Search NASA⌕ Search

Engineering topics

Schenter, Gregory K

Publications and source records attributed to Schenter, Gregory K.

At least 19 records

The Aqueous Ca2+ System, in Comparison with Zn2+, Fe3+, and Al3+: An Ab Initio Molecular Dynamics Study

Results of Ab Initio Molecular Dynamics (AIMD) simulations of a Ca2+ ion in an aqueous environment (64 waters, 38ps=5ps equilibration + 33ps data collection, 300K) are reported. The 1st hydration shell contains 6-7 waters with d(OH) = 0.97Å (identical to our bulk water estimate) and average tilt angle, I = 32º. The 1st maximum in the radial distribution function occurs at GCaO(r) = 2.45Å. Our results compare well with published experimental structural data from X-Ray Absorption (XAFS) and Neutron Diffraction. We also generate simulated XAFS spectra using a 1st principles MD-XAFS procedure and show quantitative agreement with experimental XAFS data from a 0.2m Ca(ClO4)2 aqueous solution. The Ca2+ 1st shell water dipole moment of 3.1D is identical to our bulk water estimate (3.1D). The structured 2nd hydration shell, composed of ~16.5 waters, has a maximum at GCaO(r) =4.6Å. The average 2nd shell dipole moment = 2.9D, is suppressed relative to bulk water values. Detailed H-bond analysis demonstrates the waters in this shell predominately coordinate 1st shell waters with a trigonally structured H-bond network. Two exchanges between the 1st hydration shell and the bulk were observed. These were consistent with a dissociative and dissociative interchange Eigen-Wilkins ligand exchange mechanism. Many transfers between the 2nd shell and bulk are detected for Ca2+ allowing an estimation of the 2nd shell mean residence time (MRT) of 4.6ps. Comparison of the Ca2+ hydration shell structure and dynamics with those of the recently reported Zn2+, Fe3+ and Al3+ cation species show that the 1st and 2nd hydration shell parameters, d(M-OI) distance, CNII, H-bond d(OI-OII) distance and %Tetrahedral structure are correlated with cation charge density, the ratio of cation charge (Z) and size (Rion). However, important exceptions are d(M-OII) and the 2nd shell Mean Residence Time (MRT). These differences are explained in terms of the 1st shell structure parameters (d(M-OI) distance and tilt angle I which are strongly influenced by the valence electronic structure of the Ca2+, Zn2+, Fe3+, and Al3+ cation species. The average 2nd shell dipole moment for all cations are found to be suppressed relative to bulk water.

Ab Initio Molecular Dynamics↗

Role of Solvents on the Thermodynamics and Kinetics of Forming Frustrated Lewis Pairs

To enhance our understanding of the role of solvent on the thermodynamics and kinetics of forming Frustrated Lewis pairs (FLP), we carried out a systematic simulation study on these systems in dichloromethane and toluene solvents. These molecular systems are of particular interest due to their relevance in the catalytic hydrogenation and hydrogen storage processes. While the computed structural observables for both molecules are very similar, the slow molecular reorientation was consistent with the size of the species. The computed free energy profiles for the FLP in both solvents show similar gross characteristics but differ in details. We observe two well-defined contact and a solvent-separated regions with different well depths and barrier heights to dissociation. The kinetics of solute-pair interconversion was studied using transition state theory, comparing Kramers and Grote Hynes treatment of the dynamic response of the solvent. These rate results were used to predict solvent effects on dynamical features of contact solute-pair association. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. The calculations were carried out using computer resources provided by BES. Method development benefits M86304. The scientific understanding of the systems studied benefits F63768

Dang, Liem X↗

Analysis of the Activation and Heterolytic Dissociation of H2 by Frustrated Lewis Pairs: NH3/BX3 (X = H, F, and Cl)

