Engineering topics

Schmidt, D. K.

Publications and source records attributed to Schmidt, D. K..

51 records · Page 3

NASA NTRS1983

Pilot modeling and closed-loop analysis of flexible aircraft in the pitch tracking task

The issue addressed in the appropriate modeling technique for pilot vehicle analysis of large flexible aircraft, when the frequency separation between the rigid-body mode and the dynamic aeroelastic modes is reduced. This situation was shown to have significant effects on pitch-tracking performance and subjective rating of the task, obtained via fixed base simulation. Further, the dynamics in these cases are not well modeled with a rigid-body-like model obtained by including only 'static elastic' effects, for example. It is shown that pilot/vehicle analysis of this data supports the hypothesis that an appropriate pilot-model structure is an optimal-control pilot model of full order. This is in contrast to the contention that a representative model is of reduced order when the subject is controlling high-order dynamics as in a flexible vehicle. The key appears to be in the correct assessment of the pilot's objective of attempting to control 'rigid-body' vehicle response, a response that must be estimated by the pilot from observations contaminated by aeroelastic dynamics. Finally, a model-based metric is shown to correlate well with the pilot's subjective ratings.

Schmidt, D. K.↗

NASA NTRS1983

Integrated pilot - Optimal augmentation synthesis for complex flight vehicles: Experimental validation

The purpose of this work is to present an experimental validation via fixed-base simulation of analytical methods for predicting handling qualities of flight vehicles. Different augmented dynamics are considered and analytical predictions of performance and pilot rating obtained. A flight simulation is then performed and comparison between experiment and theoretical data is shown.

Innocenti, M.↗

NASA NTRS1982

A modern approach to pilot/vehicle analysis and the Neal-Smith criteria

The present investigation is concerned with the development of a better pilot modelling technique via optimal control theory, taking into account concepts concerning 'pilot rating' considered by Neal and Smith (1970). The investigation conducted by Neal and Smith had the objective to provide data on the effects of Flight Control System dynamics and to develop a design criterion capable of pinpointing pilot problem areas encountered in performing a given task. Neal and Smith devised a 'pilot-in-the-loop' analysis capable of showing problem areas in pitch attitude tracking. Unfortunately the employed method has some drawbacks. The current investigation attempts, therefore, to provide an alternate approach which makes use of an optimal-control pilot model. An optimal control model (OCM) had been discussed by Kleinman et al. (1970). It is shown that the alternate approach, based on the OCM, offers some distinct advantages.

Bacon, B. J.↗

NASA NTRS1982

Time Domain Identification of an Optimal Control Pilot Model with Emphasis on the Objective Function

A method for the identification of the pilot's control compensation using time domain techniques is proposed. From this information we hope to infer a quadratic cost function, supported by the data, that represents a reasonable expression for the pilot's control objective in the task being performed, or an inferred piloting strategy. The objectives for this method are: (1) obtain a better understanding of the fundamental piloting techniques in complex tasks, such as landing approach; (2) the development of a metric measurable in simulations and flight test that correlate with subjective pilot opinion; and (3) to further validate pilot models and pilot vehicle analysis methods.

Schmidt, D. K.↗

NASA NTRS1982

Quadratic synthesis of integrated active controls for an aeroelastic forward-swept-wing-aircraft

State variable representations of flexible aircraft are obtained using a modeling approach which first defines a mean-reference axis coordinate system. The active system design approach for forward-swept-wing aircraft also expresses structural deformations of the wing in terms of free normal vibration modes relative to this mean reference axis. Calculations which assume quasi-steady incompressible aerodynamics are performed to obtain generalized force expressions for flight conditions. The use of this quadratic synthesis technique shows that increased performance and redundancy over decentralized approaches can be achieved using integrated active longitudinal stability augmentation and aeroelastic stabilization.

Gilbert, M. G.↗

NASA NTRS1981

Multivariable closed loop control analysis and synthesis for complex flight systems

A flight control system analysis and synthesis method is presented that is intended to be especially suitable for application to vehicles exhibiting complex dynamic characteristics. For such vehicles quantitative handling qualities specifications are not usually available. Howver, handling qualities objectives are specifically introduced in this method via the hypothesis of correlation between pilot ratings and the objective function of an optimal control model of the human pilot. Further, since augmentation and pilot operate in parallel, simultaneous determination of the augmentation and pilot model gains is required. Desirable augmented dynamics are obtained for a variety of complex systems and the method is experimentally verified in the case of simple pilot damper gain selection for optimum pitch tracking performance.

