Search NASA⌕ Search

Engineering topics

Schoop, Leslie M.

Publications and source records attributed to Schoop, Leslie M..

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Transport signatures of Fermi arcs at twin boundaries in Weyl materials

One of the most striking signatures of Weyl fermions in solid-state systems is their surface Fermi arcs. Fermi arcs can also be localized at internal twin boundaries where two Weyl materials of opposite chirality meet. In this work, we derive constraints on the topology and connectivity of these “internal Fermi arcs.” We show that internal Fermi arcs can exhibit transport signatures, and we propose two probes: quantum oscillations and a quantized chiral magnetic current. We propose merohedrally twinned B20 materials as candidates to host internal Fermi arcs, verified through both model and calculations. Our theoretical investigation sheds light on the topological features and motivates experimental studies on the intriguing physics of internal Fermi arcs. Published by the American Physical Society 2025

Kaushik, Sahal (ORCID:0000000286435528)↗
DOE OSTI2024

Realignment and suppression of charge density waves in the rare-earth tritellurides 𝑅⁢Te 3 (𝑅 = La, Gd, Er)

The rare-earth tritellurides have a rich phase diagram that includes charge density waves (CDWs), superconductivity, and magnetic order, offering a platform to study the interplay between these phases on a square-net system. Prior studies have shown that defects can affect the CDW characteristics in these materials, yet coupling between the CDW order and the underlying microstructure has not been studied at the nanoscale. Here we use scanning transmission electron microscopy at cryogenic temperatures to directly visualize the effects of defects on the CDW order and provide a spatially resolved microscopic correlation between the CDW transition and structural defects. Here, we show that in the presence of extended defects, such as dislocations and stacking faults, the weak orthorhombicity of the rare-earth tritellurides is lost and the material becomes pseudotetragonal. Since the orthorhombicity acts as a symmetry breaking field for the CDW transitions in rare-earth tritellurides, the presence of these extended defects modulates the energetics of the CDWs and suppresses the ground-state CDW phase at low temperature.

Charge density waves↗
DOE OSTI2024

Edge supercurrent reveals competition between condensates in a Weyl superconductor

In topological materials, the edge states are readily distinguished from the bulk states. The situation where a topological semimetal becomes superconducting so that Cooper pairs occupy both the bulk and the edge states is not well understood. In particular, we do not know if we can force their pairing symmetries to be different. Here we show that, when supercurrent is injected into the superconducting Weyl semimetal MoTe 2 from Nb contacts, the invasive s-wave pairing potential from Nb is incompatible with the intrinsic Cooper pair condensate in MoTe 2 . This incompatibility leads to strong stochasticity in the switching current and an unusual anti-hysteretic behaviour in the current–voltage loops. There is also an asymmetry in the edge oscillations where, as the magnetic field crosses zero, the phase noise switches from one with a noisy spectrum to one that is noise free. Furthermore, using the noise spectrum as a guide, we track the anomalous features to field-induced switching of the device gap function between s-wave symmetry and the unconventional symmetry intrinsic to MoTe 2 . We infer that the behaviour of the gap function along the edges is different from that in the bulk.

Superconducting properties and materials↗
DOE OSTI2023

Synthesis of an aqueous, air-stable, superconducting 1T'-WS 2 monolayer

Liquid-phase chemical exfoliation can achieve industry-scale production of two-dimensional (2D) materials for a wide range of applications. However, many 2D materials with potential applications in quantum technologies often fail to leave the laboratory setting because of their air sensitivity and depreciation of physical performance after chemical processing. We report a simple chemical exfoliation method to create a stable, aqueous, surfactant-free, superconducting ink containing phase-pure 1T'-WS 2 monolayers that are isostructural to the air-sensitive topological insulator 1T'-WTe 2 . The printed film is metallic at room temperature and superconducting below 7.3 kelvin, shows strong anisotropic unconventional superconducting behavior with an in-plane and out-of-plane upper critical magnetic field of 30.1 and 5.3 tesla, and is stable at ambient conditions for at least 30 days. Our results show that chemical processing can make nontrivial 2D materials that were formerly only studied in laboratories commercially accessible.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unlocking High Capacity and Fast Na + Diffusion of H x CrS 2 by Proton-Exchange Pretreatment

This study presents a new material, “H x CrS 2 " (denotes approximate composition) formed by proton-exchange of NaCrS 2 which has a measured capacity of 728 mAh g -1 with significant improvements to capacity retention, sustaining over 700 mAh g -1 during cycling experiments. This is the highest reported capacity for a transition metal sulfide electrode and outperforms the most promising proposed sodium anodes to date. H x CrS 2 exhibits a biphasic structure featuring alternating crystalline and amorphous lamella on the scale of a few nanometers. This unique structural motif enables reversible access to Cr redox in the material resulting in higher capacities than seen in the parent structure which features only S redox. In conclusion, pretreatment by proton-exchange offers a route to materials such as H x CrS 2 which provide fast diffusion and high capacities for sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Photoinduced band renormalization effects in the topological nodal-line semimetal ZrSiS

