Search NASA⌕ Search

Engineering topics

Schaefer, Dale W

Publications and source records attributed to Schaefer, Dale W.

Morphology and water-barrier properties of silane films on aluminum and silicon

The goal of this study is to understand the effect of the substrate on the morphology and water-barrier properties of bis-silane films. Silane films are deposited on both Si and Al. Neutron reflectivity is used to assess the effect of hydrothermal conditioning on the films. Aluminum on silicon (no silane) was characterized first to facilitate understanding of the more complicated silane on Al-coated Si. A 200-{angstrom} Al layer with 55-{angstrom} oxide covers the surface of the silicon wafer. The reflectivity data show that water penetrates into the oxide layer. Silane films deposited on either Al or Si substrates have similar bulk and top-surface morphology. Studies of silanes on Si wafers, therefore, can be generalized to include Al. The substrate-silane interface, however, does depend on both the substrate and the silane. Because pH of the bis-sulfur silane solution is outside of the stability range for Al{sub 2}O{sub 3}, dissolution of the thin oxide film occurs during solution deposition. A water-depletion area is formed at the interface region due to this reaction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Morphology and water resistance of mixed silane films of bis[3-(triethoxysilyl) propyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine

Functional organosilanes are powerful interface-active agents that find applications as adhesion promoters as well as optical, dielectric and protective coatings. Bis-silanes are of particular interest because they are highly crosslinked leading to very robust films. In almost all applications, the water resistance of the films is a critical performance measure. Here we use neutron reflectivity to address the effect of bridging group on the hydrothermal response of bis-silane films prepared using bis[3-(triethoxysilyl) propyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine. Neat and mixed films are examined as-prepared, after exposure to water vapor and then in the re-dried state. The bridging group is the key factor that controls the morphology and water resistance of silane films. Although bis-sulfur silane is not as condensed as bis-amino silane, bis-sulfur swells less in water because of the hydrophobic nature of bridging group. The reflectivity of bis-sulfur silane film is reversible after room-temperature water conditioning but not at 80 C, indicating chemical alternation of the film at 80 C. The water resistance of mixed silane is roughly that of both components weighted by their volume fraction. But based on the enhanced shrinkage that occurs following water-vapor conditioning of the mixed film, condensation is accelerated in the mixed silane. Regarding the precursor solution, bis-amino silane may act as a catalyst in the hydrolysis of bis-sulfur silane leading to more silanols in the solution and further condensation in the film. Variation in the structure normal to the substrate is also examined by swelling the film with d-nitrobenzene, a non-reacting swelling agent.

36 MATERIALS SCIENCE↗

Effect of silica nanoparticles on morphology of segmented polyurethanes

Two series of segmented polyurethanes having soft segment concentration of 50 and 70 wt%, and different concentrations of nanometer-diameter silica were prepared and tested. Atomic force microscopy revealed a strong effect of nanoparticles on the large-scale spherulitic morphology of the hard domains. Addition of silica suppresses fibril formation in spherulites. Filler particles were evenly distributed in the hard and soft phase. Nano-silica affected the melting point of the hard phase only at loadings >30 wt% silica. A single melting peak was observed at higher filler loadings. There is no clear effect of the filler on the glass transition of soft segments. Wide-angle X-ray diffraction showed decreasing crystallinity of the hard domains with increasing filler concentration in samples with 70 wt% soft segment. Ultra small-angle X-ray scattering confirms the existence of nanometer phase-separated domains in the unfilled sample. These domains are disrupted in the presence of nano-silica. The picture that emerges is that nano-silica suppresses short-scale phase separation of the hard and soft segments. Undoubtedly, the formation of fibrils on larger scales is related to short-scale segment segregation, so when the latter is suppressed by the presence of silica, fibril growth is also impeded.

36 MATERIALS SCIENCE↗

How Nano Are Nanocomposites

Composite materials loaded with nanometer-sized reinforcing fillers are widely believed to have the potential to push polymer mechanical properties to extreme values. Realization of anticipated properties, however, has proven elusive. The analysis presented here traces this shortfall to the large-scale morphology of the filler as determined by small-angle X-ray scattering, light scattering, and electron imaging. We examine elastomeric, thermoplastic, and thermoset composites loaded with a variety of nanoscale reinforcing fillers such as precipitated silica, carbon nanotubes (single and multiwalled), and layered silicates. The conclusion is that large-scale disorder is ubiquitous in nanocomposites regardless of the level of dispersion, leading to substantial reduction of mechanical properties (modulus) compared to predictions based on idealized filler morphology.

