Cause, Consequence, and Control of Ag Vacancies in BaAg 2– x As 2
Explore the source record for details and available documents.
Kyveryga, Victoria↗
Engineering topics
Sarkar, Arka
Publications and source records attributed to Sarkar, Arka.
When van der Waals Met Kagome: A 2D Antimonide with a Vanadium-Kagome Network
2D materials showcase unconventional properties emerging from quantum confinement effects. In this work, a “soft chemical” route allows for the deintercalation of K + from the layered antimonide KV 6 Sb 6 , resulting in the discovery of a new metastable 2D-Kagome antimonide K 0.1(1) V 6 Sb 6 with a van der Waals gap of 3.2 Å. The structure of K 0.1(1) V 6 Sb 6 was determined via the synergistic techniques, including X-ray pair distribution function analysis, advanced transmission electron microscopy, and density functional theory calculations. The K 0.1(1) V 6 Sb 6 compound crystallizes in the monoclinic space group C2/m (a = 9.57(2) Å, b = 5.502(8) Å, c = 10.23(2) Å, β = 97.6(2)°, Z = 2). The [V 6 Sb 6 ] layers in K 0.1(1) V 6 Sb 6 are retained upon deintercalation and closely resemble the layers in the parent compound, yet deintercalation results in a relative shift of the adjacent [V 6 Sb 6 ] layers. The magnetic properties of the K 0.1(1) V 6 Sb 6 phase in the 2–300 K range are comparable to those of KV 6 Sb 6 and another Kagome antimonide KV 3 Sb 5 , consistent with nearly temperature-independent paramagnetism. Electronic band structure calculation suggests a nontrivial band topology with flat bands and opening of band crossing afforded by deintercalation. Transport property measurements reveal a metallic nature for K 0.1(1) V 6 Sb 6 and a low thermal conductivity of 0.6 W K –1 m –1 at 300 K. Additionally, ion exchange in KV 6 Sb 6 via a solvothermal route leads to a successful partial exchange of K + with A + (A = Na, Rb, and Cs). Here, this study highlights the tunability of the layered structure of the KV 6 Sb 6 compound, providing a rich playground for the realization of new 2D materials.
2D↗
A Ba 6 Cu 31 Te 22 ( A = K, Rb, Cs) Featuring Polyanionic Copper–Telluride Frameworks with Ultralow Thermal Conductivity
In this study, hree polyanionic tellurides, ABa 6 Cu 31 Te 22 (A = K, Rb, Cs), were synthesized in salt flux. The isostructural tellurides crystallize in a new structure type, in the cubic Pa$\overline{3}$ space group with a Wyckoff sequence of d 10 c 2 b 1 and large unit cell volumes of over 5500 Å 3 . The structures feature a framework of [CuTe 4 ] tetrahedra and [CuTe 3 ] trigonal pyramids with disorder in the Cu sites. The polyanionic frameworks have large square antiprism and cuboctahedral voids where Ba and alkali metal cations are situated, forming [BaTe 8 ] and [ATe 12 ], respectively. The overall compositions are close to being charge balanced. The large [ATe 12 ] cuboctahedra allowed for significant anisotropic displacement of the A cations, as observed from both single crystal X-ray diffraction and heat capacity studies. Alkali cations rattling together with Cu atom displacement and disorder leads to the dispersion of phonons, thus softening the lattice and subsequently reducing the thermal conductivity. Evaluations of the electronic band structure revealed the occurrence of a narrow bandgap together with the presence of a flat band near the valence band maximum, giving rise to the high thermopower. The Cs and Rb analogues show a slope change in the temperature dependence of electrical resistivity around room temperature, which is typical for semimetals or degenerate semiconductors. For the as-synthesized and unoptimized materials, high values of the thermoelectric figure-of-merit of ~0.2 were observed at 623 K.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Discovery of Ternary Antimonides A–Al–Sb (A = Rb or Cs) with Desired Structural Motifs Guided by Machine Learning
Specific structural motifs in inorganic solids are often related to their targeted physical properties. For many classes of solids, such as Zintl phases and polar intermetallics, the crystal structures are diverse and not easy to predict. Various antimonides that are potential thermoelectric materials were proposed to be synthesizable on the basis of their estimated formation energies. Their structures were broadly classified as clathrate, channel, layered, or network through a machine learning model trained on existing ternary phases and features based on elemental properties using the sure independence screening and sparsifying operator algorithm. Through experimental validation, three new ternary antimonides were synthesized and confirmed to form layered structures: tetragonal RbAlSb 2 and CsAlSb 2 , which are isopointal but not isotypic to LiBSi 2 ; and monoclinic Rb 2 Al 2 Sb 3 , which adopts the Na 2 Al 2 Sb 3 -type structure. Finally, reinvestigation of the related compound Cs 2 In 2 Sb 3 revealed a low thermal conductivity and p-type semiconducting behavior.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Unveiling a Family of Dimerized Quantum Magnets, Conventional Antiferromagnets, and Nonmagnets in Ternary Metal Borides
