Search NASA⌕ Search

Engineering topics

Sarah Bedka

Publications and source records attributed to Sarah Bedka.

7 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Impact of COVID-19-related Air Traffic Reductions on the Coverage and Radiative Effects of Linear Persistent Contrails over Conterminous United States and Surrounding Oceanic Routes

The radiative effects of the large-scale air traffic slowdown during Apr and May 2020 due to the international response to the COVID-19 pandemic are estimated by comparing the coverage (CC), optical properties, and radiative forcing of persistent linear contrails over the conterminous United States and two surrounding oceanic air corridors during the slowdown period and a similar baseline period during 2018 and 2019 when air traffic was unrestricted. The detected CC during the slowdown period decreased by an area-averaged mean of 41% for the three analysis boxes. The retrieved contrail optical properties were mostly similar for both periods. Total shortwave contrail radiative forcings during the slowdown were 34 and 42% smaller for Terra and Aqua, respectively. The corresponding differences for longwave contrail radiative forcing were 33% for Terra and 40% for Aqua. To account for the impact of any changes in the atmospheric environment between baseline and slowdown periods on detected CC amounts, the contrail formation potential (CFP) was computed from reanalysis data. In addition, a filtered CFP (fCFP) was also developed to account for factors that may affect contrail formation and visibility of persistent contrails in satellite imagery. The CFP and fCFP were combined with air traffic density data to create empirical models that estimated CC during the baseline and slowdown periods and were compared to the detected CC. The models confirm that decreases in CC and radiative forcing during the slowdown period were mostly due to the reduction in air traffic, and partly due to environmental changes.

contrails↗
NASA NTRSDate not supplied

TPSAS-NF1676L-32467-DND

With the launch of a new generation of Geostationary satellites (GEO) such as Himawari and GOES-16 & 17, cloud detection using satellite imager data has been greatly enhanced with increased spectral bands, and higher temporal and spatial resolutions. A concern for all geostationary sensors, however, are changes in instrument sensitivity and algorithm performance at different viewing for daytime and nighttime. CALIPSO lidar observations provide a valuable reference for assessing these impacts as the satellite flies in a sun-synchronous orbit and crosses a wide range of GEO viewing angles each day. This paper will present the cloud mask results using the imager data from Himawari (AHI) and GOES-16&17 (ABI). The detection algorithms have been adapted from the Cloud and Earth’s Radiant Energy System (CERES) MODIS Edition 4 cloud mask, and adjusted and tuned to geo-satellites. They are used operationally for the CERES Time and Space Averaging (TISA) gridded cloud products and for near-real-time retrievals for weather and nowcasting applications.

Qing Z. Trepte↗
NASA NTRSDate not supplied

Development of a Consistent Cross-Platform GEO-Satellite Cloud Mask to Support CERES

Geostationary satellites provide continuous cloud and meteorological observations over a fixed portion of the Earth’s surface, allowing them to monitor the movement of storm systems and their diurnal variation. For climate studies, geostationary observations provide valuable insight of cloud formation and evolution and how they influence the Earth’s radiation budget. The Geo-Satellite Edition 4 cloud mask (GEO Ed4) is used operationally in NASA’s Cloud and Earth’s Radiant Energy System (CERES) project to help account for diurnal variations in cloudiness on Earth’s radiation budget. The Ed4 cloud mask was applied to imager data on MSG (MeteoSat Second Generation), Himawari, GOES-West, and GOES-East satellites using as much spectral information as possible. That approach led to some discontinuities when a more modern satellite replaced an older satellite with less spectral information. A different strategy is being investigated for the CERES GEO Ed5 cloud mask that only uses spectral channels common on every satellite. Thus, a 3-channel (0.6, 3.9, 11 µm) algorithm for daytime cloud detection, and a 2-channels (3.9 and 11 µm) algorithm for nighttime cloud detection have been implemented and tested for Ed5. The goal of Ed5 cloud mask is to achieve global cloud amount consistency across five geo-satellites, and a smooth transition from an old satellite to a new satellite over each geo-location. This paper compares cloud mask results between Ed4 and a preliminary Ed5 version over the GOES-East region, using GOES-8, GOES-13, and GOES-16 satellites, each with a different spectral channel complement. Instantaneous and monthly regional mean inter-comparisons are performed and evaluated with CALIPSO cloud products to assess the accuracy and consistency of the Ed5 approach relative to that taken in Ed4. Results will be presented and discussed at the conference.

clouds↗
NASA NTRSDate not supplied

Development of a Consistent GEOsat Cloud Property Dataset for the CERES Climate Data Record