36 MATERIALS SCIENCE↗

Characterization of Nanocomposite filler Morphology using Ultra Small-Angle X-ray Scattering

Loading polymer matrices with nanoscale fillers is widely believed to have the potential to push polymer properties to extreme values. Realization of anticipated properties, however, has proven elusive. Recent nanocomposite research suggests better characterization of the large-scale morphology will provide insight explaining these shortfalls. This work will present ultra-small angle X-ray scattering as a viable tool for elucidating the hierarchical filler morphology that exists within polymer nanocomposites. Scattering analysis tools developed by our group will be applied to scattering data from nanocomposites filled with carbon nanotubes, layered silicates, and colloidal silica. The relationship between imaging data and scattering data will be discussed in the context of filler dispersion. Finally, the impact of large-scale filler morphology on mechanical and electrical properties will be discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure-property relationships in flavour-barrier membranes with reduced high-temperature diffusivity

Encapsulation is used to decrease the premature release of volatile flavour ingredients while offering protection against environmental damage such as oxidation, light-induced reactions, etc. Hydroxypropyl cellulose (HPC) is investigated here as a 'smart,' temperature responsive membrane for flavour encapsulation and delivery. Gel films were synthesized and characterized by diffusion and small-angle neutron and X-ray scattering techniques. Increasing temperature typically increases the diffusion rate across a membrane; HPC, however, can be tailored to give substantially improved elevated temperature properties. Scattering results indicate processing conditions have a significant impact on membrane morphology (micro phase separation). Under certain synthetic conditions, micro phase separation is mitigated and the membranes show temperature-independent diffusivity between 25 C and 60 C.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hierarchical morphology of carbon single-walled nanotubes during sonication in an aliphatic diamine

Dispersion of single-walled carbon nanotubes (SWNTs) by sonication into diamine curing agents is studied as a means to improve the dispersion of SWNTs in cured epoxy. Cured and uncured specimens are analyzed by light microscopy, electron microscopy, light scattering (LS), ultra small-angle X-ray scattering (USAXS), electrical conductivity and Raman spectroscopy. A flexible diamine (D2000) forms a stable SWNT suspension leading to good homogeneity in both the diamine and the cured epoxy. High resolution transmission electron microscopy (TEM) shows that small ropes of SWNTs (mostly under 15 nm) are present despite the sample's visual homogeneity. Further morphological investigation of cured and uncured D2000 resins using light and small-angle X-ray scattering indicates that the SWNTs are networked into fractal clusters that electrically percolate at low SWNTs loadings (0.05 wt%).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) nanocomposites with optimal mechanical properties

With the ultimate goal to design renewable polymer nanocomposites with optimal mechanical properties, this study reports an investigation of structure-property relationships for a model system - silica/poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHx) nanocomposites. Two molecular weights of PHBHx (M{sub w} = 903,000 g/mol and M{sub w} = 633,000 g/mol) and two types of silica nanoparticles (nominally spheres and fibers according to the manufacturer) were used to prepare the nanocomposites. Small-angle X-ray scattering shows that the sphere and fiber nanoparticles had similar surface areas and primary particle size, but differed in degree of aggregation of the primary particles. The thermal stability of the PHBHx matrix was slightly improved by the addition of nanofillers. Simultaneous improvement of both stiffness and toughness was observed at 1-wt% loading for the higher molecular weight matrix. The more highly aggregated SiO{sub 2} fibers had a greater toughening effect than the SiO{sub 2} spheres. Compared to the unfilled polymer matrix, a 30% increase in Young's modulus and 34% increase in toughness were obtained for the 1-wt% SiO{sub 2} fiber/PHBHx072 nanocomposite. The addition of SiO{sub 2} spheres to PHBHx072 resulted in the same increase in Young's modulus (30%) but a smaller increase (11%) in toughness. The dramatic increases in modulus for PHBHx072 cannot be explained on the basis of two-component micromechanical models. Apparently the filler alters the character of the semicrystalline matrix. When the loading was 3 wt% and above, Young's modulus continued to increase, but the strain at break and toughness decreased. The ultimate strength did not change compared with the unfilled polymer. In order to understand the mechanical properties observed, the thermal behavior, spherulitic morphology and the deformation mechanisms of the nanocomposites and the dispersion state of the nanofillers were studied. We found that a high molecular weight of the polymer matrix, weak interfacial adhesion and a good dispersion of the nanofillers are necessary to improve toughness and stiffness simultaneously.