Dimerized quantum magnets are exotic crystalline materials where Bose–Einstein condensation of magnetic excitations can happen. However, known dimerized quantum magnets are limited to only a few oxides and halides. Here, we unveil 9 dimerized quantum magnets and 11 conventional antiferromagnets in ternary metal borides MTB 4 (M = Sc, Y, La, Ce, Lu, Mg, Ca, and Al; T = V, Cr, Mn, Fe, Co, and Ni), where T atoms are arranged in structural dimers. Quantum magnetism in these compounds is dominated by strong antiferromagnetic (AFM) interactions between Cr (Cr and Mn for M = Mg and Ca) atoms within the dimers, with much weaker interactions between the dimers. These systems are proposed to be close to a quantum critical point between a disordered singlet spin-dimer phase, with a spin gap, and the ordered conventional Néel AFM phase. They greatly enrich the materials inventory that allows investigations of the spin-gap phase. Conventional antiferromagnetism in these compounds is dominated by ferromagnetic Mn (Fe for M = Mg and Ca) interactions within the dimers. The predicted stable and nonmagnetic (NM) YFeB 4 phase is synthesized and characterized, providing a scarce candidate to study Fe dimers and Fe ladders in borides. The identified quantum, conventional, and NM systems provide a platform with abundant possibilities to tune the magnetic exchange coupling by doping and study the unconventional quantum phase transition and conventional magnetic transitions. Finally, this work opens new avenues for studying novel magnetism in borides arising from spin dimers and establishes a theoretical workflow for future searches for dimerized quantum magnets in other families of materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
BaCu T P 2 ( T = Al, Ga, In): a semiconducting black sheep in the ThCr 2 Si 2 intermetallic family
Semiconducting pnictides with a ThCr 2 Si 2 type structure were realized via mixing Cu and group 13 elements (Al, Ga, and In) in the metal site.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Organizing Chaos: Boosting Thermoelectric Properties by Ordering the Clathrate Framework of Ba 8 Cu 16 As 30
The type I clathrate, Ba 8 Cu 16 As 30 , is reinvestigated and found to have a low-temperature polymorph mP 108-Ba 8 Cu 16 As 30 with ordered Cu and As sites. In situ temperature-dependent powder X-ray diffraction experiments guided synthetic efforts toward the synthesis of the ordered monoclinic ( mP 108) and disordered cubic ( cP 54) polymorphs with high phase purity. While a transition from mP 108-Ba 8 Cu 16 As 30 to cP 54-Ba 8 Cu 16 As 30 is not directly observed, cP 54-Ba 8 Cu 16 As 30 is stabilized through quenching from high temperatures and is confirmed through high-resolution synchrotron powder X-ray diffraction. Further, combined theoretical predictions and experimental observations of the thermoelectric properties of both polymorphs reveal that the ordering of Cu and As atoms in the clathrate framework simultaneously enhances the Seebeck coefficient and electronic conductivity by increasing the hole effective mass and reducing the electronic scattering events. Consequently, the zT of mP 108-Ba 8 Cu 16 As 30 reaches a maximum of 0.2 at 575 K, an order of magnitude higher than that of cP 54-Ba 8 Cu 16 As 30 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A Recipe for a Great Meal: A Benchtop Route from Elemental Se to Superior Thermoelectric β-Ag 2 Se
