Search NASA⌕ Search

Engineering topics

Schneider, Claus M.

Publications and source records attributed to Schneider, Claus M..

THz generation by exchange-coupled spintronic emitters

Abstract The mechanism of THz generation in ferromagnet/metal (F/M) bilayers has been typically ascribed to the inverse spin Hall effect (ISHE). Here, we fabricated Pt/Fe/Cr/Fe/Pt multilayers containing two back-to-back spintronic THz emitters separated by a thin ( t Cr ≤ 3nm) wedge-shaped Cr spacer. In such an arrangement, magnetization alignment of the two Fe films can be controlled by the interplay between Cr-mediated interlayer exchange coupling (IEC) and an external magnetic field. This in turn results in a strong variation of the THz amplitude A , with A ↑ ↓ reaching up to 14 times A ↑ ↑ (arrows indicate the relative alignment of the magnetization of the two magnetic layers). This observed functionality is ascribed to the interference of THz transients generated by two closely spaced THz emitters. Moreover, the magnetic field dependence A ( H ) shows a strong asymmetry that points to an additional performance modulation of the THz emitter via IEC and multilayer design.

Adam, Roman↗

Terahertz inverse spin Hall effect in spintronic nanostructures with various ferromagnetic materials

Bilayers of ferromagnetic and heavy metal nanolayers excited with femtosecond laser pulses emit subpicosecond bursts of electromagnetic radiation with spectral frequencies up to several THz. We fabricated such spintronic THz emitters containing various ferromagnetic materials with vastly different magnetic remanence, saturation magnetization, and coercive fields. In all cases, the THz amplitude versus magnetic-field dependence follows the independently measured magnetization hysteresis loops and the THz polarization direction is perpendicular to the sample’s magnetization M, both consistent with the inverse spin Hall effect (ISHE) as the physical origin. The mV-level signals of observed THz transient also favor the ISHE over the anomalous Nernst effect (ANE). The M(T) variation governs the temperature dependence of the THz generation. Emitters with weakly remanent ferromagnets are magnetic-field tunable, while moderately and strongly remanent ferromagnets, once magnetized, allow intense THz generation even without an external field, nevertheless exhibiting low susceptibility to magnetic perturbations if the hysteresis loop is square. Hence, exploiting the magnetic properties of the ferromagnetic layer enables tailoring of weakly temperature-dependent spintronic THz emitters. Finally, we explored the applicability of perovskite oxide materials such as La-Sr-Mn-O (LSMO) for THz transient generation. We detected weak (<40-μV amplitude) THz emissions from both LSMO/Au and pure LSMO nanostructures with no sign flip upon the sample reversal. Furthermore, we excluded the ISHE and believe it was likely governed by the ANE in the thick-film regime, although we cannot exclude the transient demagnetization mechanism.

36 MATERIALS SCIENCE↗

Determination of Thermal Damage Threshold in THz Photomixers Using Raman Spectroscopy

The increase of device lifetime and reliability of THz photomixers will play an essential role in their possible future application. Therefore, their optimal work conditions/operation range, i.e., the maximal incident optical power should be experimentally estimated. We fabricated and tested THz photomixer devices based on nitrogen-implanted GaAs integrated with a Bragg reflector. Raman spectroscopy was applied to investigate the material properties and to disclose any reversible or irreversible material changes. The results indicate that degradation effects in the photomixer structures/material could be avoided if the total optical power density does not exceed levels of about 0.7 mW/µm 2 for 100 min of operation. Furthermore, the investigations performed during 1000 min of optical exposure on the photomixer devices’ central region comprising interdigitated metal-semiconductor-metal (MSM) structures suggest a reversible “curing” mechanism if the power density level of ~0.58 mW/µm 2 is not exceeded. Long-term operation (up to 1000 h) reveals that the photomixer structures can withstand an average optical power density of up to ~0.4 mW/µm 2 without degradation when biased at 10 V. Besides the decrease of the position of the A1g (LO) Raman mode from ~291 cm -1 down to ~288 cm -1 with increasing optical power density and operation time, broad Raman modes evolve at about 210 cm -1 , which can be attributed to degradation effects in the active photomixer/MSM area. In addition, the performed carrier lifetime and photomixer experiments demonstrated that these structures generated continuous wave sub-THz radiation efficiently as long as their optimal work conditions/operation range were within the limits established by our Raman studies.