Cloud properties are critical for understanding the Earth’s radiation budget and cloud feedbacks. At NASA Langley Research Center, the Satellite ClOud and Radiative Property retrieval System (SatCORPS) provides real-time and historical analyses of clouds derived from Geostationary satellite (GEOsat) data for weather and climate applications. For the Clouds and the Earth’s Radiant Energy System (CERES) program, the global constellation of GEOsats has been analyzed since 2000 to help characterize and account for the diurnal cycle of clouds and their radiative impacts in the CERES climate data record. Obtaining consistent cloud properties over the GEOsat data record during the CERES era is a major objective but a significant challenge considering the diversity of imaging capabilities deployed during that time. The GEOsat data analysis approach for the current CERES Edition-4 (Ed4) data products was focused on accuracy and consistency with MODIS by employing as much spectral information as possible from each satellite. However, the inconsistent use of spectral information across GEOsats led to marked discontinuities in the spatial and temporal record of cloud properties that had to be accounted for post facto in downstream CERES processing. This paper reports progress in developing a new GEOsat analysis system for the next CERES edition (Ed5) that has potential to improve cross-platform consistency and continuity. In this approach, the spectral channel complement is limited to just 3-channels during daytime, ~0.65 µm (VIS), ~3.9 µm (NIR), and ~10.8 µm (IR), common to nearly all of the satellites in the record. At night, a 2-channel approach is taken with the NIR and IR, and ~6.7 µm bands that includes a machine learning approach for optically thick cloud properties. A tradeoff is the potential for reduced accuracy particularly using data from the more advanced satellites that have more spectral channels (e.g. SEVIRI, AHI and ABI) that are known to help improve thin cirrus detection, cloud-aerosol discrimination and estimates in other difficult conditions that challenge cloud remote sensing. The new continuity approach is applied to one month of global GEOSat data for each year of the CERES record since 2000 and compared with the Ed4 GEO and MODIS cloud property time series in order to evaluate the level of improved consistency in the GEOsat record and to assess the accuracy impacts. Cloud fraction will also be assessed with CALIPSO data. Outstanding issues and challenges will be discussed. The results are expected to guide future work needed to develop a more robust GEOsat cloud data record for CERES.

CERES CDR↗
NASA NTRSDate not supplied

A 3-Channel Algorithm for Retrieving Spatially and Temporally Continuous Cloud Properties Across Different Geostationary Satellite Imagers

Cloud property retrieval algorithms for passive satellite imagers are generally designed to take advantage of all the useful spectral information available for a particular satellite. This strategy optimizes accuracy and reduces misidentification and retrieval biases, particularly for modern satellites with many spectral channels. However, the application of dissimilar algorithms tailored for different satellite sensor scan present a problem within the climate data record (CDR). Algorithm inconsistencies can introduce artificial trends in the CDR that are tied to instrument changes rather than physical changes, especially when older satellites with limited spectral information are included. The NASA CERES (Clouds and the Earth’s Radiant Energy System) data record provides global cloud property retrievals across 23 years and more than 25 satellites. With the goal of producing a spatially and temporally continuous record of cloud properties, the CERES cloud working group has developed algorithms that use only 3 channels that are common to most geostationary satellite imagers: 0.65, 3.9, and 10.8 μm.

Sarah Bedka↗
NASA NTRSDate not supplied

Machine Learning Application for Improving Cloud Detection and Phase Determination Over Sunglint Regions for Geostationary Satellites

Cloud detection and phase determination over sunglint regions has been a challenge, especially for geostationary (GEO) satellites. Sunglint is observed when the sunlight specular reflection is at the same viewing angle of the satellite sensor. This intense reflection in the visible channels (VIS) is often comparable to that from optically thick clouds. It also contaminates the shortwave infrared channels (SWIR). Consequently, VIS and SWIR channels become less useful - or not useful- when they are saturated, hampering the detection of cloudy and clear-sky pixels. Sunglint contamination happens frequently and exists nearly in every daytime GEO full disk satellite images. However, sunglint intensity and region are difficult to model due to variable viewing geometry and ocean surface conditions. Moreover, existing physical models do not meet the accuracy required for operational GEO satellite cloud detection. We developed a machine learning algorithm to improve cloud detection in sunglint conditions for the NASA Langley’s Satellite ClOud and radiation Property retrieval System (SatCORPS). This poster presents our recent progress in the algorithm development, validation and applications. The algorithm is validated using collocated SatCORPS GOES-East and GOES-West cloud products. We demonstrate that the machine learning cloud detection in sunglint regions is superior to the traditional approach by improving temporal consistency between sunglint and non-sunglint conditions.

Machine Learning, Cloud detection, Sunglint, SatCO↗