The low-temperature modification of β-Ag 2 Se has proven to be useful as a near-room-temperature thermoelectric material. Over the past years, research has been devoted to interstitial, vacancy, and substitutional doping into the parent β-Ag 2 Se structure, aiming at tuning the material’s charge and heat transport properties to enhance thermoelectric performance. The transformation of β-Ag 2 Se into α-Ag 2 Se at ~134 °C and the low solubility of dopants are the main obstacles for the doping approach. Herein, we report a facile, safe, scalable, and cost-effective benchtop approach to successfully produce metal-doped β-Ag 2 Se. The doped materials display a remarkable enhancement of thermoelectric performance with a record-high peak zT of 1.30 at 120 °C and an average zT of ~1.15 in the 25–120 °C range for 0.2 at. % Zn-doped Ag 2 Se. The enhancement in zT is attributed to point defects created by Zn doping into Ag vacancies/interstitials, which enhances the scattering of phonons and tunes the charge carrier properties, leading to the significant suppression of thermal conductivity. In conclusion, the simplicity of the synthetic method developed herein and the high performance of the final products provide an avenue to produce high-quality Ag 2 Se-based thermoelectric materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Enhancing Properties with Distortion: A Comparative Study of Two Iron Phosphide Fe 2 P Polymorphs
Iron phosphide (Fe 2 P) crystallizes in its own hexagonal crystal structure type (h-Fe 2 P). As found in meteorites, orthorhombic polymorph (o-Fe 2 P) was originally reported as a high-temperature and high-pressure phase. Recently, o-Fe 2 P was described as being stable at ambient pressure, yet no synthetic methods were developed for single-crystal growth or single-phase bulk powder synthesis. Here, we report a successful method for growing o-Fe 2 P single crystals and synthesizing phase-pure polycrystalline samples using tin-flux. In situ powder X-ray diffraction studies showed that the phase transition from o-Fe 2 P to h-Fe 2 P occurs at about 873 K, and below that temperature, the formation of the o-Fe 2 P phase is favored thermodynamically rather than kinetically. Systematic comparison of transport, magnetic, and electrocatalytic properties of both h-Fe 2 P and o-Fe 2 P phases showed a substantial impact of the crystal structure on properties. The orthorhombic structural distortion resulted in considerable changes in magnetic properties, with the o-Fe 2 P phase exhibiting a 60% lower Fe magnetic moment and a substantially higher ferromagnetic Curie temperature than h-Fe 2 P. Further, electrochemical measurements toward the hydrogen evolution reaction in acidic media showed that the o-Fe 2 P phase requires an 80 mV lower overpotential than the h-Fe 2 P phase to generate a current density of -10 mA/cm 2 , and their electronic structures suggest that the higher density of states at the Fermi energy is the origin of superior catalytic activity in o-Fe 2 P.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Exploring the $A$-V-Sb landscape beyond $A$$\mathrm{V_3}$ $\mathrm{Sb_5}$: A case study on the $\mathrm{KV_6}$ $\mathrm{Sb_6}$ Kagome compound
Kagome compounds have garnered attention in the past few years for their intriguing magnetic properties arising from spin frustration dictated by the geometry of the Kagome sublattice. In this paper, we highlight the success of the unconventional hydride route for the fast and easy synthesis of the Kagome compound $\mathrm{KV_6}$ $\mathrm{Sb_6}$. Here, high-temperature in situ powder x-ray diffraction (PXRD) studies proved to be useful in hinting at the existence of $\mathrm{KV_6}$ $\mathrm{Sb_6}$, identifying its synthesis conditions, and understanding the reaction mechanism. The crystal structure for $\mathrm{KV_6}$ $\mathrm{Sb_6}$ was determined from high-resolution PXRD data. The compound has a layered structure [$R\overline{3}m, a = 5.5318$ (9) Å, $c = 34.23$ (3)Å 3 $Z = 3$] at room temperature] and features a Kagome bilayer of V atoms. $\mathrm{KV_6}$ $\mathrm{Sb_6}$ is isostructural to the previously reported $\mathrm{RbV_6}$ $\mathrm{Sb_6}$ and $\mathrm{CsV_6}$ $\mathrm{Sb_6}$ compounds. $\mathrm{KV_6}$ $\mathrm{Sb_6}$ is thermally stable in vacuum up to 1173 K, as evident from the high-temperature in situ PXRD and differential scanning calorimetric analysis. Investigation of magnetic properties for $\mathrm{KV_6}$ $\mathrm{Sb_6}$ between 2 and 300 K reveals temperature-independent paramagnetism and an absence of superconductivity, like the Rb and Cs analogs. Furthermore, we compare the magnetic properties of K V 3 Sb 5 , another ternary Kagome compound, synthesized via two different methods: the hydride route and the traditional route from elements. Low-temperature transport property measurements of $\mathrm{KV_6}$ $\mathrm{Sb_6}$ indicate metallic behavior and an intrinsically low thermal conductivity of $\mathrm{1.0 W K^-1}$ $\mathrm{m^-1}$ at 300 K. The layered structure of $\mathrm{KV_6}$ $\mathrm{Sb_6}$ makes it an attractive candidate for deintercalation and doping studies to tune both magnetic and transport properties, laying a foundation for further studies.
