during the initial stages of the MGS mapping mission (i.e., the first 600 orbits). Our aim is to develop a framework for reconsidering theories concerning impact cratering in the martian environment. This first global analysis is focused upon topographically-fresh impact craters, defined here on the basis of MOLA topographic profiles that cross the central cavities of craters that can be observed in Viking-based MDIM global image mosaics. We have considered crater depths, rim heights, ejecta topologies, cross-sectional "shapes", and simple physical models for ejecta emplacement. To date (May, 1999), we have measured the geometric properties of over 1300 impact craters in the 2 to 350 km diameter size interval. A large fraction of these measured craters were sampled with cavity-center cross-sections during the first two months of MGS mapping. Many of these craters are included in Nadine Barlow's Catalogue of Martian Impact Craters, although we have treated simple craters smaller than about 7 km in greater detail than all previous investigations. Additional information is contained in the original extended abstract.

Garvin, J. B.↗

NASA NTRS1999

Martian Polar Impact Craters: A Preliminary Assessment Using Mars Orbiter Laser Altimeter (MOLA)

Our knowledge of the age of the layered polar deposits and their activity in the volatile cycling and climate history of Mars is based to a large extent on their apparent ages as determined from crater counts. Interpretation of the polar stratigraphy (in terms of climate change) is complicated by reported differences in the ages of the northern and southern layered deposits. The north polar residual ice deposits are thought to be relatively young, based on the reported lack of any fresh impact craters in Viking Orbiter Images. Herkenhoff et al., report no craters at all on the North polar layered deposits or ice cap, and placed an upper bound on the surface age (or, alternatively, the vertical resurfacing rate) of 100 thousand years to 10 million years, suggesting that the north polar region is an active resurfacing site. In contrast, the southern polar region was found to have at least 15 impact craters in the layered deposits and cap. Plaut et al, concluded that the surface was less than or = 120 million years old. This reported age difference factor of 100 to 1000 increases complexity in climate and volatile modeling. Recent MOLA results for the topography of the northern polar cap document a handful or more of possible craters, which could result in revised age or resurfacing estimates for the northern cap. This study is a preliminary look at putative craters in both polar caps. Additional information is contained in the original extended abstract.

Sakimoto, S. E. H.↗

NASA NTRS1999

Near-Polar Cratered Cones on Mars: Mola Measurements and Implications for Volcanic Origins

Near-polar craterforms have been observed on Mars since Mariner 9. Hodges and Moore [1,2] described the implications of these apparently volcanic features and suggested that several were formed as a consequence of magma-ice or magma-water interactions. Indeed, they proposed that the feature illustrated in Fig. I represents a hydromagmatic explosion crater or maar, indicating interaction of ground-ice and/or water with magma in the higher Northern hemisphere latitudes of Mars. The advent of Mars Orbiter Laser Altimeter (MOLA) topographic information 161 for several of the putative volcanic craterforms described in [1,2] allows a reconsideration of their formation mechanisms. We have exploited MOLA's near-centerline cross-sections from the Science Phasing Orbit phase of the Mars Global Surveyor (MGS) mission to analyze the geometric properties of these features as constraints on their modes of origin and subsequent modification histories. From our preliminary analyses, we believe there is evidence these features may have been formed by effusive, lava shield building eruptions, and not hydromagmatic events. Furthermore, geometrical constraints indicate that some of the near-polar craterforms are geologically youthful.

Garvin, J. B.↗

NASA NTRS1998

Ice-Associated Impact Craters on Mars: Implications from MOLA Observations

Impact features adjacent to the permanent North Polar Cap on Mars provide a unique perspective on the crater formation and modification process. Little attention has been previously paid to the dozen's of ice-associated or 'frost-filled' craters north of 70N on Mars. We have examined Mars Orbiter Laser Altimeter (MOLA) cross-sections of 13 of these features between 7ON and 82N in an effort to understand cavity modification processes potentially associated with the advance and retreat of the North Polar ice cap. Here we treat the general geometric properties of these impact features and focus attention on one almost entirely filled example (i.e., 32 km diameter, located at 77N, 89E) for which high resolution Viking Orbiter images (50 m per pixel) provide key constraints for interpreting MOLA's meter-precision topographic measurements.

