Search NASA⌕ Search

Engineering topics

Sato, S.

Publications and source records attributed to Sato, S..

IRDFF-II: A New Neutron Metrology Library

High quality nuclear data is the most fundamental underpinning for all neutron metrology applications. This paper describes the release of version II of the International Reactor Dosimetry and Fusion File (IRDFF-II) that contains a consistent set of nuclear data for fission and fusion neutron metrology applications up to 60 MeV neutron energy. The library is intended to support: a) applications in research reactors; b) safety and regulatory applications in the nuclear power generation in commercial fission reactors; and c) material damage studies in support of the research and development of advanced fusion concepts. The paper describes the contents of the library, documents the thorough verification process used in its preparation, and provides an extensive set of validation data gathered from a wide range of neutron benchmark fields. The new IRDFF-II library includes 119 metrology reactions, four cover material reactions to support self-shielding corrections, five metrology metrics used by the dosimetry community, and cumulative fission products yields for seven fission products in three different neutron energy regions. In support of characterizing the measurement of the residual nuclei from the dosimetry reactions and the fission product decay modes, the present document lists the recommended decay data, particle emission energies and probabilities for 68 activation products. It also includes neutron spectral characterization data for 29 neutron benchmark fields for the validation of the library contents. Additional six reference fields were assessed (four from plutonium critical assemblies, two measured fields for thermal-neutron induced fission on 233U and 239Pu targets) but not used for validation due to systematic discrepancies in C/E reaction rate values or lack of reaction-rate experimental data. Another ten analytical functions are included that can be useful for calculating average cross sections, average energy, thermal spectrum average cross sections and resonance integrals. The IRDFF-II library and comprehensive documentation is available online at www-nds.iaea.org/IRDFF/. Evaluated cross sections can be compared with experimental data and other evaluations at www-nds.iaea.org/exfor/endf.htm. The new library is expected to become the international reference in neutron metrology for multiple applications.

IAEA IRDFF↗

N+3 Aircraft Concept Designs and Trade Studies

MIT, Aerodyne Research, Aurora Flight Sciences, and Pratt & Whitney have collaborated to address NASA s desire to pursue revolutionary conceptual designs for a subsonic commercial transport that could enter service in the 2035 timeframe. The MIT team brings together multidisciplinary expertise and cutting-edge technologies to determine, in a rigorous and objective manner, the potential for improvements in noise, emissions, and performance for subsonic fixed wing transport aircraft. The collaboration incorporates assessment of the trade space in aerodynamics, propulsion, operations, and structures to ensure that the full spectrum of improvements is identified. Although the analysis focuses on these key areas, the team has taken a system-level approach to find the integrated solutions that offer the best balance in performance enhancements. Based on the trade space analyses and system-level assessment, two aircraft have been identified and carried through conceptual design to show both the in-depth engineering that underpins the benefits envisioned and also the technology paths that need to be followed to enable, within the next 25 years, the development of aircraft three generations ahead in capabilities from those flying today.

Greitzer, E. M.↗

In Situ Irradiation and Measurement of Triple Junction Solar Cells at Low Intensity, Low Temperature (LILT) Conditions

The performance of triple junction InGaP/(In)GaAs/Ge space solar cells was studied following high energy electron irradiation at low temperature. Cell characterization was carried out in situ at the irradiation temperature while using low intensity illumination, and, as such, these conditions reflect those found for deep space, solar powered missions that are far from the sun. Cell characterization consisted of I-V measurements and quantum efficiency measurements. The low temperature irradiations caused substantial degradation that differs in some ways from that seen after room temperature irradiations. The short circuit current degrades more at low temperature while the open circuit voltage degrades more at room temperature. A room temperature anneal after the low temperature irradiation produced a substantial recovery in the degradation. Following irradiation at both temperatures and an extended room temperature anneal, quantum efficiency measurement suggests that the bulk of the remaining damage is in the (In)GaAs sub-cell

Quantum Efficiency↗

The Far-Infrared Photometer on the Infrared Telescope in Space

We describe the design and calibration of the Far-Infrared Photometer (FIRP), one of four focal plane instruments on the Infrared Telescope in Space (IRTS). The FIRP will provide absolute photometry in four bands centered at 150, 250, 400, and 700 microns with spectral resolution wavelength/wavelength spread is approximately 3 and spatial resolution delta theta = 0.5 degrees. High sensitivity is achieved by using bolometric detectors operated at 300 mK in an AC bridge circuit. The closed-cycle He-3 refrigerator can be recycled in orbit. A 2 K shutter provides a zero reference for each field of view. More than 10% of the sky will be surveyed during the 3 week mission lifetime with a sensitivity of less than 10(exp -13) W per sq cm per sr per 0.5 degree pixel.