36 MATERIALS SCIENCE↗
BaCu 2 SiS 4 : A New Member of the A II B I 2 M IV Q 4 Chalcogenide Family with a Chiral Crystal Structure
Abstract Noncentrosymmetric ternary and quaternary chalcogenides are studied as promising nonlinear optical (NLO) materials in the mid‐infrared region. Here, we report the synthesis of a new material BaCu 2 SiS 4 in the A II B I 2 M IV Q 4 family ( A =divalent metal; B =monovalent metal; M =tetrel, Q =chalcogen), and discuss its crystal structure, thermal stability, optical behavior, and electronic structure. BaCu 2 SiS 4 crystallizes in the noncentrosymmetric chiral space group P 3 2 21 with lattice parameters a =6.1440(3) Å, c =15.3542(8) Å, V =501.95(6) Å 3 , Z =3. The structure features helical channels formed by corner‐sharing [CuS 4 ] and [SiS 4 ] tetrahedral units. Synthesis was carried out in a molten salt flux, as opposed to a traditional solid‐state route from elements, to minimize the formation of a competing ternary phase, Ba 2 SiS 4 . BaCu 2 SiS 4 is a semiconductor with an experimentally‐determined direct bandgap of ~2.2 eV. The material exhibits second harmonic generation (SHG) activity, confirming the noncentrosymmetric nature of the structure. Analysis of reported A II B I 2 M IV Q 4 crystal structures pointed out a correlation among potential structure types and the radii of the constituent elements. Total energy calculations were carried out to explore the relative stability of several reported crystal structures in this family of compounds.
Sarkar, Arka↗
New Trick for an Old Dog: From Prediction to Properties of “Hidden Clathrates” Ba 2 Zn 5 As 6 and Ba 2 Zn 5 Sb 6
The zinc–antimony phase space has been heavily investigated due to the structural complexity and abundance of high-performing thermoelectric materials. Consequentially, the desire to use zinc and antimony as framework elements to encage rattling cations and achieve phonon-glass-electron-crystal-type properties has remained an enticing goal with only two alkali metal clathrates to date, Cs 8 Zn 18 Sb 28 and K 58 Zn 122 Sb 207 . Guided by Zintl electron-counting predictions, here we explored the Ba–Zn–Pn (Pn = As, Sb) phase space proximal to the expected composition of the type-I clathrate. In situ powder X-ray diffraction studies revealed two “hidden” compounds which can only be synthesized in a narrow temperature range. The ex situ synthesis and crystal growth unveiled that instead of type-I clathrates, compositionally close but structurally different new clathrate-like compounds formed, Ba 2 Zn 5 As 6 and Ba 2 Zn 5 Sb 6 . These materials crystallize in a unique structure, in the orthorhombic space group Pmna with the Wyckoff sequence i 2 h 6 gfe. Single-phase synthesis enabled the exploration of their transport properties. Rattling of the Ba cations in oversized cages manifested low thermal conductivity, which, coupled with the high Seebeck coefficients observed, are prerequisites for a promising thermoelectric material. Potential for further optimization of the thermoelectric performance by aliovalent doping was computationally analyzed.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Revisiting two thiophosphate compounds constituting d 0 transition metal HfP 2 S 6 and d 10 transition metal α-Ag 4 P 2 S 6 as multifunctional materials for combining second harmonic generation response and photocurrent response
