Reinforcement Learning for Charged Particle Beam Control to Minimize Injection Mismatch in Particle Accelerators
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Schoefer, Vincent.
Explore the source record for details and available documents.
We describe methods for measuring the three-dimensional stable spin vector at the STAR detector (using STAR local polarimetry) and at the proton-Carbon coulomb nuclear interaction polarimeter at the 12 o’clock RHIC interaction region (hereafter the pC polarimeter). These polarimeters can only provide information about the two transverse components of the stable spin direction. If a known, local spin rotation can be generated at the location of the polarimeter, then the longitudinal component can be calculated by comparing the transverse components before and after the rotation. At STAR the stable spin direction can be rotated using the helical dipole spin rotators. At the pC polarimeter, a local horizontal orbital angle is introduced to rotate the stable spin direction. The stable spin direction at the hydrogen jet polarimeter is determined by transporting the spin vector at the pC polarimeter target to the location of the jet using a Zgoubi model. We describe the measurement and analysis methods used and present results of measurements made during RHIC Run 22.
Here, an AC dipole has been installed in the AGS booster as part of polarized beam developments for the future Electron Ion Collider (EIC). This will allow preserving helion beam polarization through two intrinsic resonances during acceleration to an energy corresponding to |$Gγ$| = 10.5. AC dipoles can preserve polarization by forcing the beam to undergo large amplitude vertical betatron oscillations. These coherent oscillations cause all particles to sample the strong horizontal fields of quadrupoles, and result in a full spin flip. In preparation for the AC dipole being used for polarized helions, it was first commissioned with polarized protons. The proton extraction energy was raised to allow protons to cross $Gγ$ = 0 + $v_y$ = 4.8087. As an artifact of the experiment using polarized protons, the booster settings for bunch extraction interfered with the coherent oscillations and limited the maximum coherent amplitude. This interference will be well separated in the case of polarized helions. Polarized protons crossed the $Gγ$ = 0 + $v_y$ intrinsic resonance with a full spin flip through use of the AC dipole. Simulations of the resonance crossing using Zgoubi accurately predict the polarization relative to the coherent amplitude.
Polarized helion collisions are part of the Electron Ion Collider physics program. The required intensity at collision is 1.2×10 11 at 70% polarization. The EBIS source is expected to provide 2×10 11 helions/bunch at 80% polarization. To reach the EIC requirements, the AGS at extraction will need 1.5×10 11 helions/bunch and negligible polarization loss. A critical point for polarization loss in the injectors is the AGS injection energy, which can occur at either |Gγ| = 7.5 or |Gγ| = 10.5. Injection at |Gγ| = 7.5 will result in 80% beam loss and 2.5% polarization up to |Gγ| = 10.5.
Explore the source record for details and available documents.
Spin matrices are computed, and spin $\vec{n}_0$ vector is transported, from p-C polarimeter to H-Jet, and from Blue and Yellow upstream rotators to IP6.
RHIC operations with gold beams at energies below the design injection energy of 10.5 GeV/N requires the injection of long bunches to mitigate the effects of IBS and space charge [1]. Bunch lengths can be up to 60 ns in length at 3.85 GeV/N (to be compared to normal 35 ns proton bunch e s at 25 GeV). Injection of such long bunches requires revisiting the details of the injection magnet pulse to insure sufficient transfer efficiency from the AGS to RHIC. This note details beam-based measurements of the deflection provided by the injection kicker magnet as a function of bunch arrival time using two different terminating resistors: a 25 Ω resistor, which has been standard for several years, and a 40 Ω resistor, which more nearly represents a matched termination. The measured deflection curves are then used as inputs into a simple simulation to estimate the effects of the kicker rise time and shape (flatness) on the transverse emittance of the injected and circulating bunches. The simulat ions indicate that there is a 12 % intrinsic vertical emittance growth associated with the standard 25 Ω kicker configuration not only for the long low energy bunches, but also for nominal 35 ns long polarized proton bunches at the nominal 25 GeV injection energy.