Search NASA⌕ Search

Engineering topics

Schaidle, Joshua A. (ORCID:0000000321895678)

Publications and source records attributed to Schaidle, Joshua A. (ORCID:0000000321895678).

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Potential Integration Between Residual Biogenic Process Resources and Greener Hydrogen Production from Steam Reformers

Biomass conversion processes have varying efficiencies towards specific products like liquid fuels; process inefficiencies result in byproducts such as off-gases, heat, and solid residues such as char. The efficient use of these byproducts is key towards getting the maximum sustainability benefits from valuable biomass resources. For example, there are various utility product options that can utilize heat and off-gases from biomass pyrolysis processes; they include process heat and steam, hydrogen, fuel gas, and electricity. Further, there is potential for the use of the off-gases to supplement natural gas feed into steam reformers for hydrogen production. This presentation highlights results from previous analyses on tradeoffs based on utility byproduct choices (https://doi.org/10.1039/D3SE00745F); maximizing hydrogen production from off-gases is one potential winning strategy. This leads to the question regarding the utilization of these off-gases in existing steam reformers and the process impacts from feeding off-gases. Process modeling of a steam reformer system (https://doi.org/10.1002/adsu.20230021) quantifies those impacts and shows how much off-gas substitution is possible within the limits of an existing design with such an integration strategy.

biogenic gases↗
DOE OSTI2024

A US perspective on closing the carbon cycle to defossilize difficult-to-electrify segments of our economy

Electrification to reduce or eliminate greenhouse gas emissions is essential to mitigate climate change. However, a substantial portion of our manufacturing and transportation infrastructure will be difficult to electrify and/or will continue to use carbon as a key component, including areas in aviation, heavy-duty and marine transportation, and the chemical industry. In this Roadmap, we explore how multidisciplinary approaches will enable us to close the carbon cycle and create a circular economy by defossilizing these difficult-to-electrify areas and those that will continue to need carbon. Here, we discuss two approaches for this: developing carbon alternatives and improving our ability to reuse carbon, enabled by separations. Furthermore, we posit that co-design and use-driven fundamental science are essential to reach aggressive greenhouse gas reduction targets.

09 BIOMASS FUELS↗
DOE OSTI2024

Progress and roadmap for electro-privileged transformations of bio-derived molecules

Biomass incorporates carbon captured from the atmosphere and can serve as a renewable feedstock for producing valuable chemicals and fuels. Here we look at how electrochemical approaches can impact biomass valorization, focusing on identifying chemical transformations that leverage renewable electricity and feedstocks to produce valorized products via electro-privileged transformations. First, we recommend that the field should explore widening the spectrum of platform chemicals derived from bio-feedstocks, thus offering pathways to molecules that have historically been derived from petroleum. Second, we identify opportunities in electrocatalytic production of energy-dense fuels from biomass that utilize water as the hydrogen source and renewable electricity as the driving force. Finally, we look at the potential in electrochemical depolymerization to preserve key functional groups in raw feedstocks that would otherwise be lost during harsh pre-treatments in traditional depolymerization routes. Finally, on the basis of these priorities, we suggest a roadmap for the integration of biomass and electrochemistry and offer milestones required to tap further into the potential of electrochemical biomass valorization.

electrocatalysis↗
DOE OSTI2022

The Power of Being Negative: Producing H2 and Sequestered Carbon from Biomass and Waste Resources

Hydrogen can serve as an enabler for decarbonizing our economy, especially for the transportation, manufacturing, and chemicals sectors. Low-carbon H2 can be generated through a number of pathways, including (1) steam methane reforming coupled with carbon capture and sequestration, (2) water electrolysis utilizing renewable electricity, (3) methane pyrolysis, and (4) biomass and waste conversion. However, only the biomass and waste conversion pathway offers a route to carbon-negative H2 when coupled with carbon capture and sequestration (CCS), thus providing both a service to our environment through carbon dioxide removal from the atmosphere and a valuable downstream product in H2.

