Search NASA⌕ Search

Engineering topics

Scanlon, David O.

Publications and source records attributed to Scanlon, David O..

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

(NH 3 (CH 2 ) 7 NH 3 ) 2 Sn 3 I 10 , a Vacancy-Ordered Three-Dimensional Tin(II) Perovskite-Derived Semiconductor

Ordering vacancies in hybrid Sn(II) halide semiconductors provides a strategy for preventing uncontrolled oxidation and formation of mobile holes. In this study, we report the structure and optical and electronic properties of (NH 3 (CH 2 ) 7 NH 3 ) 2 Sn 3 I 10 , a vacancy-ordered perovskite derivative with three-dimensional inorganic connectivity. The crystal structure resembles that of a Dion–Jacobson layered perovskite derivative, but with [SnI 5 ] square pyramids bridging the layers. UV–vis diffuse reflectance spectroscopy reveals a sharp onset of light absorption at 1.86(1) eV with the photoluminescence emission maximum at 1.90(1) eV. However, the maximum excitation occurs from 3.42 to 3.81 eV (325 to 370 nm), revealing a significant Stokes shift of 1.3 eV. The electronic properties determined from dark and time-resolved microwave conductivity measurements reveal a minimum carrier mobility of 4.3 × 10 –2 cm 2 V –1 s –1 and a maximum carrier density of 5.96 × 10 16 cm –3 , a uniquely low value for a hybrid Sn(II) halide semiconductor. The transport behavior in combination with first-principles calculations of the electronic band structure and dielectric permittivity suggest polaron-mediated electronic transport, yet the photogenerated carriers have a fast and fluence-dependent nonradiative recombination rate, suggestive of localized “defect-like” states at the band edge. The observed photoluminescence is most consistent with single-ion-like behavior of an asymmetric Sn(II) environment. Together, these results suggest that defect ordering presents a strategy for the reduction of mobile charge carriers at equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Defect-Limited Mobility and Defect Thermochemistry in Mixed A-Cation Tin Perovskites: (CH3NH3)1-xCsxSnBr3

Hybrid organic-inorganic semiconductors crystallizing in the perovskite structure present a significant opportunity for realizing defect-tolerant semiconductors. In this work, we examine the solid solution, (CH3NH3)1-xCsxSnBr3, and identify the thermochemistry dictating the intrinsic carrier concentrations and how local structural distortions influences this electronic behavior. This family of compounds exhibits the expected systematic trend in decreasing optical gap with the cesium to methylammonium A-site mixing ratio, x, in the visible region. However, the carrier mobility, as determined from time-resolved microwave conductivity measurements, trends opposite to that expected from first-principles calculations combined with Boltzmann scattering theory calculations of the carrier mobility. We propose that this is a result of increasing carrier scattering with x in (CH3NH3)1-xCsxSnBr3 due to a significant increase in the carrier density with x. By examining the dependence of the carrier density as a function of x, we infer the compositional-dependence of the average enthalpy and nonconfigurational entropy per defect. While diffraction reveals a cubic aristotypic perovskite structure as a function of x at room temperature, the pair distribution functions obtained from synchrotron X-ray total scattering from these materials are better described by symmetry-adapted displacement modes of the Pm3m crystal structure, which we attribute to a large degree of anharmonic dynamics of the atom positions. This analysis shows that CH3NH3+-rich compositions retain mostly linear Sn-Br-Sn bonding environments through the displacements, while Cs+-rich compositions lead to more significantly bent Sn-Br-Sn environments. We propose that these bent bonding arrangements in Cs-rich compositions yield a higher propensity for defect formation. This also provides a rationale for carrier trapping that gives rise to anomalous microwave transients. Together, these results provide insight into the structure-dynamics-properties relationships in this highly anharmonic system with high amplitude atomic motions and low defect formation energies.

defect thermochemistry↗
DOE OSTI2023

Emergent and robust ferromagnetic-insulating state in highly strained ferroelastic LaCoO 3 thin films

