Search NASA⌕ Search

Engineering topics

Schowengerdt, R.

Publications and source records attributed to Schowengerdt, R..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

LANDSAT-4 Thematic Mapper Modulation Transfer Function (MTF) evaluation

The Modulation Transfer Function (MTF) for thematic mapping (TM) bands 3, 4, 5 and 7 is reliably estimated with the San Mateo Bridge target in the 12/31/82 scene. These results are to be compared with those from the 8/12/83 scene. Bands 1, 2 and 6 are to be analyzed with a different target possessing greater contrast. This may be possible with the underflight data comparison currently underway. The registration of this data to the TM image of 8/12/83 for a region arround the Stockton sewage pond east of San Francisco has begun. This particular approach has the advantage that the full two-dimensional MFT will be measured instead of the MFT in only one azimuth as reported.

Schowengerdt, R.↗
NASA NTRS1985

MTF Analysis of LANDSAT-4 Thematic Mapper

The spatial radiance distribution of a ground target must be known to a resolution at least four to five times greater than that of the system under test when measuring a satellite sensor's modulation transfer function. Calibration of the target requires either the use of man-made special purpose targets with known properties, e.g., a small reflective mirror or a dark-light linear pattern such as line or edge, or use of relatively high resolution underflight imagery to calibrate an arbitrary ground scene. Both approaches are to be used, in addition a technique that utilizes an analytical model of the scene spatial frequency power spectrum is being investigated as an alternative to calibration of the scene.

Schowengerdt, R.↗
NASA NTRS1985

Operational MTF for Landsat Thematic Mapper

The Landsat Thematic Mapper (TM) represents significant improvements in spatial, spectral, and radiometric resolution over the older Multispectral Scanner System (MSS). For the last three years, NASA has conducted the Landsat Image Data Quality Analysis (LIDQA) program to quantify the performance of the TM on the Landsat-4 and 5 spacecraft. As part of this program, analysis of the TM imagery to extract the overall system modulation transfer function (MTF) has been performed. In this paper, the San Mateo Bridge in San Francisco is described as a target for calculation of the line spread function and MTF. The analysis of two TM scenes, one from 12/31/82 and one from 8/12/83, yielded effective-instantaneous-field-of-views (EIFOVs) of 40.8 meters and 48.6 meters, respectively. These values are compared with the 33.8 meter EIFOV predicted by component modelling of the TM sensor, and the differences discussed.

Schowengerdt, R.↗
NASA NTRS1984

LANDSAT-4 Thematic Mapper Modulation Transfer Function (MFT) evaluation

The techniques used in the two-image comparison of TM data and 7-meter aerial data acquired over San Francisco on August 12, 1983 during LANDSAT 4 operation were refined. Analysis of one area is complete and reported herein; analysis of a second area is in progress. A large test target for measurement of the LANDSAT 5 MTF at the White Sands Missile Range, New Mexico was constructed.

Schowengerdt, R.↗
NASA NTRS1984

LANDSAT-4 Thematic Mapper Modulation Transfer Function (MTF) evaluation

Results of MTF analysis of imagery of the San Mateo Bridge are consistent on two TM image dates for bands 4,5, and 7. There are indications that bands 1, 2, and 3 suffer from low image contrast, and consequently low signal to noise in the derived MTFs. The two image analysis produced reasonable results along +45 deg and -45 deg azimuths in the 2-D MTF, but poor results along the 0 deg and 90 deg azimuths. The effective instantaneous field of view is given for each band, and the image contrast for water and the bridge are compared. Graphs show overall TM system MTFs.

Schowengerdt, R.↗
NASA NTRS1984

Modulation-transfer-function analysis for sampled image systems

Sampling generally causes the response of a digital imaging system to be locally shift-variant and not directly amenable to Modulation Transfer Function (MTF) analysis. However, this paper demonstrates that a meaningful system response can be calculated by averaging over an ensemble of point-source system inputs to yield an MTF which accounts for the combined effects of image formation, sampling, and image reconstruction. As an illustration, the MTF of the Landsat MSS system is analyzed to reveal an average effective instantaneous field of view which is significantly larger than the commonly accepted value, particularly in the along-track direction where undersampling contributes markedly to an MTF reduction and resultant increase in image blur.

Park, S. K.↗
NASA NTRS1984

MTF Analysis of LANDSAT-4 Thematic Mapper

A research program to measure the LANDSAT 4 Thematic Mapper (TM) modulation transfer function (MTF) is described. Measurement of a satellite sensor's MTF requires the use of a calibrated ground target, i.e., the spatial radiance distribution of the target must be known to a resolution at least four to five times greater than that of the system under test. A small reflective mirror or a dark light linear pattern such as line or edge, and relatively high resolution underflight imagery are used to calibrate the target. A technique that utilizes an analytical model for the scene spatial frequency power spectrum will be investigated as an alternative to calibration of the scene. The test sites and analysis techniques are also described.

Schowengerdt, R.↗
NASA NTRS1984

Topics in the two-dimensional sampling and reconstruction of images

Mathematical analysis of image sampling and interpolative reconstruction is summarized and extended to two dimensions for application to data acquired from satellite sensors such as the Thematic mapper and SPOT. It is shown that sample-scene phase influences the reconstruction of sampled images, adds a considerable blur to the average system point spread function, and decreases the average system modulation transfer function. It is also determined that the parametric bicubic interpolator with alpha = -0.5 is more radiometrically accurate than the conventional bicubic interpolator with alpha = -1, and this at no additional cost. Finally, the parametric bicubic interpolator is found to be suitable for adaptive implementation by relating the alpha parameter to the local frequency content of an image.

Schowengerdt, R.↗
NASA NTRS1983

LANDSAT-4 thematic mapper Modulation Transfer Function (MTF) evaluation

A power spectrum (PS) analysis technique was used to compare thematic mapper (TM) A and P-tape data for a Washington, DC scene in two orthogonal directions, along scan and along track. The resulting effective modulation transfer functions (MTF) between the A and P data are repeatable from area to area and consistent with theoretical expectations. The average x-direction (along scan) MTF calculated with the PS technique is compared to the MTF of the cubic convolution resampling function used to create P data from A data. The two curves are nearly identical, indicating that the major factor affecting the image quality of P data relative to A data is the cubic convolution resampling.

Schowengerdt, R.↗
NASA NTRS1983

MTF analysis of LANDSAT-4 Thematic Mapper

The spatial radiance distribution of a ground target must be known to a resolution at least four to five times greater than that of the system under test when measuring a satellite sensor's modulation transfer function. Calibration of the target requires either the use of man-made special purpose targets with known properties, e.g., a small reflective mirror or a dark-light linear pattern such as line or edge, or use of relatively high resolution underflight imagery to calibrate an arbitrary ground scene. Both approaches are to be used in addition a technique that utilizes an analytical model for the scene spatial frequency power spectrum is being investigated as an alternative to calibration of the scene.

Schowengerdt, R.↗