We present results of our computational study aimed at understanding the mechanism of H2 activation and heterolytic dissociation by 'frustrated' Lewis pairs (FLPs). We studied the pairs of ammonia (NH3) with BH3, BF3, and most extensively, BCl3. While these pairs are capable of forming a strong dative bond, electronic structure theories make it possible to explore the potential surface in regions away from the dative complex relevant to H2 activation by frustrated Lewis pairs. We analyzed in great detail the changes that occur along the minimum energy path between the FLP and the product ion pair complex. For X = Cl, the mechanism involves a precursor complex, H3N-H2-BCl3, with a B-H-H angle of {approx}80{sup o} and nearly linear N-H-H angle. At the transition state (TS), the H2 bond is weakened but not broken, and the BCl3 moiety has undergone significant pyramidal distortion. As such, the FLP is prepared to accept the incipient proton and hydride ion on the product-side. The interaction energy of the H2 with the acid/base pair and the different contributions for the precursor and TS complex from an energy decomposition analysis expose the dominant factors affecting the reactivity. We find that structural reorganization of precursor complex plays a significant role in the 'activation' and that charge-transfer interactions are the dominant stabilizing force in the activated complex. The electric field clearly has a role in polarizing H2, but its contribution to the overall interaction energy seems to be smaller. Our detailed study of the nature of the bonding and the different types of interaction between the prototypical Lewis pair and H2 provides insight into the important components that should be taken into account when designing related systems to activate hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Vibrational Anharmonicity and Phonon Dispersion in Solid Ammonia Borane

We compute the hydrogen vibrational spectra for bulk ammonia borane (NH3BH3) using harmonic and anharmonic methodologies as well as quantifying dispersive effects to determine their influence on the resulting spectra. Even at 10K the accounting of anharmonic effects on the IINS signal are more significant than approximations introduced by sampling and interpolating a finite simulation cell to capture dispersion effects. We compare our computed anharmonic power spectrum with IINS spectral measurements and find excellent agreement. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences and Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

08 HYDROGEN↗

Structure and Hydrolysis of the U(IV), U(V), and U(VI) Aqua Ions from Ab Initio Molecular Simulations

Ab initio molecular dynamics simulations at 300 K based on density functional theory have been used to study the hydration shell geometries, solvent dipole, and first hydrolysis of the Uranium(IV) (U{sup 4+}) and Uranyl(V) (UO{sub 2}{sup +}) ions in aqueous solution. The solvent dipole and first of hydrolysis of aqueous Uranium(VI) (UO{sub 2}{sup 2+}) has also been probed. The first shell of U{sup 4+} is coordinated by 8-9 water ligands with an average U-O distance of 2.42 {angstrom}. The average first shell coordination number and distance are in agreement with experimental estimates of 8-11 and 2.40-2.44 {angstrom} respectively. The simulated EXAFS spectra of U{sup 4+} matched well with recent experimental data. The first shell of UO{sub 2}{sup +} is coordinated by 5 water ligands in the equatorial plane, with the average U=O{sub ax} and U-O distances being 1.85 {angstrom} and 2.54 {angstrom} respectively. Overall, the hydration shell structure of UO{sub 2}{sup +} matches closely with that of UO{sub 2}{sup 2+} except for small expansions in the average U=O{sub ax} and U-O distances. Each ion strongly polarizes their respective first shell water ligands. The computed acidity constant (pK{sub a}) of U{sup 4+} and UO{sub 2}{sup 2+} are 0.93 and 4.95, in good agreement with the experimental values of 0.54 and 5.24 respectively. The predicted pK{sub a} of UO{sub 2}{sup +} is 8.5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Is Iodate a Strongly Hydrated Cation?

We show, through a combination of density function theory based molecular dynamics simulations (DFTMD) and experimental x-ray absorption fine structure spectroscopy (XAFS) studies, that the iodate ion (IO3-) is a zwitterion in solution. The local region adjoining the I atom is sufficiently electropositive that three hydrating waters are oriented with their O’s atoms directly interacting with the iodine atom at an I-OH2O distance of 2.95 Å. This is the orientation of water hydrating a cation. Further, approximately 2-3 water molecules hydrate each O of IO3 - through a single H atom in an orientation of the water that is expected for an anion at an IOH2O distance of 3.85 Å. We predict that this structure persists, although to a much lesser degree, for BrO3 -, and ClO3 -. This type of local microstructure profoundly affects the behavior of the "anion" at interfaces and how it interacts with other ionic species in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semiempirical Self-Consistent Polarization description of bulk water, the liquid-vapor interface, and cubic ice