Transition metal oxides are promising candidates for the next generation of spintronic devices due to their fascinating properties that can be effectively engineered by strain, defects, and microstructure. An excellent example can be found in ferroelastic LaCoO 3 with paramagnetism in bulk. In contrast, unexpected ferromagnetism is observed in tensile-strained LaCoO 3 films, however, its origin remains controversial. Here we simultaneously reveal the formation of ordered oxygen vacancies and previously unreported long-range suppression of CoO 6 octahedral rotations throughout LaCoO 3 films. Supported by density functional theory calculations, we find that the strong modification of Co 3d-O 2p hybridization associated with the increase of both Co-O-Co bond angle and Co-O bond length weakens the crystal-field splitting and facilitates an ordered high-spin state of Co ions, inducing an emergent ferromagnetic-insulating state. Our work provides unique insights into underlying mechanisms driving the ferromagnetic-insulating state in tensile-strained ferroelastic LaCoO 3 films while suggesting potential applications toward low-power spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

2023 roadmap for potassium-ion batteries

Abstract The heavy reliance of lithium-ion batteries (LIBs) has caused rising concerns on the sustainability of lithium and transition metal and the ethic issue around mining practice. Developing alternative energy storage technologies beyond lithium has become a prominent slice of global energy research portfolio. The alternative technologies play a vital role in shaping the future landscape of energy storage, from electrified mobility to the efficient utilization of renewable energies and further to large-scale stationary energy storage. Potassium-ion batteries (PIBs) are a promising alternative given its chemical and economic benefits, making a strong competitor to LIBs and sodium-ion batteries for different applications. However, many are unknown regarding potassium storage processes in materials and how it differs from lithium and sodium and understanding of solid–liquid interfacial chemistry is massively insufficient in PIBs. Therefore, there remain outstanding issues to advance the commercial prospects of the PIB technology. This Roadmap highlights the up-to-date scientific and technological advances and the insights into solving challenging issues to accelerate the development of PIBs. We hope this Roadmap aids the wider PIB research community and provides a cross-referencing to other beyond lithium energy storage technologies in the fast-pacing research landscape.

Xu, Yang (ORCID:0000000301776348)↗
DOE OSTI2022

P-type conductivity in Sn-doped Sb 2 Se 3

Abstract Antimony selenide (Sb 2 Se 3 ) is a promising absorber material for thin-film photovoltaics. However, certain areas of fundamental understanding of this material remain incomplete and this presents a barrier to further efficiency gains. In particular, recent studies have highlighted the role of majority carrier type and extrinsic doping in drastically changing the performance of high efficiency devices (Hobson et al 2020 Chem. Mater. 32 2621–30). Herein, Sn-doped Sb 2 Se 3 bulk crystals are shown to exhibit p-type conductivity using Hall effect and hot-probe measurements. The measured conductivities are higher than those achieved through native defects alone, but with a carrier density (up to 7.4 × 10 14 cm −3 ) several orders of magnitude smaller than the quantity of Sn included in the source material. Additionally, a combination of ultraviolet, x-ray and hard x-ray photoemission spectroscopies are employed to obtain a non-destructive depth profile of the valence band maximum, confirming p-type conductivity and indicating a majority carrier type inversion layer at the surface. Finally, these results are supported by density functional theory calculations of the defect formation energies in Sn-doped Sb 2 Se 3 , showing a possible limit on the carrier concentration achievable with Sn as a dopant. This study sheds light on the effectiveness of Sn as a p-type dopant in Sb 2 Se 3 and highlights avenues for further optimisation of doped Sb 2 Se 3 for solar energy devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Manipulating the metal-to-insulator transition and magnetic properties in manganite thin films via epitaxial strain

Strain engineering of epitaxial transition metal oxide heterostructures offers an intriguing opportunity to control electronic structures by modifying the interplay between spin, charge, orbital, and lattice degrees of freedom. Here, we demonstrate that the electronic structure, magnetic and transport properties of La 0.9 Ba 0.1 MnO 3 thin films can be effectively controlled by epitaxial strain. Spectroscopic studies and first-principles calculations reveal that the orbital occupancy in Mn eg orbitals can be switched from the d 3z 2 -r 2 orbital to the d x 2 -y 2 orbital by varying the strain from compressive to tensile. Further, the change of orbital occupancy associated with Mn 3d-O 2p hybridization leads to dramatic modulation of the magnetic and electronic properties of strained La 0.9 Ba 0.1 MnO 3 thin films. Under moderate tensile strain, an emergent ferromagnetic insulating state with an enhanced ferromagnetic Curie temperature of 215 K is achieved. These findings not only deepen our understanding of electronic structures, magnetic and transport properties in the La 0.9 Ba 0.1 MnO 3 system, but also demonstrate the use of epitaxial strain as an effective knob to tune the electronic structures and related physical properties for potential spintronic device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Crystal Structure of Colloidally Prepared Metastable Ag 2 Se Nanocrystals