Schmidt, D. K.↗

NASA NTRS1981

Interactive aircraft flight control and aeroelastic stabilization

Several examples are presented in which flutter involving interaction between flight mechanics modes and elastic wind bending occurs for a forward swept wing flight vehicle. These results show the basic mechanism by which the instability occurs and form the basis for attempts to actively control such a vehicle.

Weisshaar, T. A.↗

NASA NTRS1981

On the use of the OCM's quadratic objective function as a pilot rating metric

A correlation between the magnitude of the quadratic objective function from an optimal control pilot model and the subjective rating of the vehicle and task provides a valuable tool for handling qualities research and flight control synthesis. An analysis of simulation results for fourteen aircraft configurations flight tested earlier was conducted. A fixed set of pilot model parameters, are found for all cases in modeling the simulated regulation task. The agreement obtained between performance statistics is shown and a strong correlation was obtained between the cost function and rating.

Schmidt, D. K.↗

NASA NTRS1981

Pilot-optimal multivariable control synthesis by output feedback

A control system design approach for optimal stability augmentation, systems, using limited state feedback theory with the specific inclusion of the human pilot in the loop is presented. The methodology is especially suitable for application to flight vehicles exhibiting nonconventional dynamic characteristics and for which quantitative handling qualities specifications are not available. The design is based on a correlation between pilot ratings and objective function of the optimal control model of the human pilot. Simultaneous optimization for augmentation and pilot gains are required.

Schmidt, D. K.↗

NASA NTRS1978

Pilot-optimal augmentation synthesis

An augmentation synthesis method usable in the absence of quantitative handling qualities specifications, and yet explicitly including design objectives based on pilot-rating concepts, is presented. The algorithm involves the unique approach of simultaneously solving for the stability augmentation system (SAS) gains, pilot equalization and pilot rating prediction via optimal control techniques. Simultaneous solution is required in this case since the pilot model (gains, etc.) depends upon the augmented plant dynamics, and the augmentation is obviously not a priori known. Another special feature is the use of the pilot's objective function (from which the pilot model evolves) to design the SAS.

Schmidt, D. K.↗

NASA NTRS1977

Effects of control laws and relaxed static stability on vertical ride quality of flexible aircraft

State variable techniques are utilized to generate the RMS vertical load factors for the B-52H and B-1 bombers at low level, mission critical, cruise conditions. A ride quality index is proposed to provide meaningful comparisons between different controls or conditions. Ride quality is shown to be relatively invariant under various popular control laws. Handling quality variations are shown to be major contributors to ride quality variations on both vehicles. Relaxed static stability is artificially implemented on the study vehicles to investigate its effects on ride quality. The B-52H ride quality is generally degraded when handling characteristics are automatically restored by a feedback control to the original values from relaxed stability conditions. The B-1 airplane shows little ride quality sensitivity to the same analysis due to the small rigid body contribution to load factors at the flight condition investigated.

Roberts, P. A.↗

NASA NTRS1977

An analytical method for ride quality of flexible airplanes

A new and easily used method of aircraft ride quality analysis is developed, and its use is illustrated by a numerical example using DC-8 airplane equations of motion. The method readily allows any type of stability augmentation system to be included for good handling qualities. A particularly powerful method of specifying and achieving all roots of a desired closed-loop characteristic equation by use of full state variable feedback is described and applied to the DC-8 example.

Swaim, R. L.↗

NASA NTRS1976

Ride quality sensitivity to SAS control law and to handling quality variations

The RQ trends which large flexible aircraft exhibit under various parameterizations of control laws and handling qualities are discussed. A summary of the assumptions and solution technique, a control law parameterization review, a discussion of ride sensitivity to handling qualities, and the RQ effects generated by implementing relaxed static stability configurations are included.

Roberts, P. A.↗

NASA NTRS1976

An analytical method for ride quality of flexible airplanes

A new and easily used state variable method of aircraft ride quality analysis is developed and its use is illustrated by a numerical example using DC-8 airplane equations of motion. The method readily allows any type of stability augmentation system to be included for good handling qualities. As part of the ride quality analysis, a particularly powerful method of specifying and achieving all roots of a desired closed-loop characteristic equation by use of full state variable feedback is described and applied to the DC-8 example.

Swaim, R. L.↗

NASA NTRS1970

Preliminary design of a tornado probe

Rocket probe launched by aircraft for measuring pressure, temperature, magnetic field and wind velocity around tornado vortex through radio telemetry

Agee, E. M.↗