Search NASA⌕ Search

Engineering topics

Saraidaridis, James D.

Publications and source records attributed to Saraidaridis, James D..

Crossover Flux and Ionic Resistance Metrics in Polysulfide-Permanganate Redox Flow Battery Membranes

A survey of 23 commercially available cation exchange membranes was performed for the downselection of membranes for use in a polysulfide-permanganate redox flow battery (pS-Mn RFB). The survey measured the flux of permanganate ions across a 0.1 mol L −1 concentration gradient as well as the membrane resistance in a 0.5 mol L −1 sodium chloride solution. The membranes exhibited the characteristic flux/resistance trade-off observed in most classes of membranes. To connect the individual membrane testing to how the membranes will perform in a device, cell performance data in a pS-Mn RFB was collected for three membranes from the survey. The coulombic, voltaic, and energy efficiency at low cycle counts aligned with the predictions from the membrane flux and resistance survey results. The study also identified three membranes—Fumapem F-930-RFS, Fumapem FS-715-RFS, and Aquivion E98-09S—that outperformed most other membranes regarding their position on the flux-resistance trade-off curve, indicating them to be good candidates for further testing.

Electrochemistry↗

Condensation-based redox flow battery rebalancing

In a redox flow battery (RFB), the base solvent of the electrolytes tends to migrate across the barrier layer from one electrode toward the other. This can result in a volume and concentration imbalance between the electrolytes that is detrimental to battery efficiency and capacity. Compatible electrolytes can be mixed to rebalance the system, but for incompatible electrolytes mixing is not a viable option. To this end, the RFB herein includes a separator that recovers base solvent from the vapor phase of one of the electrolytes and returns the recovered base solvent to the other electrolyte to thereby reverse the imbalance.

Saraidaridis, James D.↗

Alkaline manganese redox flow battery with inhibitor

A redox flow battery includes a redox flow cell and a supply and storage system external of the redox flow cell. The supply and storage system includes first and second electrolytes for circulation through the redox flow cell. The first electrolyte is a liquid electrolyte having electrochemically active manganese species with multiple, reversible oxidation states in the redox flow cell. The electrochemically active manganese species may undergo reactions that cause precipitation of manganese oxide solids. The first electrolyte includes an inhibitor that limits the self-discharge reactions. The inhibitor includes an oxoanion compound.

Davenport, Timothy↗

The Influence of Current Density on Transport of Vanadium Acetylacetonate through a Cation-Exchange Membrane

Fluxes of negatively charged, neutral, and positively charged vanadium acetylacetonates through the cation-exchange membrane Nafion® 211 were measured as functions of current density. Fluxes increase in order V(C 5 H 7 O 2 ) 3 – < V(C 5 H 7 O 2 ) 3 0 < V(C 5 H 7 O 2 ) 3 + as expected for a membrane with fixed negative charges. Furthermore, the dependence of these fluxes on current density is quantitatively consistent with predictions made using independently measured conductivities in Nernst-Planck-Einstein transport equations. However, differences between the three fluxes are smaller than predicted by Donnan equilibrium calculations for Nafion 211 immersed in V(C 5 H 7 O 2 ) 3 solutions. Furthermore, specific interactions between sorbed species appear to be responsible for the relatively rapid transport of V(C 5 H 7 O 2 ) 3 – compared to V(C 5 H 7 O 2 ) 3 + .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redox flow battery with improved efficiency

A method for a redox flow battery includes using a cell of a redox flow battery to store electrical energy and discharge the stored electrical energy. The using includes circulating a first electrolyte solution through a first circulation loop in fluid connection with the first electrode of the cell; circulating a second electrolyte solution through a second circulation loop in fluid connection with the second electrode of the cell; and at least one of a first element from the first electrolyte solution in the first electrode permeates through the separator layer and precipitates as a first solid product in the second electrode and a second element from the second electrolyte solution permeates through the separator layer and precipitates a second solid product in the first electrode. The method also includes removing at least a portion of the first solid product or the second solid product from the first electrode and the second electrode, respectively.

25 ENERGY STORAGE↗

Bismuth Electrocatalyst Enabling Reversible Redox Kinetics of a Chelated Chromium Flow Battery Anolyte

Metal electrocatalysts have been reported to improve the electron transfer kinetics of aqueous redox flow battery electrolytes on various types of carbon electrodes. In this work, we electrodeposited bismuth metal onto a carbon paper anode of a redox flow battery containing our previously reported polyaminocarboxylate-chelated chromium electrolyte. Depositing 0.58 mg cm –2 of bismuth metal enabled an electrochemically reversible electron transfer for the Cr(II)/Cr(III) couple, resulting in a 3.9% voltage efficiency increase over ten cycles at 100 mA cm –2 across an 80% state of charge window, while maintaining >99% current efficiency. The bismuth electrocatalyst provided other improvements, such as a 13% increase in average discharge power density when cycling at 80% energy efficiency, along with a 60% decrease in charge transfer resistance and 12% decrease in the full cell area specific resistance. A chelated bismuth complex was also utilized as a bismuth source for electrodeposition, providing an example of how polyaminocarboxylate ligands can be further implemented into efforts towards improving the energy efficiency of aqueous redox flow batteries.

25 ENERGY STORAGE↗