biomass↗
DOE OSTI2022

Accelerating Catalyst Development for Biofuel Production through Multiscale Catalytic Fast Pyrolysis of Biomass over Mo2C

Advanced catalytic materials play an enabling role in producing renewable fuels and chemicals from biomass, thereby helping meet the global climate-change goals set forth by the Intergovernmental Panel on Climate Change. Herein, we present a multiscale approach to accelerate the catalyst-process development cycle for catalytic fast pyrolysis (CFP) of biomass over Mo2C. Mo2C has been shown to possess co-localized acidic and metallic sites and exhibit high activity for deoxygenation of biomass pyrolysis model compounds. However, critical knowledge gaps remain regarding the effectiveness of this catalyst for CFP of whole biomass. We address these knowledge gaps and demonstrate that Mo2C is effective at deoxygenating biomass-pyrolysis products in the presence of H2 but that it undergoes rapid selective and non-selective deactivation. The knowledge gaps addressed from this integrated study, targeting appropriate experiments across scales and feed types, enabled identification of critical modifications for advancing the CFP catalyst-process development cycle.

biofuels↗
DOE OSTI2022

Early-Stage Evaluation of Catalyst Manufacturing Cost and Environmental Impact Using CatCost

The costs and environmental impacts of catalyst manufacture are often neglected during early-stage research because of a lack of accessible, standardized tools to assess them. Here we report the key features of CatCost, a free and public estimation tool for the evaluation of catalyst cost. We demonstrate its functionality with a case study of diverse catalysts (ZSM-5, Pt/TiO2 and Mo2C) for the catalytic fast pyrolysis of biomass. We quantified the economic and environmental improvements made by replacing circulating-bed ZSM-5 with more stable, fixed-bed Pt/TiO2 and Mo2C catalysts, while revealing the effects of synthesis methods and production scale on catalyst costs. The manufacture of ZSM-5 had a large processing cost contribution that was strongly scale dependent, whereas the costs of the other catalysts were dominated by raw materials at all scales. Furthermore, while ZSM-5 costs the least per kilogram, the more stable catalysts cost half as much per gallon of fuel.

BIOMASS FUELS,ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Chapter 3: Power Conversion Technologies: The Advent of Power-to-Gas, Power-to-Liquid, and Power-to-Heat

Decreasing levelized costs of renewable electricity coupled with expanding deployment are enabling a rapid reduction in the carbon intensity of the electrical grid. However, this transition is occurring more slowly in other sectors, including transportation and manufacturing. Power-to-X technologies provide a means to accelerate this transition in those sectors by converting renewable electricity into chemical energy and heat. In this chapter, we provide an overview of the existing and emerging Power-to-X technologies covering the production of methane (hydrogen is covered in Chapter 5) (i.e. Power-to-Gas), chemicals and fuels (e.g. ammonia, carbon monoxide, ethylene, methanol, ethanol, and formic acid), and heat (e.g. for industrial and building applications); discuss the overarching and technology-specific challenges and opportunities; and highlight the implications of deployment of Power-to-X technologies on power generation. We emphasize that Power-to-X technologies do exist today at various stages of development and commercialization and that a transition to lower carbon intensity for the transportation and manufacturing sectors is possible, but it requires immense growth of the electrical grid and appropriate systems design and operations.

ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Throughput Optimization of Molybdenum Carbide Nanoparticle Catalysts in a Continuous Flow Reactor Using Design of Experiments

Transition metal carbides (TMCs) have attracted significant attention because of their applications toward a wide range of catalytic transformations. However, the practicality of their synthesis is still limited because of the harsh conditions in which most TMCs are prepared. Recently, a solution-phase synthesis of phase-pure a-MoC1-x nanoparticles was presented. While this synthetic route yielded nanoparticles with exceptional catalytic performance, the reaction parameter space was not explored, and catalyst throughput was not optimized for scale-up. Continuous flow platforms coupled with statistical design of experiments (DoE) can provide a powerful method for understanding the reaction parameter space for optimizations. Here, we demonstrate the use of statistical DoE in tandem with response surface methodology for a parametric screening analysis to optimize the throughput of a MoC1-x nanoparticle synthesis utilizing a millifluidic flow reactor. A full factorial design was implemented to evaluate four input variables (reaction temperature, flow rate, solvent fraction of oleylamine, and precursor concentration) that carry statistically significant effects on three responses (throughput, residence time, and isolated yield). A Doehlert matrix was implemented to investigate each significant variable at a higher number of levels to optimize throughput. Our results give a nonintuitive set of experimental conditions that resulted in an optimized throughput of 2.2 g h-1. This translates to a 50-fold increase in throughput compared to the previously reported batch method. The catalytic performance of the MoC1-x nanoparticles produced under optimized throughput was demonstrated in the CO2 hydrogenation reaction. This DoE screening analysis and throughput optimization of MoC1-x synthesis open the door to an increased feasibility for scale-up.

design of experiments↗
DOE OSTI2021

Towards cost-competitive middle distillate fuels from ethanol within a market-flexible C2 platform-based biorefinery concept

Ethanol to middle distillates (ETMD) is a promising pathway to produce sustainable liquid fuels to decarbonize the hard-to-electrify transportation sectors due to (1) the abundant sugar/starch and lignocellulosic biomass, (2) the existing deployment scale of fuel ethanol production (similar to 29 billion gallons per year globally), and (3) emerging opportunities in C2+ alcohol synthesis from CO2. Here we report a conceptual market-responsive biorefinery centered around a new ETMD pathway based on one-step ethanol to butene-rich olefins (ETO) over a Cu-Zn-Y/Beta catalyst. Specifically, this ethanol conversion pathway comprises one-step ETO, oligomerization, and hydrotreating. This ETO is distinct from that in the conventional ethanol-to-jet process which is based on two-step ethanol to ethylene and ethylene oligomerization to butenes. Butene-rich olefins can be shifted to butadiene-rich products by simply changing the reaction atmosphere from hydrogen to inert gas over the same ETO catalyst. Leveraging the experimental results, baseline techno-economic analysis (TEA) and sensitivity analysis indicate that the ethanol conversion cost is $0.60 per gallon gasoline equivalent (GGE), with opportunities for further cost reduction via improving the liquid hydrocarbon yield and space velocities, and process optimization on balancing dewatering of ethanol feed prior to the ETO step. The minimum fuel selling price (MFSP) of liquid hydrocarbons derived from corn starch ethanol with butadiene as coproduct is $1.64 per GGE, in the range that is cost competitive with petroleum kerosene-type jet fuel. Projected MFSP for cellulosic ethanol (corn stover) derived hydrocarbons is below $3.00 per GGE and co-production of butadiene further reduces the MFSP to $1.70 per GGE. The Well-to-Wake life-cycle analysis indicates that 85% greenhouse gas emission reduction can be achieved when using corn stover compared to petroleum reference and the associated carbon credits will provide significant economic incentives to favor the cellulosic ethanol-derived hydrocarbon fuels. This study demonstrates a low-cost pathway to middle distillate fuels leveraging existing ethanol infrastructure, where catalysis innovation drives the reduction of process complexity and flexible coproduction of a value-added chemical product.