Out-of-equilibrium effects provide an elegant pathway for probing and understanding the underlying physics of topological materials. In particular, controlling electronic band structure properties using ultrafast optical pulses has shown promise for creating exotic states of matter. Of recent interest is band renormalization in Dirac and Weyl semimetals as it leads to direct physical observables through the enhancement of the effective mass or in the shift of resonant energies. Here, in this work, we provide experimental and theoretical signatures of photoinduced renormalization of the electronic band structure in the topological nodal-line semimetal ZrSiS. Specifically, we show how the change in the transient reflectivity spectra under femtosecond optical excitations is induced by out-of-equilibrium effects that renormalize the kinetic energy of electrons. We associate the observed spectral features with an enhancement of the effective mass and to a redshift of the resonant frequency as a function of pump field strength. Finally, we show that the transient relaxation dynamics of the reflectivity is primarily an electronic effect with a negligible phononic contribution. Our study presents conclusive modifications of electronic properties in ZrSiS using ultrashort pulses and demonstrates the potential of this approach in creating photoinduced phases in topological quantum matter through an all-optical route.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Phase tuning of multiple Andreev reflections of Dirac fermions and the Josephson supercurrent in Al–MoTe 2 –Al junctions

When an electron is incident on a superconductor from a metal, it is reflected as a hole in a process called Andreev reflection. If the metal N is sandwiched between two superconductors S in an SNS junction, multiple Andreev reflections (MARs) occur. We have found that, in SNS junctions with high transparency (τ → 1) based on the Dirac semimetal MoTe 2 , the MAR features are observed with exceptional resolution. By tuning the phase difference φ between the bracketing Al superconductors, we establish that the MARs coexist with a Josephson supercurrent I s =I A sin φ. As we vary the junction voltage V, the supercurrent amplitude I A varies in step with the MAR order n, revealing a direct relation between them. Two successive Andreev reflections serve to shuttle a Cooper pair across the junction. If the pair is shuttled coherently, it contributes to I s . The experiment measures the fraction of pairs shuttled coherently vs. V. Surprisingly, superconductivity in MoTe 2 does not affect the MAR features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Evidence for a monolayer excitonic insulator

The interplay between topology and correlations can generate a variety of quantum phases, many of which remain to be explored. Recent advances have identified monolayer WTe 2 as a promising material for doing so in a highly tunable fashion. The ground state of this two-dimensional crystal can be electrostatically tuned from a quantum spin Hall insulator to a superconductor. However, much remains unknown about the gap-opening mechanism of the insulating state. In this work, we report evidence that the quantum spin Hall insulator is also an excitonic insulator, arising from the spontaneous formation of electron–hole bound states, namely excitons. We reveal the presence of an intrinsic insulating state at the charge neutrality point in clean samples and confirm the correlated nature of this charge-neutral insulator by tunnelling spectroscopy. We provide evidence against alternative scenarios of a band insulator or a localized insulator and support the existence of an excitonic insulator phase in the clean limit. These observations lay the foundation for understanding a new class of correlated insulators with nontrivial topology and identify monolayer WTe 2 as a promising candidate for exploring quantum phases of ground-state excitons.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Band Engineering of Dirac Semimetals Using Charge Density Waves

New developments in the field of topological matter are often driven by materials discovery, including novel topological insulators, Dirac semimetals and Weyl semimetals. In the last few years, large efforts have been performed to classify all known inorganic materials with respect to their topology. Unfortunately, a large number of topological materials suffer from non-ideal band structures. For example, topological bands are frequently convoluted with trivial ones, and band structure features of interest can appear far below the Fermi level. This leaves just a handful of materials that are intensively studied. Finding strategies to design new topological materials is a solution. Here we introduce a new mechanism that is based on charge density waves and non-symmorphic symmetry to design an idealized Dirac semimetal. We then show experimentally that the antiferromagnetic compound GdSb 0.46 Te 1.48 is a nearly ideal Dirac semimetal based on the proposed mechanism, meaning that most interfering bands at the Fermi level are suppressed. Finally, its highly unusual transport behavior points to a thus far unknown regime, in which Dirac carriers with Fermi energy very close to the node seem to gradually localize in the presence of lattice and magnetic disorder.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A cleanroom in a glovebox

The exploration of new materials, novel quantum phases, and devices requires ways to prepare cleaner samples with smaller feature sizes. Initially, this meant the use of a cleanroom that limits the amount and size of dust particles. However, many materials are highly sensitive to oxygen and water in the air. Furthermore, the ever-increasing demand for a quantum workforce, trained and able to use the equipment for creating and characterizing materials, calls for a dramatic reduction in the cost to create and operate such facilities. To this end, we present our cleanroom-in-a-glovebox, a system that allows for the fabrication and characterization of devices in an inert argon atmosphere. Additionally, we demonstrate the ability to perform a wide range of characterization as well as fabrication steps, without the need for a dedicated room, all in an argon environment. Finally, we discuss the custom-built antechamber attached to the back of the glovebox. This antechamber allows the glovebox to interface with ultra-high vacuum equipment such as molecular-beam epitaxy and scanning tunneling microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

High mobility in a van der Waals layered antiferromagnetic metal

Van der Waals (vdW) materials with magnetic order have been heavily pursued for fundamental physics as well as for device design. Despite the rapid advances, so far, they are mainly insulating or semiconducting, and none of them has a high electronic mobility—a property that is rare in layered vdW materials in general. The realization of a high-mobility vdW material that also exhibits magnetic order would open the possibility for novel magnetic twistronic or spintronic devices. Here, we report very high carrier mobility in the layered vdW antiferromagnet GdTe 3 . The electron mobility is beyond 60,000 cm 2 V –1 s –1 , which is the highest among all known layered magnetic materials, to the best of our knowledge. Among all known vdW materials, the mobility of bulk GdTe 3 is comparable to that of black phosphorus. By mechanical exfoliation, we further demonstrate that GdTe 3 can be exfoliated to ultrathin flakes of three monolayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