Sareen, Ashish K. | Search NASA

NASA NTRS2007

Multi-Terrain Impact Testing and Simulation of a Composite Energy Absorbing Fuselage Section

Comparisons of the impact performance of a 5-ft diameter crashworthy composite fuselage section were investigated for hard surface, soft soil, and water impacts. The fuselage concept, which was originally designed for impacts onto a hard surface only, consisted of a stiff upper cabin, load bearing floor, and an energy absorbing subfloor. Vertical drop tests were performed at 25-ft/s onto concrete, soft-soil, and water at NASA Langley Research Center. Comparisons of the peak acceleration values, pulse durations, and onset rates were evaluated for each test at specific locations on the fuselage. In addition to comparisons of the experimental results, dynamic finite element models were developed to simulate each impact condition. Once validated, these models can be used to evaluate the dynamic behavior of subfloor components for improved crash protection for hard surface, soft soil, and water impacts.

Fasanella, Edwin L.↗

NASA NTRS2004

Multi-Terrain Impact Testing and Simulation of a Composite Energy Absorbing Fuselage Section

Comparisons of the impact performance of a 5-ft diameter crashworthy composite fuselage section were investigated for hard surface, soft soil, and water impacts. The fuselage concept, which was originally designed for impacts onto a hard surface only, consisted of a stiff upper cabin, load bearing floor, and an energy absorbing subfloor. Vertical drop tests were performed at 25-ft/s onto concrete, soft-soil, and water at NASA Langley Research Center. Comparisons of the peak acceleration values, pulse durations, and onset rates were evaluated for each test at specific locations on the fuselage. In addition to comparisons of the experimental results, dynamic finite element models were developed to simulate each impact condition. Once validated, these models can be used to evaluate the dynamic behavior of subfloor components for improved crash protection for hard surface, soft soil, and water impacts.

Fasanella, Edwin L.↗

NASA NTRS2002

Comparison of Hard Surface and Soft Soil Impact Performance of a Crashworthy Composite Fuselage Concept

A comparison of the soft soil and hard surface impact performance of a crashworthy composite fuselage concept has been performed. Specifically, comparisons of the peak acceleration values, pulse duration, and onset rate at specific locations on the fuselage were evaluated. In a prior research program, the composite fuselage section was impacted at 25 feet per second onto concrete at the Impact Dynamics Research Facility (IDRF) at NASA Langley Research Center. A soft soil test was conducted at the same impact velocity as a part of the NRTC/RITA Crashworthy and Energy Absorbing Structures project. In addition to comparisons of soft soil and hard surface test results, an MSC. Dytran dynamic finite element model was developed to evaluate the test analysis correlation. In addition, modeling parameters and techniques affecting test analysis correlation are discussed. Once correlated, the analytical methodology will be used in follow-on work to evaluate the specific energy absorption of various subfloor concepts for improved crash protection during hard surface and soft soil impacts.

Sareen, Ashish K.↗

NASA NTRS1991

Rotorcraft airframe structural optimization for combined vibration and fatigue constraints

This paper addresses the application of a formal optimization technique in rotorcraft airframe structural design studies to reduce the structural weight, to lower airframe vibrations, and to enhance fatigue life of the structure. Vibration and fatigue considerations in airframe design are described. An optimization methodology based on the use of a nonlinear programming technique to size airframe structural members subjected to constraints on weight, vibration response and fatigue stresses under dynamic loads, are described. The paper focuses on the development of necessary computational tools for airframe structural optimization and describes the sensitivity analysis procedure for these types of design constraints. Further, the paper describes the optimization procedure as implemented in a computer code called DYNOPT which is a unique operational combination of several newly developed Fortran codes as well as modification of existing codes consisting of the direct matrix abstraction modules of the MSC/NASTRAN Program and CONMIN optimizer. The application of the optimization procedure is demonstrated using an elastic-line model of the Bell AH-1G helicopter airframe structure and computational results are discussed.

Sareen, Ashish K.↗

NASA NTRS1991

Application of a two-point exponential approximation method in optimizing rotorcraft airframe structures

The Fadel (1990) two-point exponential approximation technique for rotorcraft airframe structural optimization is presently examined by comparing its results with the well established linear and hybrid first-order methods. Attention is given to both the elastic-line and FEM models of an AH-1G airframe. The Direct Matrix Abstraction Programming Language is used to compute sensitivity derivatives and motivate the CONMIN optimizer to produce the design change.

Sareen, Ashish K.↗