Garvin, J. B.↗

NASA NTRS1998

Topography of Impact Structures on the Northern Polar Cap of Mars

The north polar residual ice deposits of mars are thought to be relatively young, based on the reported lack of any fresh impact craters in Viking Orbiter images. A handful of possible impact features were identified, but available data were inconclusive. Determining the number and current topographic characteristics of any craters on the polar residual ice surface is important in constraining the surface age, relative importance of polar cap resurfacing processes and ice flow dynamics, and the role of the cap deposits in the global volatile and climate cycles. Subsequent image processing advances and new Mars Orbiter Laser Altimeter (MOLA) data in the north polar region are now a considerable aid in impact feature identification. This study reconsiders the abundant Viking high-resolution polar images along with the new altimetry data. We examine possible impact features, compare their topography with known mars high-latitude impact features, and use their morphology as a constraint on crater modification processes.

Sakimoto, S. E. H.↗

NASA NTRS1998

Mid-Latitude versus Polar-Latitude Transitional Impact Craters: Geometric Properties from Mars Orbiter Laser Altimeter (MOLA) Observations and Viking Images

One intriguing aspect of martian impact crater morphology is the change of crater cavity and ejecta characteristics from the mid-latitudes to the polar regions. This is thought to reflect differences in target properties such as an increasing presence of ice in the polar regions. Previous image-based efforts concerning martian crater morphology has documented some aspects of this, but has been hampered by the lack of adequate topography data. Recent Mars Orbiter Laser Altimeter (MOLA) topographic profiles provide a quantitative perspective for interpreting the detailed morphologies of martian crater cavities and ejecta morphology. This study is a preliminary effort to quantify the latitude-dependent differences in morphology with the goal of identifying target-dependent and crater modification effects from the combined of images and MOLA topography. We combine the available MOLA profiles and the corresponding Viking Mars Digital Image Mosaics (MDIMS), and high resolution Viking Orbiter images to focus on two transitional craters; one on the mid-latitudes, and one in the North Polar region. One MOLA pass (MGS Orbit 34) traverses the center of a 15.9 km diameter fresh complex crater located at 12.8degN 83.8degE on the Hesperian ridge plains unit (Hvr). Viking images, as well as MOLA data, show that this crater has well developed wall terraces and a central peak with 429 m of relative relief. Three MOLA passes have been acquired for a second impact crater, which is located at 69.5degN 41degE on the Vastitas Borealis Formation. This fresh rampart crater lacks terraces and central peak structures and it has a depth af 579 m. Correlation between images and MOLA topographic profiles allows us to construct basic facies maps of the craters. Eight main units were identified, four of which are common on both craters.

Matias, A.↗

NASA NTRS1998

Martian Polar Region Impact Craters: Geometric Properties From Mars Orbiter Laser Altimeter (MOLA) Observations

The Mars Orbiter Laser Altimeter (MOLA) instrument onboard the Mars Global Surveyor (MGS) spacecraft has so far observed approximately 100 impact landforms in the north polar latitudes (>60 degrees N) of Mars. Correlation of the topography with Viking Orbiter images indicate that many of these are near-center profiles, and for some of the most northern craters, multiple data passes have been acquired. The northern high latitudes of Mars may contain substantial ground ice and be topped with seasonal frost (largely CO2 with some water), forming each winter. We have analyzed various diagnostic crater topologic parameters for this high-latitude crater population with the objective of characterizing impact features in north polar terrains, and we explore whether there is evidence of interaction with ground ice, frost, dune movement, or other polar processes. We find that there are substantial topographic variations from the characteristics of midlatitude craters in the polar craters that are not readily apparent from prior images. The transition from small simple craters to large complex craters is not well defined, as was observed in the midlatitude MOLA data (transition at 7-8 km). Additionally, there appear to be additional topographic complexities such as anomalously large central structures in many polar latitude impact features. It is not yet clear if these are due to target-induced differences in the formation of the crater or post-formation modifications from polar processes.

