Engineering topics

Saremi, Sahar

Publications and source records attributed to Saremi, Sahar.

6 records

DOE OSTI2022

Light-Driven Ultrafast Polarization Manipulation in a Relaxor Ferroelectric

Relaxor ferroelectrics have been intensely studied for decades based on their unique electromechanical responses which arise from local structural heterogeneity involving polar nanoregions or domains. Here, we report first studies of the ultrafast dynamics and reconfigurability of the polarization in freestanding films of the prototypical relaxor 0.68PbMg 1/3 Nb 2/3 O 3 -0.32PbTiO 3 (PMN-0.32PT) by probing its atomic-scale response via femtosecond-resolution, electron-scattering approaches. By combining these structural measurements with dynamic phase-field simulations, we show that femtosecond light pulses drive a change in both the magnitude and direction of the polarization vector within polar nanodomains on few-picosecond time scales. This study defines new opportunities for dynamic reconfigurable control of the polarization in nanoscale relaxor ferroelectrics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2020

Piezoresponse amplitude and phase quantified for electromechanical characterization

Piezoresponse force microscopy (PFM) is a powerful characterization technique to readily image and manipulate the ferroelectric domains. PFM gives an insight into the strength of local piezoelectric coupling and polarization direction through PFM amplitude and phase, respectively. Converting measured arbitrary units into units of effective piezoelectric constant remains a challenge, and insufficient methods are often used. While most quantification efforts have been spent on quantifying the PFM amplitude signal, little attention has been given to the PFM phase, which is often arbitrarily adjusted to fit expectations. This is problematic when investigating materials with unknown or negative sign of the probed effective electrostrictive coefficient or strong frequency dispersion of electromechanical responses, because assumptions about the PFM phase cannot be reliably made. The PFM phase can, however, provide important information on the polarization orientation and the sign of the effective electrostrictive coefficient probed by PFM. Most notably, the orientation of the PFM hysteresis loop is determined by the PFM phase. Moreover, when presenting PFM data as a combined signal, the resulting response can be artificially lowered or asymmetric if the phase data have not been correctly processed. Here, we explain the PFM amplitude quantification process and demonstrate a path to identify the phase offset required to extract correct meaning from the PFM phase data. We explore different sources of phase offsets including the experimental setup, instrumental contributions, and data analysis. We discuss the physical working principles of PFM and develop a strategy to extract physical meaning from the PFM amplitude and phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Ultrahigh capacitive energy density in ion-bombarded relaxor ferroelectric films

Dielectric capacitors can store and release electric energy at ultrafast rates and are extensively studied for applications in electronics and electric power systems. Among various candidates, thin films based on relaxor ferroelectrics, a special kind of ferroelectric with nanometer-sized domains, have attracted special attention because of their high energy densities and efficiencies. We show that high-energy ion bombardment improves the energy storage performance of relaxor ferroelectric thin films. Intrinsic point defects created by ion bombardment reduce leakage, delay low-field polarization saturation, enhance high-field polarizability, and improve breakdown strength. We demonstrate energy storage densities as high as ~133 joules per cubic centimeter with efficiencies exceeding 75%. Deterministic control of defects by means of postsynthesis processing methods such as ion bombardment can be used to overcome the trade-off between high polarizability and breakdown strength.

Kim, Jieun↗

DOE OSTI2020

Defect-Enhanced Polarization Switching in the Improper Ferroelectric LuFeO 3

Results of switching behavior of the improper ferroelectric LuFeO 3 are presented. Here, using a model set of films prepared under controlled chemical and growth-rate conditions, it is shown that defects can reduce the quasi-static switching voltage by up to 40% in qualitative agreement with first-principles calculations. Switching studies show that the coercive field has a stronger frequency dispersion for the improper ferroelectrics compared to a proper ferroelectric such as PbTiO 3 . It is concluded that the primary structural order parameter controls the switching dynamics of such improper ferroelectrics.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Finite-size effects in lead scandium tantalate relaxor thin films

Large electromechanical effects in relaxor ferroelectrics are generally attributed to the collective response of an ensemble of correlated, nanometer-sized polar structures induced by chemical and charge disorder. Here, we study finite-size effects on such polar order (i.e., how it evolves when sample dimensions approach the polarization correlation length) in 7–70-nm-thick films of the relaxor ferroelectric PbSc 0.5 Ta 0.5 O 3 . Temperature-dependent polarization studies reveal a linear suppression of the polarization and nonlinearity associated with relaxor order as the film thickness decreases to ≈ 30 nm. Below this thickness, however, the suppression rapidly accelerates, and polarization is completely absent by film thicknesses of ≈ 7 nm, despite the continued observation of a broad peak in dielectric permittivity and frequency dispersion. Diffuse-scattering measurements reveal the diffuse-scattering symmetry, and analysis suggests the films have a polarization correlation length of ≈ 23 nm. Finally, taken together, it is apparent that reduction of sample size and the resulting distribution of polar structures drive suppression and eventual quenching of the electrical response of relaxors, which may be attributed to increasing dipole-dipole and dipole-interface interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Large Polarization and Susceptibilities in Artificial Morphotropic Phase Boundary PbZr 1– x Ti x O 3 Superlattices

The ability to produce atomically precise, artificial oxide heterostructures allows for the possibility of producing exotic phases and enhanced susceptibilities not found in parent materials. Typical ferroelectric materials either exhibit large saturation polarization away from a phase boundary or large dielectric susceptibility near a phase boundary. Both large ferroelectric polarization and dielectric permittivity are attained wherein fully epitaxial (PbZr 0.8 Ti 0.2 O 3 ) n /(PbZr 0.4 Ti 0.6 O 3 ) 2 n ( n = 2, 4, 6, 8, 16 unit cells) superlattices are produced such that the overall film chemistry is at the morphotropic phase boundary, but constitutive layers are not. Here, long- ( n ≥ 6) and short-period ( n = 2) superlattices reveal large ferroelectric saturation polarization ( P s = 64 µC cm –2 ) and small dielectric permittivity (ε r ≈ 400 at 10 kHz). Intermediate-period ( n = 4) superlattices, however, exhibit both large ferroelectric saturation polarization ( P s = 64 µC cm –2 ) and dielectric permittivity (ε r = 776 at 10 kHz). First-order reversal curve analysis reveals the presence of switching distributions for each parent layer and a third, interfacial layer wherein superlattice periodicity modulates the volume fraction of each switching distribution and thus the overall material response. This reveals that deterministic creation of artificial superlattices is an effective pathway for designing materials with enhanced responses to applied bias.

36 MATERIALS SCIENCE↗