36 MATERIALS SCIENCE↗

Morphology of PEG-Stabilized Carbon Nanofibers in Water

Small-angle light scattering is used to assess the dispersion of poly(ethylene glycol) (PEG)-functionalized carbon nanofibers suspended in water. Analysis of these data elucidates the mechanism by which the functionalized nanofibers are solubilized in water. Linear, tube-like morphology is observed for the PEG-functionalized nanofibers dispersed in water. However, dispersion is not down to the individual tube level as determined by analysis of the light scattering data in conjunction with transmission electron micrographs. Rather, scattering entities are polydisperse side-by-side fiber aggregates (bundles). Because of the presence of water-soluble PEG oligomers on the surfaces of the nanofibers these small-scale aggregates do not agglomerate to form the large-scale clusters that are observed for untreated and acid-treated nanofibers. Acid-treated nanofibers, by contrast, do agglomerate, but in an unusual fashion, showing a 10-h induction period of followed by linear growth of large-scale agglomerates. PEG-functionalization of the acid-treated fibers leads to stabilization by inhibiting formation of the large-scale agglomerates, not by disrupting the side-by-side bundles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly dispersed nanosilica-epoxy resins with enhanced mechanical properties

Epoxy-nanocomposite resins filled with 12-nm spherical silica particles were investigated for their thermal and mechanical properties as a function of silica loading. The nanoparticles were easily dispersed with minimal aggregation for loadings up to 25 wt% as determined using transmission electron microscopy (TEM) and ultra-small-angle X-ray scattering (USAXS). A proportional decrease in cure temperatures and glass transition temperature (for loadings of 10 wt% and above) was observed with increased silica loading. The morphology determined by USAXS is consistent with a zone around the silica particles from which neighboring particles are excluded. The 'exclusion zone' extends to 10x the particle diameter. For samples with loadings less than 10 wt%, increases of 25% in tensile modulus and 30% in fracture toughness were obtained. More highly loaded samples continued to increase in modulus, but decreased in strength and fracture toughness. Overall, the addition of nanosilica is shown as a promising method for property enhancement of aerospace epoxy composite resins.

36 MATERIALS SCIENCE↗

Temperature responsive hydroxypropyl cellulose for encapsulation

This work focuses on the use of temperature responsive gels (TRGs) (polymeric hydrogels with a large temperature-dependent change in volume) for flavor retention at cooking temperatures. Specifically, we have studied a gel with a lower critical solution temperature (LCST) that swells at low temperatures and collapses at high temperatures. In the collapsed state, the polymer acts as a transport barrier, keeping the volatile flavors inside. We have successfully synthesized a cellulose gel that exhibits this volume change and have encapsulated an oil phase inside the gel. The flavor-loaded encapsulated oil exhibited an increased release time when compared to similar gelatin capsules.

36 MATERIALS SCIENCE↗

Carbon nanofibre reinforcement of soft materials

In elastomeric matrices carbon nanofibres are found to be twenty times more effective than carbon black as a reinforcing filler. In hard matrices, by contrast, reinforcement is minimal. Tensile and dynamic mechanical tests were performed to elucidate the mechanism of reinforcement in order to explain the superior performance in soft matrices. Small-angle neutron scattering and ultra-small-angle X-ray scattering were used to quantify filler morphology, which turns out to be the key factor that limits reinforcement potential. The presence of fractal cluster formed by agglomeration of the nanofibres reduces the effective aspect ratio of the nanotubes. Clustering, however, introduces a new reinforcement mechanism based on elastic deformation of the fibre clusters. This mechanism is operative in soft matrices but not in hard matrices, thus explaining the enhanced performance in soft matrices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