Search NASA⌕ Search

Engineering topics

Samuel Leblanc

Publications and source records attributed to Samuel Leblanc.

Sky-Scanning Sun-Tracking Airborne Radiometer (3STAR): Instrument Design, Flight Testing, and Tracking Performance

The Sky-Scanning, Sun-Tracking Airborne Radiometer (3STAR) adapts commercial radiometer technology developed for the ocean color research community to airborne measurement of spectrally resolved solar irradiance and sky radiance. These atmospheric observations are used to derive aerosol optical depth (AOD), supporting localized AOD inputs for atmospheric correction of satellite and airborne data over terrestrial and aquatic (including optically dark) targets. The ability to regionally “tune” atmospheric correction schemes with relevant spatial AOD supports constraining atmospheric correction of remote sensing reflectance. Very wide dynamic range has been achieved for multi-channel band-pass-filter-radiometers originally designed for deployment into the water column. By actively tracking and directly pointing to the Sun, the light attenuation by aerosol particles in the atmospheric column can be quantified. These measurements improve knowledge of atmospheric constituents and the atmospheric corrections required to improve remote sensing capabilities for interpreting reflectance measurements from the Earth surface. 3STAR incorporates a custom Sun-tracking/sky-scanning pointing head, a Sun-tracking camera, and a commercially available, cylindrical, 19-channel radiometer tube assembly. An accurate and responsive mount and tracking system has been developed and certified to NASA and Naval Air Systems Command (NAVAIR) airworthiness standards for deployment into the aircraft slipstream. Ground and flight testing indicate typical tracking errors of less than 0.1 degrees, well within the field of view of the radiometer as required to minimize measurement uncertainty from alignment error. Preliminary AOD measurements compare to within 0.013 with 15 measurements from an Aerosol Robotic Network (AERONET) Cimel instrument at 500 nm wavelength and low solar angle.

Atmosphere↗

Above-Cloud Aerosol Radiative Effects based on ORACLES 2016 and ORACLES 2017 Aircraft Experiments

Determining the direct aerosol radiative effect (DARE) of absorbing aerosols above clouds from satellite observations alone is a challenging task, in part because the radiative signal of the aerosol layer is not easily untangled from that of the clouds below. In this study, we use aircraft measurements from the NASA ObseRvations of CLouds above Aerosols and their intEractionS (ORACLES) project in the southeastern Atlantic to derive it with as few assumptions as possible. This is accomplished by using spectral irradiance measurements (Solar Spectral Flux Radiometer, SSFR) and aerosol optical depth (AOD) retrievals (Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research, 4STAR) during vertical profiles (spirals) that minimize the albedo variability of the underlying cloud field – thus isolating aerosol radiative effects from those of the cloud field below. For two representative cases, we retrieve spectral aerosol single scattering albedo (SSA) and the asymmetry parameter (g) from these profile measurements and calculate DARE given the albedo range measured by SSFR on horizontal legs above clouds. For mid-visible wavelengths, we find SSA values from 0.80 to 0.85 and a significant spectral dependence of g. As the cloud albedo increases, the aerosol increasingly warms the column. The transition from a cooling to a warming top-of-aerosol radiative effect occurs at an albedo value (critical albedo) just above 0.2 in the mid-visible wavelength range. In a companion paper, we use the techniques introduced here to generalize our findings to all 2016 and 2017 measurements and parameterize aerosol radiative effects.

Cloud aerosol↗

Identifying Chemical and Optical Smoke Signatures in Suborbital Observations to Improve Model Projections

Biomass Burning (BB) fires are expected to occur more frequently in the future due to climate change, the build‐up of fuels due to fire suppression, and the expansion of the wildland‐urban interface [Schoennagel et al., 2017; Shivdenko & Schepaschenko, 2013; Stevens et al., 2014; Turner et al., 2019; Yue et al., 2015; Tilman et al., 2001]. Accurate knowledge of the abundance, distribution, and optical properties of absorbing aerosols such as BB smoke is essential to understanding regional and global aerosol radiative effects [Boucher et al., 2013]. It is recognized that differing fuel types (e.g., rice straw, ponderosa pine), combustion modes (i.e., flaming, smoldering or both) and temperature/ moisture content produce smoke with differing optical characteristics (e.g., aerosol light scattering and absorption) and component mixing ratios [e.g., BC, OC and inorganic species such as sulfate, potassium, chloride; Streets et al. 2003; Reid et al., 2005a, b; Janhäll et al., 2010; Sayer et al., 2014]. However, climate models often ascribe a fixed set of emission factors [i.e., amount of particulate for a given species released in the atmosphere per unit dry fuel burned; Darmenov and Dasilva, 2013] and optical properties [Hess et al., 1998] to all BB aerosol plumes, inherently limiting accurate representation of the global and regional heterogeneity of BB. The overarching goal of the proposed work is to improve the microphysical and optical representation of different types of Biomass Burning in Chemistry Transport Models. Our strategy is to capitalize on multiple airborne campaigns (e.g., ARCTAS, SEAC4RS, ORACLES, FIREX-AQ), which sampled different types of BB plumes at different aging stages. Models, when improved and combined with satellite, airborne, and ground observations will help address many aerosol science objectives from the NASA Decadal survey [National Academies of Sciences, Engineering, and Medicine. 2018].