Structural polymorphism is known for many bulk materials; however, on the nanoscale metastable polymorphs tend to form more readily than in the bulk, and with more structural variety. One such metastable polymorph observed for colloidal Ag 2 Se nanocrystals has traditionally been referred to as the “tetragonal” phase. While there are reports on the chemistry and properties of this metastable polymorph, its crystal structure, and therefore electronic structure, has yet to be determined. We report that an anti-PbCl 2 -like structure type (space group P2 1 /n) more accurately describes the powder X-ray diffraction and X-ray total scattering patterns of colloidal Ag 2 Se nanocrystals prepared by several different methods. Density functional theory (DFT) calculations indicate that this anti-PbCl 2 -like Ag 2 Se polymorph is a dynamically stable, narrow-band-gap semiconductor. Here, the anti-PbCl 2 -like structure of Ag 2 Se is a low-lying metastable polymorph at 5–25 meV/atom above the ground state, depending on the exchange-correlation functional used.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

On the Crystal Structure of Colloidally Prepared Metastable Ag2Se Nanocrystals

Structural polymorphism is known for many bulk materials; however, on the nanoscale metastable polymorphs tend to form more readily than in the bulk, and with more structural variety. One such metastable polymorph observed for colloidal Ag2Se nanocrystals has traditionally been referred to as the “tetragonal” phase of Ag2Se. While there are reports on the chemistry and properties of this metastable polymorph, its crystal structure, and therefore electronic structure, has yet to be determined. We report that an anti-PbCl2-like structure type (space group P21/n) accurately describes the powder X-ray diffraction and X-ray total scattering patterns of colloidal Ag2Se nanocrystals prepared by several different methods. Density functional theory (DFT) calculations indicate that the anti-PbCl2-like Ag2Se polymorph is a dynamically stable, narrow-band gap semiconductor. DFT results reveal a dense theoretical Ag2Se phase space with many low-energy polymorphs, which helps explain the large number of polymorphs reported in the literature. Analysis and calculation data are stored in the zip archive. The `ag2se-calcs.aiida.` contains the provenance of the calculations and can be imported into an AiiDA database instance. The antiPbCl2like_Ag2Se_laboratory.cif file is the Reitveld refined Ag2Se structure starting from the PbCl2 structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Accelerating the development of new solar absorbers by photoemission characterization coupled with density functional theory

Abstract The expectation to progress towards Terawatts production by solar technologies requires continuous development of new materials to improve efficiency and lower the cost of devices beyond what is currently available at industrial level. At the same time, the turnaround time to make the investment worthwhile is progressively shrinking. Whereas traditional absorbers have developed in a timeframe spanning decades, there is an expectation that emerging materials will be converted into industrially relevant reality in a much shorter timeframe. Thus, it becomes necessary to develop new approaches and techniques that could accelerate decision-making steps on whether further research on a material is worth pursuing or not. In this review, we will provide an overview of the photoemission characterization methods and theoretical approaches that have been developed in the past decades to accelerate the transfer of emerging solar absorbers into efficient devices.

14 SOLAR ENERGY↗
DOE OSTI2020

Interaction of hydrogen with actinide dioxide (011) surfaces

The corrosion and oxidation of actinide metals, leading to the formation of metal-oxide surface layers with the catalytic evolution of hydrogen, impacts the management of nuclear materials. In this work, the interaction of hydrogen with actinide dioxide (AnO 2 , An = U, Np, or Pu) (011) surfaces by Hubbard corrected density functional theory (PBEsol+U) has been studied, including spin–orbit interactions and non-collinear 3k anti-ferromagnetic behavior. The actinide dioxides crystalize in the fluorite-type structure, and although the (111) surface dominates the crystal morphology, the (011) surface energetics may lead to more significant interaction with hydrogen. The dissociative adsorption of hydrogen on the UO 2 (0.44 eV), NpO 2 (-0.47 eV), and PuO 2 (-1.71 eV) (011) surfaces has been calculated. It is found that hydrogen dissociates on the PuO 2 (011) surface; however, UO 2 (011) and NpO 2 (011) surfaces are relatively inert. Recombination of hydrogen ions is likely to occur on the UO 2 (011) and NpO 2 (011) surfaces, whereas hydroxide formation is shown to occur on the PuO 2 (011) surface, which distorts the surface structure.

36 MATERIALS SCIENCE↗