Search NASA⌕ Search

Engineering topics

Schneiderman, Deborah K.

Publications and source records attributed to Schneiderman, Deborah K..

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Open-to-Air RAFT Polymerization in Complex Solvents: From Whisky to Fermentation Broth.

We investigate the use of in situ enzyme degassing to facilitate the open-to-air reversible addition- fragmentation chain transfer (RAFT) polymerization of hydroxyethyl acrylate (HEA) in a wide range of complex aqueous solvents, including, beer, wine, liquor, and fermentation broth. This enzyme-assisted polymerization procedure is impressively robust, and poly(HEA) was attained with good control over molecular weight and a narrow dispersity in nearly all of the solvents tested. Kinetics experiments on HEA polymerization in whisky and spectroscopic analysis of the purified polymers suggest high end-group fidelity, as does the successful chain extension of a poly(HEA) macro chain transfer agent with narrow dispersity. These results suggest enzyme-assisted RAFT may be a powerful and underutilized tool for high-throughput screening and materials discovery and may simplify the synthesis of well-defined polymers in complex conditions.

Schneiderman, Deborah K.↗
DOE OSTI2017

Printable, Degradable, and Biocompatible Ion Gels from a Renewable ABA Triblock Polyester and a Low Toxicity Ionic Liquid

We have designed printable, biocompatible, and degradable ion gels by combining a novel ABA triblock aliphatic polyester, poly(ε-decalactone)-b-poly(dl-lactide)-b-poly(ε-decalactone), and a low toxicity ionic liquid, 1-butyl-1-methylpyrrolidinium bistrifluoromethanesulfonylimide ([P14][TFSI]). Due to the favorable compatibility between amorphous poly(dl-lactide) and [P14][TFSI] and the insolubility of the poly(ε-decalactone), the triblock polymer forms self-assembled micellar cross-links similar to thermoplastic elastomers, which ensures similar processing conditions and mechanical robustness during the fabrication of printed electrolyte-gated organic transistor devices. Additionally, the ester backbone in the polymer structure enables efficient hydrolytic degradation of these ion gels compared to those made previously using carbon-backbone polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Design of Graft Block Polymer Thermoplastics

Graft block polymers are defined by several architectural parameters, including backbone flexibility, graft density, backbone length, side-chain composition, and side-chain length. In this work we probe the impacts of each of these parameters on the phase behavior, rheological properties, and mechanical performance of these materials. Specifically, we examine two sets of materials prepared from backbones of different inherent flexibility. One set was prepared from poly[(n-butyl acrylate)-co-(2-hydroxyethyl acrylate)] (B$_x$E$_y$) copolymers; the other was prepared from hydroxypropyl methyl cellulose (HPMC) samples. Sequential ring-opening transesterification polymerization from these hydroxyl-functionalized macroinitiatiors yielded a diblock graft architecture containing a rubbery interior block and semicrystalline exterior blocks tethered to a flexible (B$_x$E$_y$) or rigid (HPMC) backbone. Good control over side-chain molar mass and composition and judicious choice of the graft block segments enabled the preparation of materials that were either ordered or disordered in the melt state. In the former case, crystallization destroys existing order in the material; in the latter case crystallization induces new microphase separation in the bulk. Many of the structure–mechanical property relationships observed for graft block copolymers with rigid backbones are maintained for graft block polymers with semiflexible backbones, including the tendency for samples to remain transparent when stretched. However, interestingly, we note the effects of graft density and backbone length are quite different depending on the rigidity of the backbone.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Tough and Sustainable Graft Block Copolymer Thermoplastics

Fully sustainable poly[HPMC-g-(PMVL-b-PLLA)] graft block copolymer thermoplastics were prepared from hydroxypropyl methylcellulose (HPMC), β-methyl-δ-valerolactone (MVL), and l-lactide (LLA) using a facile two-step sequential addition approach. In these materials, rubbery PMVL functions as a bridge between the semirigid HPMC backbone and the hard PLLA end blocks. This specific arrangement facilitates PLLA crystallization, which induces microphase separation and physical cross-linking. By changing the backbone molar mass or side chain composition, these thermoplastic materials can be easily tailored to access either plastic or elastomeric behavior. Moreover, the graft block architecture can be utilized to overcome the processing limitations inherent to linear block polymers. Good control over molar mass and composition enables the deliberate design of HPMC-g-(PMVL-b-PLLA) samples that are incapable of microphase separation in the melt state. These materials are characterized by relatively low zero shear viscosities in the melt state, an indication of easy processability. The simple and scalable synthetic procedure, use of inexpensive and renewable precursors, and exceptional rheological and mechanical properties make HPMC-g-(PMVL-b-PLLA) polymers attractive for a broad range of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Poly(lactide)-block-poly([epsilon]-caprolactone-co-[epsilon]-decalactone)-block-poly(lactide) copolymer elastomers

Batch ring opening transesterification copolymerization of ε-caprolactone and ε-decalactone was used to generate statistical copolymers over a wide range of compositions and molar masses. Reactivity ratios determined for this monomer pair, r CL = 5.9 and r DL = 0.03, reveal ε-caprolactone is added preferentially regardless of the propagating chain end. Relative to poly(ε-caprolactone) the crystallinity and melting point of these statistical copolymers were depressed by the addition of ε-decalactone; copolymers containing greater than 31 mol% (46 wt%) ε-decalactone were amorphous. Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) triblock polymers were also prepared and used to explore the influence of midblock composition on the temperature dependent Flory-Huggins interaction parameter (χ). In addition, uniaxial extension tests were used to determine the effects of midblock composition, poly(lactide) content, and molar mass on the mechanical properties of these new elastomeric triblocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