Engineering topics

Samuel Gaylin

Publications and source records attributed to Samuel Gaylin.

3 records

NASA NTRS2019

Development of the WFIRST CGI Integral Field Spectrograph

The principal science goal of directly imaging exoplanets is spectroscopy. Future mission concepts such as LU- VOIR and HabEx have baselined their science instruments to use an integral field spectrograph (IFS) to maximize observing efficiency. Coronagraphic imaging with an IFS has strong heritage at ground observatories, having produced planet and brown dwarf near-infrared spectra at contrast floors as low as high 1 × 10-6 levels. As a technology demonstration for future missions the WFIRST coronagraph instrument (CGI) will demonstrate the ability to measure spectra in visible light with at contrast levels sufficient for detecting Earth-like planets. The spectrograph was originally meant to match that of future missions; an independent IFS channel for wavefront control and imaging spectroscopy. Due to a series of de-scopes as the project progressed, the baseline spectroscopic capability of CGI is no longer an IFS but a zero deviation optical prism and slit used in conjunction with the direct imaging camera. Regardless, CGI advanced a lenslet IFS through the preliminary design phase of a flight project. Here we present that development as the challenges and requirements of an IFS for coronagraphy are quite unique and relevant to future missions. With that development in place, we also present the initial design of the zero optical deviation prism, highlighting the relative challenges and performance of each concept.

Tyler D Groff↗

NASA NTRSDate not supplied

WFIRST CGI: Prism and Polarizer Characterization Modes

As part of its technology demonstration, the WFIRST coronagraph instrument (CGI) will demonstrate point source spectroscopy and polarization measurements of disks. The specific implementation of spectroscopy is a zero-deviation Amici prism and slit to be placed on the planet after high contrast has been achieved by CGI. The polarization optics are a set of Wollaston prisms so that orthogonal polarization states can be measured simultaneously. The CGI spectral characterization mode, being designed and built and Goddard Space Flight Center (GSFC), has a spectral resolution of R50 and is designed to accommodate a 15% bandpass spanning 610-785nm. In order to recover Stokes information, there are two sets of Wollaston prisms clocked 45 degrees with respect to one another with each measurement taken in series. The Wollaston design and optical elements are a contribution by the Japanese Aerospace Exploration Agency, with final alignment and testing being done at GSFC. The spectroscopy mode is designed to target Methane absorption features around 730nm, keeping the spectral resolution as low as possible to improve the signal-to-noise ratio and hence reduce detection time. We highlight the requirements for these modes and address the challenge of on-orbit spectral calibration for a deployable slit in the presence of pointing drifts. Of unique interest is how the observatory error budget couples into good stellar spectrum calibration and subsequent speckle subtraction. We also provide further detail on the optomechanical design, its stability based on thermal and structural predictions, modeled performance, and operations concept. These performance metrics are simulated to demonstrate how a slit located at an arbitrary field point is homed onto the planet and converted to a calibrated spectrum.

Tyler D Groff↗

NASA NTRSDate not supplied

The WFIRST CGI Integral Field Spectrograph: Requirements and Performance Predictions

The WFIRST coronagraphic instrument (CGI) will demonstrate exoplanet spectroscopy using an integral field spectrograph (IFS). The CGI IFS, being designed and built at Goddard Space Flight Center, has a spectral resolution of R50 and is designed to accommodate a 20% bandpass spanning 600- 970 nm. The IFS is principally targeting the abundance of Methane features, with the primary coronagraph band being centered around 770nm. Key to the performance estimates are the achievable signal-to-noise (SNR) ratios and the stability of the microspectra over the course of tens and hundreds of hours. As a technology demonstration for CGI, the ability to close a wavefront control loop around the IFS, maintain a stable dark hole, and provide time resolved data that simultaneously spans spatial and spectral dimensions are crucial demonstrations for future observatories. The IFS is optimized both for coronagraphs and science observations with a potential future starshade. We highlight how the long duration observations, and requirements for both starshades and coronagraphs drive the IFS requirements and the calibrations required both onorbit and on the ground. We also provide further detail on the optomechanical design, its stability based on thermal and structural predictions, anticipated performance, and operations concept of the CGI IFS. The impact of these performance metrics are projected into simulated data products, demonstrating cube extraction of noisy images and the subsequent planet spectrum that can be extracted from them. These demonstrations and performance predictions are key to future missions such as LUVOIR and HabEx, whose principal science case relies on efficient spectroscopy of exoplanets.

Tyler Groff↗