Two acentric thiophosphate compounds, HfP 2 S 6 and α-Ag 4 P 2 S 6 , are revisited and studied as infrared nonlinear optical materials. HfP 2 S 6 and α-Ag 4 P 2 S 6 were structurally characterized without any property measurements. Here, in this work, HfP 2 S 6 and α-Ag 4 P 2 S 6 were synthesized via high temperature salt flux reactions. Low-temperature polymorph acentric α-Ag 4 P 2 S 6 was purified and grown as mm-sized crystals with the aid of AgBr flux. The AgBr flux was revealed to play an important role in stabilizing the acentric α-Ag 4 P 2 S 6 . The acentric α-Ag 4 P 2 S 6 transforms to centrosymmetric β-Ag 4 P 2 S 6 at 850(5) K, which is revealed by differential scanning calorimetry (DSC) analysis and powder X-ray diffraction experiments. HfP 2 S 6 and α-Ag 4 P 2 S 6 are discovered by UV-vis spectrum measurements as indirect bandgap semiconductors with bandgaps of 2.2(1) eV and 2.5(1) eV, respectively, which is supported by DFT calculations and TB-LMTO-ASA calculations. The bonding pictures of α-Ag 4 P 2 S 6 were studied by crystal orbital Hamilton population calculations (COHP) coupled with electron localization function (ELF) analysis. DFT calculations predict that HfP 2 S 6 and α-Ag 4 P 2 S 6 would exhibit different optical performances regardless of being constructed from identical [P 2 S 6 ] motifs. HfP 2 S 6 exhibits a low second harmonic generation (SHG) response, ~0.21 × AGS (for the sample of particle size of 25 μm). α-Ag 4 P 2 S 6 possesses moderate SHG response, ~0.61 × AGS (for the sample of particle size of 225 μm) coupled with a high laser damage threshold (LDT) of ~3.2 × AGS. Characteristics of high ambient stability, moderate bandgap and SHG response, type-I phase-matching capability, and high LDT together with the easy growth of large crystals make α-Ag 4 P 2 S 6 attractive for future infrared nonlinear optical applications. Photocurrent measurements found that α-Ag 4 P 2 S 6 and β-Ag 4 P 2 S 6 have high photocurrent response, 165 nA cm -2 and 135 nA cm -2 , respectively. α-Ag 4 P 2 S 6 is a new multifunctional material of the ternary Ag–P–S system, which combines nonlinear optical (NLO) properties and photocurrent response.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Evolution of structure and transport properties of the Ba 8 Cu 16 P 30 clathrate-I framework with the introduction of Ga
Two type-I clathrates were synthesized by introducing Ga into the framework of the Ba 8 Cu 16 P 30 type-I clathrate. The introduction of minute amounts of Ga, 1.9% Ga/M total (where M total = Cu + Ga), resulted in the disturbance of the completely ordered Pbcn superstructure of Ba 8 Cu 16 P 30 . Ba 8 Cu 15.43(2) Ga 0.3 P 30.26(3) crystallizes in a partially ordered orthorhombic Pmna clathrate-I superstructure with five out of 15 framework sites being jointly occupied by metal+phosphorus. Increasing the Ga content resulted in all framework sites being occupied by metal + phosphorus in the archetype cubic Pm n clathrate-I crystal structure of Ba 8 Cu 14.5(3) Ga 1.3 P 30.2(4) with 8.2% Ga/M total . A combination of energy dispersive x-ray spectroscopy, inductively coupled plasma mass spectroscopy, and single crystal x-ray diffraction was used to determine the structures alongside the compositions. The positional disorder was verified by 31 P solid state NMR spectroscopy. Characterization of the transport properties indicated that the Ga-substituted samples exhibit higher Seebeck coefficients and electrical resistivities compared to its pristine counterpart, in line with the expected reduction of the hole concentration due to Ga/Cu substitution. Moderate improvements in the thermoelectric power factor and overall figure-of-merit were observed for samples with 6.9% and 3.8% Ga/M total as compared to those for the pristine Ba 8 Cu 16 P 30 clathrate. Finally, band structure calculations shed light on how Ga substitution affects the electronic structure and thermoelectric properties of studied clathrates.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