Zhang, Junyan↗
DOE OSTI2021

Recent Advancements in Catalytic Fast Pyrolysis for the Production of Fuels and Chemicals from Biomass

Catalytic fast pyrolysis (CFP) is a promising biorefinery technology platform for generating both fuel blendstocks and chemical co-products. The versatility of this platform is afforded by (1) the coupling of a thermochemical deconstruction step to a catalytic step that enables tuning of the product slate and (2) the diversity of accessible products across gaseous, liquid, and solid streams. However, there are a number of challenges impeding commercial viability for this CFP platform, including high process costs caused by low carbon efficiency to bio-oil due to coking and light gas formation, the quality and properties of the bio-oil dictate processability for downstream operations, and the heterogeneity of the bio-oil limits quality of resulting fuel blendstocks. This presentation will discuss our efforts to address these challenges through a combined experimental-computational approach to catalyst design and process development, with a specific focus on (1) modifying product composition through catalyst design and (2) generating olefinic and oxygenated chemical co-products.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Predicting Thermal Excursions During in situ Oxidative Regeneration of Packed Bed Catalytic Fast Pyrolysis Catalyst

Ex situ catalytic fast pyrolysis (CFP) uses a secondary reactor to upgrade biomass pyrolysis vapors to stabilized CFP oils with reduced oxygen content. In one configuration, the secondary reactor is operated as a packed-bed swing reactor system which allows coke-deactivated beds to be decarbonized in situ while other beds remain online for vapor upgrading. In situ decarbonization must be done carefully to avoid irreversible deactivation and/or physical degradation of catalyst pellets. Given that packed bed reactors are well known to have poor heat transfer characteristics, this is a critical issue impacting scaleability and commercial viability of the technology. To predict thermal excursions during regeneration, finite element computational models have been built to assist in scaling up oxidative decarbonization of a Pt/TiO2 CFP catalyst (0.5 mm spheres) from a bench scale packed bed with 100 g of catalyst to a pilot scale packed bed with 2 kg of catalyst and internal cooling tubes. Based on transient measurements of outlet temperature and effluent CO2 concentration, and using an assumed coke profile and activation energy, this paper demonstrates that specific combinations of effective thermal conductivity and wall heat transfer coefficient can fit bench scale oxidative regeneration data equally well. For the upscaled 2 kg bed, four bench-scale “best fit” parameter pairs give different predictions for location and magnitude of thermal excursions, with the maximum computed bed temperature gradients ranging from 30 °C cm-1 to as high as 3000 °C cm-1. The larger the fraction of heat removal by conduction through the cooling tubes, the greater the differences between the parameter pairs. The modelling results presented in this paper cast doubt on the industrial viability of the proposed combination of catalyst, bed and regeneration process, and point to the need for alternate reactor designs. However, there is considerable uncertainly in some of the key model parameters. The reliability of model predictions can be increased by adding more temperature measurements at key bed locations, testing additional variations in process conditions, performing careful bed dissections to determine the true coke profile, and perhaps most importantly, directly measuring the effective thermal conductivity of the catalyst pellets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrochemical Reduction Selectivity of Crotonaldehyde on Copper

Lignocellulosic waste is a potential feedstock for the generation of fuels and commodity chemicals, but existing conversion methods are too cost-intensive to be viable long-term solutions. Electrochemical reductions are promising for decentralized biomass valorization due to their modular scaling and capacity to run intermittently and without high temperatures or pressures. Using crotonaldehyde as a multi-functional model compound for the many partially unsaturated oxygenates found in processed biomass, we here demonstrate the production of butanal, butanol, butene, and butane (variously useful as commodity chemicals and major components of liquified petroleum gas) under ambient conditions by reductive bulk electrolysis with a copper mesh working electrode. We identify an optimum potential for reduced organic production under the reaction conditions and compare product distributions from reductions of intermediate species to further propose branching reaction pathways. Though butanal is typically the most abundant product from crotonaldehyde reduction, most of the butene and butane appear to result from a pathway involving initial reduction of the aldehyde group. We discuss evidence that selectivity is driven by interplay between crotonaldehyde reduction, local pH shifts due to the hydrogen evolution reaction, and changes in site reactivity and availability due to electrode fouling. This demonstration of model electrochemical biomass valorization also serves to inform further exploration into reduction of multi-functional molecules and electrochemical biomass processing in general.

biomass↗