Engineering topics

Sargent, Edward H.

Publications and source records attributed to Sargent, Edward H..

7 records

DOE OSTI2024

Solution-processed tungsten diselenide as an inorganic hole transport material for moisture-stable perovskite solar cells in the n-i-p architecture

Some of the obstacles to the commercialization of perovskite solar cells (PSCs) are their long-term moisture stability and material cost of the constituent layers, such as the commonly used spiro-OMeTAD hole transport layer (HTL). Replacing the spiro-OMeTAD with low-cost inorganic hole transport materials (HTMs) are important to further elevate the attractiveness of PSCs for commercialization. Perovskite-compatible, solution-exfoliated two-dimensional (2D) transition metal dichalcogenides (TMDCs) are being considered as viable candidates for inorganic HTMs. We consider one such TMDC, WSe 2 which was chemically exfoliated using dichlorobenzene (DCB), a perovskite-compatible solvent, as it was integrated with triple cation perovskite absorbers within the solar cell stack. Here, the WSe 2 HTL required heat treatment processes to be maintained below 100°C in order to preserve the integrity of the underlying perovskite; despite this lower temperature post treatment process, the structural morphology of the film revealed its dense and pinhole-free nature. Temperature-dependent transport studies conducted on the WSe 2 film provided evidence of its semiconducting character and its ability to extract holes well from the underlying triple-cation Cs 0.05 FA 0.79 MA 0.16 PbI 2.45 Br 0.55 absorber. The inorganic HTL offered better environmental stability in moisture-rich environments of up to 60% relative humidity, in comparison to spiro-OMeTAD HTL-based devices which degraded faster as a result of pinholes

14 SOLAR ENERGY↗

DOE OSTI2024

Amidination of ligands for chemical and field-effect passivation stabilizes perovskite solar cells

Surface passivation has driven the rapid increase in the power conversion efficiency (PCE) of perovskite solar cells (PSCs). However, state-of-the-art surface passivation techniques rely on ammonium ligands that suffer deprotonation under light and thermal stress. We developed a library of amidinium ligands, of interest for their resonance effect–enhanced N–H bonds that may resist deprotonation, to increase the thermal stability of passivation layers on perovskite surfaces. This strategy resulted in a >10-fold reduction in the ligand deprotonation equilibrium constant and a twofold increase in the maintenance of photoluminescence quantum yield after aging at 85°C under illumination in air. Here, implementing this approach, we achieved a certified quasi–steady-state PCE of 26.3% for inverted PSCs; and we report retention of ≥90% PCE after 1100 hours of continuous 1-sun maximum power point operation at 85°C.

Yang, Yi↗

DOE OSTI2024

Diamine chelates for increased stability in mixed Sn–Pb and all-perovskite tandem solar cells

Perovskite tandem solar cells show promising performance but non-radiative recombination and its progressive worsening with time, especially in the mixed Sn–Pb low-bandgap layer, limit performance and stability. Here, in this study, we find that mixed Sn–Pb perovskite thin films exhibit a compositional gradient, with an excess of Sn on the surface – and we show this gradient exacerbates oxidation and increases the recombination rate. We find that diamines preferentially chelate Sn atoms, removing them from the film surface and achieving a more balanced Sn:Pb stoichiometry, making the surface of the film resistive to the oxidation of Sn. The process forms an electrically resistive low-dimensional barrier layer, passivating defects and reducing interface recombination. Further improving the homogeneity of the barrier layer using 1,2-diaminopropane results in more uniform distribution and passivation. Tandems achieve a power conversion efficiency of 28.8%. As a result, encapsulated tandems retain 90% of initial efficiency following 1000 hours of operating at the maximum power point under simulated one-sun illumination in air without cooling.

14 SOLAR ENERGY↗

DOE OSTI2024

Two Spacers, One Perovskite: Integrating Ruddlesden–Popper and Dion–Jacobson Halide Perovskites