Meloe Shenandoah F Kacenelenbogen↗

Aerosol Above Cloud Optical Depth in the Southeast Atlantic and Its Use in Continuity NASA Products

When aerosol overlie bright clouds, their radiative impact on the incident light can be either positive or negative. This difference in radiative impact promotes difficulties in remote sensing aerosol properties, which have shown biases in aerosol optical depth (AOD) retrievals when clouds are underneath. To better constrain this quantity, we have measured aerosols above clouds over the course of 3 years in the southeast Atlantic as part of the ObseRvations of CLouds above Aerosols and their intEractionS (ORACLES). These directly measured AOD above clouds are used to build and improve upon the current Near-Real-Time MODACAERO algorithm for above cloud AOD from MODIS, into a continuity product for NASA EOS/SNPP/JPSS. Here we present a summary of the above cloud aerosol optical depth measured during ORACLES, and that will be used for porting the MODACAERO algorithm to the continuity product. We use aerosol optical depth measured directly from sunlight attenuation using the Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR) and compare it to the active remote sensing, High Spectral Resolution Lidar-2 (HSRL-2). We present a combination of all 3 years of measurements during peak biomass burning season. We have observed average above cloud aerosol optical depth at 500 nm ranging from 0.28 to 0.37, with the maximum in August 2017. We emphasize the use of improved aerosol absorption and scattering models based on airborne measurements during ORACLES.

aerosol optical depth (AOD)↗

Use of Aerosol Observations From Aircraft in Satellite Remote Sensing and Modelling Comparisons

Aerosol extensive and intensive properties vary throughout the world and remain one of the largest uncertainties in determining future climate both because of difficulties in their measurement and their modelled behaviors. Here we highlight the contributions of airborne sampling by the sunphotometer 4STAR (Spectrometers for Sky-Scanning Sun Tracking Atmospheric Research) from two different parts of the world; Korean peninsula and region during the KORUS-AQ experiment (KORean-US Air Quality in May-June 2016) and over the South East Atlantic during ORACLES (ObseRvations of CLouds above Aerosols and their intEractionS in August-September-October 2016, 2017, and 2018) field campaign. The high temporal and spatial resolution, afforded by airborne sampling during KORUS-AQ, are used to determine the variability of aerosol intensive and extensive properties, which is a metric than can be compared in between multiple different observations and models, even over varying surfaces and spanning multiple different aerosol emission sources. We show the consistency over spatial scales of the AOD (Aerosol Optical Depth), and the aerosol intensive properties (Angstrom exponent - AE, fine mode fraction - FMF) observed by 4STAR, GOCI (Geostationary Ocean Color Imager Yonsei aerosol retrieval v2), MERRA-2 reanalysis (Modern-Era Retrospective Analysis for Research and Applications, v2), and from airborne in situ aerosol optical measurements by LARGE (NASA Langley Aerosol Research Group Experiment). The majority of AODs due to fine mode aerosol is observed at altitudes lower than 2 km and is dependent on the prevailing meteorological conditions. AE and FMF are found to be more spatially variable than AOD during all of KORUS-AQ, even when accounting for potential sampling biases. This may indicate that microphysical processes like aerosol particle formation, growth, and coagulation impact the dominant aerosol size at shorter scales than their combined effect on the aerosol optical depth by the aerosol emission, transport, and removal. Averaging between measurements and model, the distance at which the correlation to itself is reduced by 15% is 65 km for AOD, and 22.7 km for AE. Vertically resolved measurement from an aircraft enable the direct measurements of aerosols overlying clouds. When aerosol overlie bright clouds, their radiative impact on the incident light can be either positive or negative. This difference in radiative impact promotes difficulties in remote sensing aerosol properties, which have shown biases in AOD retrievals when clouds are underneath. The AOD above clouds measured by 4STAR during ORACLES are used to build and improve upon the current Near-Real-Time MODACAERO algorithm for above cloud AOD from MODIS, into a continuity product for NASA EOS/SNPP/JPSS.

Aerosol↗