We have applied an efficient electronic structure approach, the semiempirical self-consistent polarization neglect of diatomic differential overlap (SCP-NDDO) method, previously parametrized to reproduce properties of water clusters by Chang, Schenter, and Garrett [J. Chem. Phys. 128, 164111 (2008)], and now implemented in the CP2K package, to model ambient liquid water at 300 K (both the bulk and the liquid-vapor interface) and cubic ice at 15 K and 250 K. The SCP-NDDO potential retains its transferability and good performance across the full range of conditions encountered in the clusters and the bulk phases of water. In particular, we obtain good results for the density, radial distribution functions, enthalpy of vaporization, self-diffusion coefficient, molecular dipole moment distribution, and hydrogen-bond populations, in comparison to experimental measurements. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydration Shell Structure and Dynamics of Curium(III) in Aqueous Solution: First Principles and Empirical Studies

Results of ab initio molecular dynamics (AIMD), quantum mechanics/molecular mechanics (QM/MM) and classical molecular dynamics (CMD) simulations of Cm3+ in liquid water at a temperature of 300 K are reported. The AIMD simulation was based on the Car-Parrinello MD scheme and GGA-PBE formulation of density functional theory. Two QM/MM simulations were performed by treating Cm3+ and the water molecules in the first shell quantum mechanically using the PBE (QM/MM-PBE) and the hybrid PBE0 density functionals (QM/MM-PBE0). Two CMD simulations were carried out using ab initio derived pair plus three-body potentials (CMD-3B) and empirical Lennard-Jones pair potential (CMD-LJ). The AIMD and QM/MM-PBE simulations predict average first shell hydration numbers of 8, both of which disagree with recent experimental EXAFS and TRLFS value of 9. On the other hand, the average first shell hydration numbers obtained in the QM/MM-PBE0 and CMD simulations was 9, which agrees with experiment. All the simulations predicted a average first shell and second shell Cm-O bond distances of 2.49-2.53 Å and 4.67-4.75 Å respectively, both of which are in fair agreement with corresponding experimental values of 2.45-2.48 Å and 4.65 Å. The average geometric arrangement of the eight-fold and nine-fold coordinated first shell structures corresponded to the square anti-prism and tricapped trigonal prisms respectively. The second shell hydration number for AIMD QM/MM-PBE, QM/MM-PBE0, CMD-3B, and CMD-LJ, were 15.8, 17.2, 17.7, 17.4, and 16.4 respectively, which indicates second hydration shell over-coordination compared to recent EXAFS experimental value of 13. Save the EXAFS spectra CMD-LJ simulation, all the computed EXAFS spectra agree fairly well with experiment and a clear distinction could not be made between configurations with 8-fold and 9-fold coordinated first shells. The mechanisms responsible for the first shell associative and dissociative ligand exchange in the classical simulations have been analyzed. The first shell mean residence time is predicted to be on the nanosecond timescale. The computed diffusion constants of Cm3+ and water are in good agreement with experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Surface Potential of Water

We have resolved the apparent inconsistency in quantifying the electrochemical surface potential at the liquid-vapor interface when using explicit ab initio electronic charge density and effective atomic partial charge models of liquid water. It is shown that regions of space must be excluded for the evaluation of the electric potential from a charge distribution to be useful in the interpretation of electrochemical measurements. This is not the case for work functions, electron diffraction or electron holography measurements. We find that the resulting electric potentials from partial charge models and ab initio charge distributions are quite different except for those regions of space between the molecules where the electron density is nearly zero. We compare our computed ab initio surface potential with high-energy electron diffraction and holography measurements and find good agreement. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the hydration structure of polarizable halides: a multi-edge XAFS and molecular dynamics study of the iodide anion.