Hybrid organic–inorganic perovskites are a rapidly developing class of materials due to their desirable properties for optoelectronic applications such as their ease of synthesis, solution-processable film formation, tunable band gap, strong photoluminescence, good charge carrier mobilities, and high defect tolerance. Here, we present a novel 2D perovskite motif that seamlessly integrates the structural elements from both Ruddlesden–Popper and Dion–Jacobson halide perovskites. We demonstrate the incorporation of two different organic spacer cations in an ordered manner in 5 novel 2D perovskite iodide materials. Both a cyclic diammonium cation 3-(aminomethyl)piperidinium (3AMP) and a linear alkyl monoammonium cation (Cn = C n H 2n+4 N, n = 4–8) are present in distinct alternating layers, making the new series (Cn) 2 (3AMP)[PbI 4 ] 2 . The crystallization of these materials was optimized through careful temperature control to obtain precise crystal structures via single-crystal X-ray diffraction (XRD) which confirmed the presence of the two cations in distinct layers. The influence of the two spacers on optical properties including the band gaps and photoluminescence spectra are found to more closely resemble (3AMP)PbI 4 than (Cn) 2 PbI 4 , which can be attributed to the amount of distortion imposed by the 3AMP spacer on the lead iodide layers. The findings are supported by density functional theory calculations. The strong photoelectric response of solution-processed thin films shows the potential of these materials in photodetectors or photovoltaics. This unprecedented amalgamation of RP–DJ in (Cn) 2 (3AMP)[PbI 4 ] 2 in a structurally ordered fashion suggests a potential vastly underexplored phase space of 2D perovskites in which there are chemically different spacers in distinct layers of the structure, providing an additional parameter to tune perovskite properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Suppressed deprotonation enables a durable buried interface in tin-lead perovskite for all-perovskite tandem solar cells

Low-band-gap tin (Sn)-lead (Pb) perovskites are a critical component in all-perovskite tandem solar cells (APTSCs). Current state-of-the-art Sn-Pb perovskite devices exclusively use poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) as the hole-transport layer (HTL) but suffer from undesired buried-interface degradation. Here, we show that the deprotonation of the –SO 3 H group in PSS is the root cause of the interface degradation due to its low acid dissociation constant (pK a ), leading to acidic erosion and iodine volatilization in Sn-Pb perovskites. We identify that HTL featuring the carboxyl (–COOH) group with a higher pK a , such as poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT), can suppress deprotonation and strengthen the interface, mitigating the buried-interface degradation. Motivated by established P3CT modification, we introduce Pb doping to P3CT to increase its work function and reduce interfacial energy loss. Furthermore, we fabricate APTSCs with a champion efficiency of 27.8% and an operational lifetime of over 1,000 h, with 97% retaining efficiency under maximum power point tracking.

08 HYDROGEN↗

DOE OSTI2024

Progress and roadmap for electro-privileged transformations of bio-derived molecules

Biomass incorporates carbon captured from the atmosphere and can serve as a renewable feedstock for producing valuable chemicals and fuels. Here we look at how electrochemical approaches can impact biomass valorization, focusing on identifying chemical transformations that leverage renewable electricity and feedstocks to produce valorized products via electro-privileged transformations. First, we recommend that the field should explore widening the spectrum of platform chemicals derived from bio-feedstocks, thus offering pathways to molecules that have historically been derived from petroleum. Second, we identify opportunities in electrocatalytic production of energy-dense fuels from biomass that utilize water as the hydrogen source and renewable electricity as the driving force. Finally, we look at the potential in electrochemical depolymerization to preserve key functional groups in raw feedstocks that would otherwise be lost during harsh pre-treatments in traditional depolymerization routes. Finally, on the basis of these priorities, we suggest a roadmap for the integration of biomass and electrochemistry and offer milestones required to tap further into the potential of electrochemical biomass valorization.

electrocatalysis↗

DOE OSTI2024

Ligand-modified nanoparticle surfaces influence CO electroreduction selectivity

Improving the kinetics and selectivity of CO 2 /CO electroreduction to valuable multi-carbon products is a challenge for science and is a requirement for practical relevance. Here we develop a thiol-modified surface ligand strategy that promotes electrochemical CO-to-acetate. We explore a picture wherein nucleophilic interaction between the lone pairs of sulfur and the empty orbitals of reaction intermediates contributes to making the acetate pathway more energetically accessible. Density functional theory calculations and Raman spectroscopy suggest a mechanism where the nucleophilic interaction increases the sp 2 hybridization of CO (ad) , facilitating the rate-determining step, CO* to (CHO)*. We find that the ligands stabilize the (HOOC–CH 2 )* intermediate, a key intermediate in the acetate pathway. In-situ Raman spectroscopy shows shifts in C–O, Cu–C, and C–S vibrational frequencies that agree with a picture of surface ligand-intermediate interactions. A Faradaic efficiency of 70% is obtained on optimized thiol-capped Cu catalysts, with onset potentials 100 mV lower than in the case of reference Cu catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