36 MATERIALS SCIENCE↗

Correlating Tomographic Chemical Inhomogeneity and Low Energy Electronic Structure in Layered Quantum Materials

Photoemission spectroscopy (PES) is a suite of experimental tools to learn about the electronic and chemical structure of materials and surfaces. Normally implemented in a surface-sensitive manner, the research performed under this grant focused on pushing PES into less explored regimes, to reveal bulk electronic structure, to reveal tomographic (layer-resolved) chemistry and electronic structure of layered materials and heterostructures, and to reveal interface phenomena at the junction of two different materials. Standing wave (SW) spectroscopies have also been applied to PdCoO2, a material of interest due to its high conductivity and electron-hydrodynamic tendencies. This material can be modeled as an alternating layered structure consisting of metallic Pd layers and insulating CoO2 layers. Using SW XPS, the total electronic structure has been decomposed into contributions from the two layers, and computations highlighted the different many-body interactions in the two layers (Comm. Phys. 4, 143 (2021)). We have also used hard-x-ray angle-resolved photoemission spectroscopy (ARPES), to investigate LaB6, a technologically important material with widespread application as a cathode material for electron microscopes. We measured the bulk electronic structure of this material and found that the one-step model of photoemission better captured the electronic structure and correlations. This model treats the three steps of the photoemission process—excitation, transport of the photoelectron to the crystal surface, and escape into the vacuum—as a single quantum mechanically coherent process (Phys. Rev. Mater. 5, 055002 (2021)). We also applied x-ray photoelectron spectroscopy, implemented in a near total reflection grazing incidence geometry to elucidate technologically relevant interfaces, such as those between a substrate and photoresist (J. Phys. D: Appl. Phys. 54 464002 (2021)).

36 MATERIALS SCIENCE↗

Emergent phenomena at oxide interfaces studied with standing-wave photoelectron spectroscopy

Emergent phenomena at complex-oxide interfaces have become a vibrant field of study in the past two decades due to the rich physics and a wide range of possibilities for creating new states of matter and novel functionalities for potential devices. The electronic-structural characterization of such phenomena presents a unique challenge due to the lack of direct yet nondestructive techniques for probing buried layers and interfaces with the required Ångstrom-level resolution, as well as element and orbital specificity. In this Review, we survey several recent studies wherein soft x-ray standing-wave photoelectron spectroscopy—a relatively newly developed technique—is used to investigate buried oxide interfaces exhibiting emergent phenomena such as metal-insulator transition, interfacial ferromagnetism, and two-dimensional electron gas. The advantages, challenges, and future applications of this methodology are also discussed.

36 MATERIALS SCIENCE↗

Orbital contributions in the element-resolved valence electronic structure of Bi 2 Se 3

In this work, we studied the bulk band structure of a topological insulator (TI) Bi 2 Se 3 and determined the contributions of the Bi and Se orbital states to the valence bands using standing-wave excited hard x-ray photoemission spectroscopy (SW-HAXPES). This SW technique can provide the element-resolved information and extract individual Bi and Se contributions to the Bi2Se3 valence band. Comparisons with density-functional theory calculations (local density approximation and GW) reveal that the Bi 6s, Bi 6p, and Se 4p states are dominant in the Bi 2 Se 3 HAXPES valence band. Furthermore, these findings pave a way for studying the element-resolved band structure and orbital contributions of this class of TIs.