A comprehensive analysis of the H2O structure about aqueous iodide (I-) is reported from molecular dynamics (MD) simulation and x-ray absorption fine structure (XAFS) measurements. XAFS spectra from the iodide K-, L1-, and L3- edges were co-refined to establish the complete structure of the first hydration shell about aqueous I-. The results show approximately 6.3 water molecules located at I-H and I-O distances of 2.65 Å and 3.50 Å, respectively. Whereas the I-O bond is moderately disordered (Debye Waller factor, σ2 = 0.017 Å2) due to the relatively low charge-to-ion radius ratio, the I-H interaction shows even higher disorder (σ2 = 0.036 Å2) due to the variable angular orientation of water at the ion surface. Molecular dynamics simulations employing both DFT (+dispersion) and classical potentials generate quite similar structures and they both agree to a large extent with the structure from the experimental XAFS. However the DFT-MD simulations provide a description of molecular structure that is more consistent with the XAFS experiment data. We employ a molecular anaylsis in which we incrementally evaluate the structural contributions from each of the nearest-neighbor water molecules about the iodide to provide a clear picture of the hydrated structure. For the DFT description of molecular interaction, a water molecule in the first shell has more freedom to rotate about the O atom when compared to motions resulting from a classical potential. Further, the hydrogen bonding of first-shell water with the second shell water establishes an strong ordering of the water about I- surface leading to characteristic O-I-O angles of 79 and 142°. This ordering, in addition to the higher coordination number leads to a more symmetric solvation from the DFT-MD configurations relative to the classical potential simulation.

08 HYDROGEN↗

The diammoniate of diborane: Crystal structure and hydrogen release

[(NH3)2BH2]+[BH4]- is formed from the room temperature decomposition of NH4+BH4-, via a NH3BH3 intermediate. Its crystal structure has been determined and contains disordered BH4- ions in 2 distinct sites. Hydrogen release is similar to that from NH3BH3 but with faster kinetics.

08 HYDROGEN↗

Theoretical Investigations on the Formation and Dehydrogenation Reaction Pathways of H(NH2BH2)nH (n=1-4) Oligomers: Importance of Dihydrogen Interactions (DHI)

The H(NH2BH2)nH oligomers are possible products from dehydrogenation of ammonia borane (NH3BH3) and ammonium borohydride (NH4BH4), which belong to a class of boron-nitrogen-hydrogen (BNHx) compounds that are promising materials for chemical hydrogen storage. Understanding the kinetics and reaction pathways of formation of these oligomers and their further dehydrogenation is essential for developing BNHx-based hydrogen storage materials. We have performed computational modeling using density functional theory (DFT), ab initio wavefunction theory, and Car-Parrinello molecular dynamics (CPMD) simulations on the energetics and formation pathways for the H(NH2BH2)nH (n=1-4) oligomers, polyaminoborane (PAB), from NH3BH3 monomers and the subsequent dehydrogenation steps to form polyiminoborane (PIB). Through transition state searches and evaluation of the intrinsic reaction coordinates, we have investigated the B-N bond cleavage, the reactions of NH3BH3 molecule with intermediates, dihydrogen release through intra- and intermolecular hydrogen transfer, dehydrocoupling/cyclization of the oligomers, and the dimerization of NH3BH3 molecules. We discovered the formation mechanism of H(NH2BH2)n+1H oligomers through reactions of the H(NH2BH2)nH oligomers first with BH3 followed by reactions with NH3 and the release of H2, where the BH3 and NH3 intermediates are formed through dissociation of NH3BH3. We also found that the dimerization of the NH3BH3 molecules to form c-(NH2BH2)2 is slightly exothermic, with an unexpected transition state that leads to the simultaneous release of two H2 molecules. The dehydrogenations of the oligomers are also exothermic, typically by less than 10 kcal/(mol of H2), with the largest exothermicity for n=3. The transition state search shows that the one-step direct dehydrocoupling cyclization of the oligomers is not a favored pathway because of high activation barriers. The dihydrogen bonding, in which protic (HN) hydrogens interact with hydridic (HB) hydrogens, plays a vital role in stabilizing different structures of the reactants, transition states, and products. The dihydrogen interaction (DHI) within the -BH2(η2-H2) moiety accounts for both the formation mechanisms of the oligomers and for the dehydrogenation of ammonia borane. Support was provided from the U.S. Department of Energy, Office of Basic Energy Sciences, Chemical Sciences Division and from the U.S. Department of Energy, Energy Efficiency and Renewable Energy, Chemical Hydrogen Storage Center of Excellence. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

08 HYDROGEN↗

Improving the density functional theory description of water with self-consistent polarization