Garvin, J. B.↗

NASA NTRS1998

MOLA Topography of Impact Basins in the Northern Hemisphere of Mars

Coverage of the northern hemisphere of Mars by the Mars Orbiter Laser Altimeter (MOLA) during the aerobraking hiatus and the two Science Phasing Operation periods provides improved definition and characterization of large impact basins. Gridded MOLA data show the Utopia Basin has a pronounced bowl-like structure, as opposed to the interior rises suggested by the earlier USGS DEM. The elevation structure is concentric about the basin center as mapped by McGill. In particular, the proposed inner ring closely follows the -4 km contour over much of the southern, western and northwestern sides. Higher topography along portions of the dichotomy boundary aligns with the basin's outer ring. High topography in the polar region also occurs where the outer ring should lie, raising the possibility that perhaps some of the polar topography is due to basin structure as well as ice. Two MOLA passes near Phison Rupes provide evidence for a large "stealth" hole where Viking imagery show little evidence of any major structure. The 2 km deep, 600 km wide depression at 31OW, 3ON is as large as the Cassini impact basin 1000 km to the SW. While Cassini is easily recognized in image data, the "MOLA Hole" is not. If this depression is a deeply eroded and buried impact basin (as perhaps suggested by a decrease in the crater density and somewhat smoother terrain than in adjacent areas), it is not clear why it has managed to maintain its great depth. In Tempe at the dichotomy boundary a 300 km wide impact basin is revealed by pronounced bowl-like topography centered at 87W, 47N, even though only about 1/3 of the basin rim structure is obvious. The basin lies on a sloping boundary zone, with the more buried N rim up to 2 km below the rugged S rim. A similar N-S asymmetry in basin ring structure occurs for the much larger Isidis Basin, where the S rim rises 6 km but the subdued N rim rises barely 2 km above the floor. There is essentially no topographic expression of the main ring in the NE quadrant of Isidis where, if it exists, it lies below Hesperian-age plains.

Frey, Herbert↗

NASA NTRS1998

Martian Polar Region Impact Craters: Topographical Perspectives from the Mars Orbiter Laser Altimeter

The Mars Orbiter Laser Altimeter (MOLA) has acquired over 100 topographic cross-sections of impact landforms in the polar regions of Mars as part of Mars Global Surveyor (MGS) Science Phasing Orbit observations during the period from April to July, 1998. These MOLA topographic profiles offer the first three-dimensional perspectives of high latitude craters on Mars yet available, and provide evidence of landform geometries not previously recognized. Indeed, the relatively poor quality of Viking Orbiter images of many high northern latitude regions has allowed the MOLA data to provide insights into the cavities and ejecta topologies of non-degraded impact landforms that have clearly experienced interactions with condensates, either as part of their formation, or as a post-modification stage effect. Here we report a preliminary summary of the results associated with topographic measurements for a statistically significant population of impact features all of which lie north of 60N latitude. MOLA sampled four impact features with frost-related interior deposits, including the 81 km (diameter) Korolev feature. In several cases, there is evidence from near-centerline MOLA cross-sections of crater interior features (i.e., central peak or ice-dust deposits) that are anomalously large relative to the crater cavity. Central structures that make up more than 50% of the volume of a crater cavity are observed, suggesting that either substantial accumulation of mantling materials has occurred, or that crater excavation triggered production of volume-enhancing materials (ice?). Pedestal craters sampled by MOLA also attest to enhanced production of ejecta materials in high latitude terrains. For example, many of the pedestal craters suggest a volume of ejecta (Ve) to volume of cavity (Vc) ratio far in excess of 1.0 (i.e., over 3.0), even in cases where the floor of the cavity appears unfilled. Finally, the well-defined transitions between simple and complex craters observed in MOLA data for non-polar latitude impact features is not preserved at high northern latitudes (for non-degraded craters). This further suggests the role of target materials (i.e., frozen volatiles?) in the cratering process on Mars in such regions.