36 MATERIALS SCIENCE↗

Bulk electronic structure of lanthanum hexaboride (LaB 6 ) by hard x-ray angle-resolved photoelectron spectroscopy

In the last decade rare-earth hexaborides have been investigated for their fundamental importance in condensed matter, and for their applications in advanced technological fields. Among these compounds, LaB 6 has a special place, being a traditional d-band metal without additional f- bands. In order to understand the bulk electronic structure of the more complex rare-earth hexaborides, in this paper we investigate the bulk electronic structure of LaB 6 using tender/hard x-ray photoemission spectroscopy, measuring both core-level and angle-resolved valence-band spectra. Furthermore, we compare the La 3d core level spectrum to cluster model calculations in order to understand the bulk-like core-hole screening effects. The results show that the La 3d well-screened peak is at a lower binding energy compared to the main poorly-screened peak; the relative intensity between these peaks depends on how strong the hybridization is between La and B atoms. Here, we show that the recoil effect, negligible in the soft x-ray regime, becomes prominent at higher kinetic energies for lighter elements, such as boron, but is still negligible for heavy elements, such as lanthanum. In addition, we report the bulk-like band structure of LaB6 determined by tender/hard x-ray angle-resolved photoemission spectroscopy (HARPES). We compare HARPES experimental results to the free-electron final-state calculations and to the more precise one-step photoemission theory including matrix element and phonon excitation effects. The agreement between the features present in the experimental ARPES data and the theoretical calculations is very good. In addition, we consider the nature and the magnitude of phonon excitations in order to interpret HARPES experimental data measured at different temperatures and excitation energies. We demonstrate that one step theory of photoemission and HARPES experiments provide, at present, the only approach capable of probing, both experimentally and theoretically, true “bulk-like” electronic band structure of rare-earth hexaborides and strongly correlated materials.

36 MATERIALS SCIENCE↗

Two-dimensional electron systems in perovskite oxide heterostructures: Role of the polarity-induced substitutional defects

The discovery of a two-dimensional electron system (2DES) at the interfaces of perovskite oxides such as LaAlO 3 and SrTiO 3 has motivated enormous efforts in engineering interfacial functionalities with this type of oxide heterostructures. However, the fundamental origins of the 2DES are still not understood, e.g., the microscopic mechanisms of coexisting interface conductivity and magnetism. In this paper, we report a comprehensive spectroscopic investigation on the depth profile of 2DES-relevant Ti 3d interface carriers using depth- and element-specific techniques like standing-wave excited photoemission and resonant inelastic scattering. We found that one type of Ti 3d interface carriers, which give rise to the 2DES are located within three unit cells from the n-type interface in the SrTiO 3 layer. Unexpectedly, another type of interface carriers, which are polarity-induced Ti-on-Al antisite defects, reside in the first three unit cells of the opposing LaAlO3 layer (~10 Å). Our findings provide a microscopic picture of how the localized and mobile Ti 3d interface carriers distribute across the interface and suggest that the 2DES and 2D magnetism at the LaAlO 3 /SrTiO 3 interface have disparate explanations as originating from different types of interface carriers.

36 MATERIALS SCIENCE↗

Establishing structure-sensitivity of ceria reducibility: real-time observations of surface-hydrogen interactions

The first layer of atoms on an oxide catalyst provides the first sites for adsorption of reactants and the last sites before products or oxygen are desorbed. We employ a unique combination of morphological, structural, and chemical analyses of a model ceria catalyst with different surface terminations under an H 2 environment to unequivocally establish the effect of the last layer of atoms on surface reduction. (111) and (100) terminated epitaxial islands of ceria are simultaneously studied in situ allowing for a direct investigation of the structure–reducibility relationship under identical conditions. Kinetic rate constants of Ce 4+ to Ce 3+ transformation and equilibrium concentrations are extracted for both surface terminations. Unlike the kinetic rate constants, which are practically the same for both types of islands, more pronounced oxygen release, and overall higher reducibility were observed for (100) islands compared to (111) ones. The findings are in agreement with coordination-limited oxygen vacancy formation energies calculated by density functional theory. The results point out the important aspect of surface terminations in redox processes, with particular impact on the catalytic reactions of a variety of catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