Search NASA⌕ Search

Engineering topics

Schenkel, F. W.

Publications and source records attributed to Schenkel, F. W..

The Magsat three axis arc second precision attitude transfer system

The Magsat Attitude Transfer System (ATS), which provides attitude alteration in pitch, yaw, and roll is described. A remote vector magnetometer extends from Magsat on a 20 ft boom, requiring vector orientation by reference to coordinate axes determined by a set of star mapping cameras. The ATS was designed to perform in a solar illuminated environment by using an optically narrow bandwidth with synchronous demodulation at 9300 A. The pitch/yaw optical design, the electrooptics, and signal and switching diagrams are provided. Simple mirrors with no moving parts are placed on the magnetometer to reflect a collimated beam from the ATS for attitude indication, which is accurate to one part in 96. Alignment was completed within 24 hr after launch.

Schenkel, F. W.↗

A three-axis angular monitoring system for the magnetic field satellite /MAGSAT/ mission

An electro-optical attitude transfer system was developed to monitor the angular orientation of magnetometers deployed at the end of a 20-foot boom extending outboard from the Magsat spacecraft. One autocollimator monitors pitch and yaw attitude, cooperating with a plane mirror at the end of the boom; a second monitors roll (twist) from an offset look-angle, using one dihedral reflector at the boom end and a second on the spacecraft. RMS errors due to all causes including linearity, G-forces, cross-coupling and translation are estimated to be 3.9 arcsec over + or - 180 arcsec excursion in pitch and yaw, and 5.3 to 7.5 arcsec over + or - 300 arcsec roll. Design and fabrication problems relative to the remote dihedral refector proved to be the most challenging, and solutions to these problems will be described.

Collyer, P. W.↗

A star sensor for attitude determination

Description of the optical and electronic characteristics of a star sensor developed for the Small Astronomy Satellite B. The specified design goals of the star sensor included an accuracy of 3 arc minutes. Results from field tests and operation in orbit are presented.

Finkel, A.↗

Star sensor/mapper with a self deployable, high-attenuation light shade for SAS-B

A star sensor/mapper to determine positional data for the small astronomy satellites was tested to detect stars of plus 4 visual magnitude. It utilizes two information channels with memory so that it can be used with a low-data-rate telemetry system. One channel yields star amplitude information; the other yields the time of star occurrence as the star passes across an N-slit reticle/photomultiplier detector system. Some of the features of the star sensor/mapper are its low weight of 6.5 pounds, low power consumption of 0.4 watt, bandwidth switching to match the satellite spin rate, optical equalization of sensitivity over the 5-by-10 deg field of view, and self-deployable sunshade. The attitude determination accuracy is 3 arc minutes. This is determined by such parameters as the reticle configuration, optical train, and telemetry readout. The optical and electronic design of the star sensor/mapper, its expansion capabilities, and its features are discussed.

Schenkel, F. W.↗

Star sensor/mapper for the Small Astronomy Satellites.

As a requirement for the Small Astronomy Satellite-B (SAS-B), a star sensor was designed to provide satellite positional data to an accuracy of 3 arc minutes for satellite spin rates of 1/12 rpm and 1 rpm. The star sensor is required to detect stars having a +4 visual magnitude during the sunlit portion of the orbit. The spacecraft orientation can be anything achievable in its near equatorial 500-km orbit. The design of the star sensor resulted in an instrument which weighs 6.5 lbs., consumes 0.4 W and operates at spin rates ranging from 1/12 rpm to 3 rpm. The instrument design incorporates optical features providing excellent uniformity of response across the 5 by 10 deg field of view.

Schenkel, F. W.↗