Garvin, J. B.↗

NASA NTRS1995

The Spreading of Variable-Viscosity Axisymmetric Radial Gravity Currents: Applications to the Emplacement of Venusian 'Pancake' Domes

The Magellan images of Venus have revealed a number of intriguing volcanic features, including the steep-sided or 'pancake' domes. These volcanic domes or flows have morphologies that suggest formation by a single continuous emplacement of lava with a higher viscosity than that of the surrounding basaltic plains. Numerous investigators have suggested that such high viscosity is due to high silica content, leading to the conclusion that the domes are evidence of evolved magmatic products on Venus. However, viscosity depends on crystallinity as well as on silica content: high viscosity could therefore also be due to a cooler (and therefore higher crystal content) lava. Models of dome emplacement which include both cooling and composition factors are thus necessary in order to determine the ranges of crystallinity and silica content which might lead to the observed gross dome morphologies. Accordingly, in this study domes are modelled as radial viscous gravity currents with an assumed cooling-induced viscosity increase to include both effects. Analytical and numerical results indicate that pancake dome formation is feasible with compositions ranging from basaltic to rhyolitic. Therefore, observations of gross dome morphology alone are insufficient for determining composition and the domes do not necessarily represent strong evidence for evolved magmatism on Venus.

Sakimoto, S. E. H.↗

NASA NTRS1993

Venus pancake dome formation: Morphologic effects of a cooling-induced variable viscosity during emplacement

The distinctive steep-sided 'pancake' domes discovered in the Magellan images of Venus have morphologies that suggest formation by a single continuous emplacement of a high viscosity magma. A resemblance of the venusian domes to much smaller terrestrial rhyolite and dacite volcanic domes has prompted some authors to suggest that the domes on Venus also have high silica compositions and thus, high viscosities. However, viscosity is a function of crystallinity as well as silica content in a magma, and thus increases as a result of magmatic cooling. To investigate the effect of a cooling-induced viscosity increase on dome morphology, we have modeled the domes as radial viscous gravity currents that cool during emplacement. Various aspects of the investigation are discussed.

Sakimoto, S. E. H.↗

NASA NTRS1992

The effects of Venus' thermal structure on buoyant magma ascent

The recent Magellan images have revealed a broad spatial distribution of surface volcanism on Venus. Previous work in modeling the ascent of magma on both Venus and Earth has indicated that the planetary thermal structure significantly influences the magmatic cooling rates and thus the amount of magma that can be transported to the surface before solidification. In order to understand which aspects of the thermal structure have the greatest influence on the cooling of ascending magma, we have constructed magma cooling curves for both plutonic and crack buoyant ascent mechanisms, and evaluated the curves for variations in the planetary mantle temperature, thermal gradient curvature with depth, surface temperature gradient, and surface temperature. The planetary thermal structure is modeled as T/T(sub 0) = 1-tau(1-Z/Z(sub 0)(exp n), where T is the temperature, T(sub 0) is the source depth temperature, tau = 1-(T(sub s)/T(sub 0)) where T(sub s) is the planetary surface temperature, Z is the depth, Z(sub 0) is the source depth, and n is a constant that controls thermal gradient curvature with depth. The equation is used both for mathematical convenience and flexibility, as well as its fit to the thermal gradients predicted by the cooling half-space models. We assume a constant velocity buoyant ascent, body-averaged magma temperatures and properties, an initially crystal-free magma, and the same liquidus and solidus for both Venus and Earth.

Sakimoto, S. E. H.↗