We present a comprehensive set of results for water, a case study of a hydrogen-bonded system, using the self-consistent polarization density functional theory (SCP-DFT). With minimal parametrization, SCP-DFT is found to give good results for the interaction energy of the dimer; the geometries, cohesion energies, and harmonic frequencies of larger clusters; and the structure and enthalpy of the liquid, as compared to accurate theoretical and experimental benchmarks. We also compared our SCP-DFT potential to the base DFT BLYP potential and also to a simpler dispersion-supplemented potential, BLYP-D. Using the symmetry-adapted perturbation theory (with a DFT description of monomers), the BLYP, BLYP-D, and SCP-DFT water dimer potentials were analyzed into their physically interpretable components. Comparison with the benchmark SAPT(DFT) components showed reasonable agreement for all the four components of electrostatics, exchange, induction, and dispersion energies. This procedure enhances understanding and can suggest further improvements. Thus, the SCP-DFT approach holds promise as a fast, efficient, and accurate method for performing ab initio dynamics that include additional polarization and dispersion interactions for large, complex systems involving solvation and bond breaking.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrated Structure of Ag(I) Ion from Symmetry-Dependent, K- and L-edge XAFS Multiple Scattering and Molecular Dynamics Simulations

Details of the first-shell water structure about Ag+ are reported from a co-refinement of the K- and L2-edge multiple scattering signal in the x-ray absorption fine structure (XAFS) spectra. Detailed fits at the Ag K-edge that include the contributions from multiple scattering processes in the hydrated ion structure cannot distinguish between models containing tetrahedral symmetry versus those containing collinear O-Ag-O bonds. However, we show that the multiple scattering oscillations at the L2- edges have distinctly different phase and amplitude functions than at the K-edge. These phase and amplitude functions depend not only on the scattering symmetry of the multiple scattering paths but also on the nature of the final state electronic wavefunction probed by the dipole allowed transition. Hence the multiple scattering portions of K- and L2- edge spectra provide independent measurements of the local symmetry - not a redundant measurement as is commonly believed. On the basis of the enhanced information content obtained by the simultaneous assessment of both the K and L2-edges we report that the hydrated Ag+ structure consists of both 90° and collinear O-Ag-O bonds that is approximately represented as a distorted trigonal bi-pyramidal structure. Finally the K and L2-edge spectra are used to benchmark the hydration structure that is generated from both DFT-based and classical molecular dynamics simulations. Simulated first-shell structures are compared to the experimental structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of C1O radical with liquid water

In the present work, the interaction between ClO radical and liquid water is studied using molecular dynamics simulations. We perform simulations of collisions of a ClO radical with the surface of liquid water to understand the accommodation of ClO by liquid water. Simulations results show that the ClO radical has a higher propensity to be adsorbed on the air-water interface than be dissolved in the bulk. The free energy profile is also calculated and the solvation free energy and Henry’s law constant is determined for ClO as, ΔGs, of -2.9 kcal/mol and 5.5 M/atm, respectively. The mechanism of the ClO recombination reaction is also discussed and the results are consistent with laboratory findings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic and Structural Investigations of Ammonium Borohydride, a Solid with a Highest Content of Thermodynamically and Kinetically Accessible Hydrogen

The US DOE issued a Grand Challenge for Basic Research Needs for the Hydrogen Economy calling in part for significant new breakthroughs in novel materials and approaches to store hydrogen on-board fuel cell powered vehicles. The Challenge specified several technical criteria for hydrogen storage materials that are necessary to provide sufficient energy density to drive a Fuel Cell powered vehicle >300 miles between refueling. The formation of AB catalyzing the decomposition of NH4BH4 to DADB and hydrogen provides insight into why NH4BH4 appears to be less stable than predicted by electronic structure theory. Further work is planned to investigate the structure of NH4BH4 by neutron diffraction to see if it is possible to induce a phase change at lower temperatures to the zincblende structure predicted to be the most stable structure at 0 K. This work was supported by the Office of Basic Energy Sciences, Chemical Sciences Division of the U.S. Department of Energy (DOE). A portion of the research described in this paper was performed in the W.R. Wiley Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. Pacific Northwest National Laboratory is operated for the DOE by Battelle.

08 HYDROGEN↗