Lange, A. E.↗

A Far Infrared Photometer (FIRP) for the infrared telescope in space (IRTS)

We describe the design and calibration of the Far-Infrared Photometer (FIRP), one of four focal plane instruments on the Infrared Telescope in Space (IRTS). The FIRP will provide absolute photometry in four bands centered at 150, 250, 400, and 700 micrometers with spectral resolution lambda/(Delta lambda) approx. = 3 and spatial resolution Delta theta = 0.5 degrees. High sensitivity is achieved by using bolometric detectors operated at 300 mK in an AC bridge circuit. The closed-cycle He-3 refrigerator can be recycled in orbit. A 2 K shutter provides a zero reference for each field of view. More than 10% of the sky will be surveyed during the approximately 3 week mission lifetime with a sensitivity of less than 10(exp -13) W/((sq cm)(sr)) per 0.5 degree pixel.

Freund, M. M.↗

A dc-coupled, high sensitivity bolometric detector system for the Infrared Telescope in Space

We report the performance of an ac bridge readout system that has been developed for use on the Infrared Telescope in Space which is scheduled for launch in 1994. The ac bridge readout provides excellent dc stability enabling observing strategies well-suited to space-borne observations. The ability to modulate the optical signal slowly allows the use of new, highly sensitive, long time-constant bolometers. At 300 mK, the bolometers have an electrical noise equivalent power of 3 x 10 exp -17 W/sq rt Hz. The total noise of the differential signal, including amplifier noise, is less than 8 x 10 exp -17 W/sq rt Hz at frequencies as low as 35 mHz.

Devlin, M.↗

Improved low frequency stability of bolometric detectors

An ac bridge readout system has been developed that greatly improves the low-frequency stability of bolometric detectors. The readout can be implemented with a simple circuit appropriate for use in space applications. A matched pair of detectors was used in the readout to achieve system noise within a factor of two of the fundamental noise limit of the detectors at frequencies as low as 10 mHz. The low-frequency stability of the readout system allows slower, more sensitive detectors to be used in many applications, and it facilitates observing strategies that are well suited to spaceborne observations.

Wilbanks, T.↗

A two micron polarization survey toward dark clouds

A near infrared (2.2 micron) polarization survey of about 190 sources was conducted toward nearby dark clouds. The sample includes both background field stars and embedded young stellar objects. The aim is to determine the magnetic field structure in the densest regions of the dark clouds and study the role of magnetic fields in various phases of star formation processes, and to study the grain alignment efficiency in the dark cloud cores. From the polarization of background field stars and intrinsically unpolarized embedded sources, the magnetic field structure was determined in these clouds. From the intrinsic polarization of young stellar objects, the spatial distribution was determined of circumstellar dust around young stars. Combining the perpendicularity between the disks and magnetic fields with perpendicularity between the cloud elongation and magnetic fields, it is concluded that the magnetic fields might have dominated nearly all aspects of cloud dynamics, from the initial collapse of the clouds right through to the formation of disks/tori around young stars in these low to intermediate mass star forming clouds of the Taurus, Ophiuchus, and Perseus.

Tamura, M.↗

A rocket-borne measurement of interstellar dust emission at high galactic latitude

The diffuse brightness of the sky was measured in six submillimeter passbands, using a rocket-borne, liquid helium-cooled, absolute radiometer. The average brightness was reported which was observed in each of the passbands, and the dominant source of emission was tentatively identified in the three shortest wavelength bands as interstellar dust (ISD). Spacial structure was observed in these bands, as would be expected for emission from the ISD. The average column density of H I was calculated in each field of view along the scan path. All three bands show a significant correlation with H I. The obtained values are in excellent agreement with those computed for a mixture of graphite and silicate grains. A significant residual emission, not correlated with the H I column density, is evident in all three channels.

Lange, Andrew E.↗

MU radar observation of a mesospheric gravity wave breaking caused by convective instability

In recent measurements of mesospheric winds with the MU radar at Shigaraki (34.9 N, 136.1 E), Japan, a couple of wind velocity data was obtained showing that a monochromatic inertia-gravity wave was propagating vertically in the mesosphere. The data show that the velocity amplitude of the wave did not increase exponentially above a height and further show that the wave form had broken down at a level. Evaluating the changes of the atmospheric stability in the wave field from the measured wind data and from the estimated wave parameters, the breakdown of the wave was shown to be connected with the occurrence of convective instability in the wave field.

Muraoka, Y.↗

The submillimeter spectrum of the cosmic background radiation

The diffuse brightness of the sky has been measured in six submillimeter passbands, using a rocket-borne, liquid helium-cooled, absolute radiometer. The flux measured at 1160 microns is in good agreement with the average of longer wavelength measurements of the temperature of the cosmic background radiation. The fluxes measured at 709 microns and 481 microns show a rapid decrease toward shorter wavelength, but correspond to significantly higher temperatures. No local source of this excess flux has been identified. The spectrum of the excess significantly constrains cosmological models. Data at 262, 137, and 102 microns are consistent with emission from interstellar dust.

Matsumoto, T.↗